ONEVAN Cordless Brushless Impact Wrench (Model sku006213) User Manual

Inleiding

Thank you for choosing the ONEVAN Cordless Brushless Impact Wrench. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new tool. Please read it thoroughly before first use and keep it for future reference.

Algemene Veiligheidsinstruksies

WAARSKUWING: Lees alle veiligheidswaarskuwings, instruksies, illustrasies en spesifikasies wat by hierdie elektriese gereedskap voorsien word. Versuim om alle instruksies hieronder gelys te volg, kan elektriese skok, brand en/of ernstige beserings tot gevolg hê.

Werksarea Veiligheid

• Hou werkarea skoon en goed belig. Deurmekaar of donker areas nooi ongelukke uit.
• Moenie elektriese gereedskap in plofbare atmosfeer gebruik nie, soos in die teenwoordigheid van vlambare vloeistowwe, gasse of stof. Elektriese gereedskap skep vonke wat die stof of dampe kan aansteek.
• Hou kinders en omstanders weg terwyl 'n elektriese gereedskap gebruik word. Afleidings kan veroorsaak dat jy beheer verloor.

Elektriese veiligheid

• Kraggereedskapproppe moet by die uitlaat pas. Moet nooit die prop op enige manier verander nie.
• Vermy liggaamskontak met geaarde of geaarde oppervlaktes, soos pype, verkoelers, reekse en yskaste. Daar is 'n verhoogde risiko van elektriese skok as jou liggaam geaard of geaard is.
• Moenie elektriese gereedskap aan reën of nat toestande blootstel nie. Water wat 'n elektriese gereedskap binnedring, sal die risiko van elektriese skok verhoog.

Persoonlike veiligheid

• Always wear eye protection. Use appropriate safety equipment such as dust mask, non-skid safety shoes, hard hat, or hearing protection when necessary.
• Bly wakker, kyk wat jy doen en gebruik gesonde verstand wanneer jy 'n elektriese gereedskap gebruik.
• Voorkom onbedoelde begin. Maak seker dat die skakelaar in die af-posisie is voordat dit aan die batterypak gekoppel word, die gereedskap optel of dra.

Pakketinhoud

Verifieer asseblief tydens uitpak dat al die items wat hieronder gelys word, teenwoordig en onbeskadig is:

• 1x ONEVAN Cordless Brushless Impact Wrench
• 2x 3.0Ah Lithium-ion Batteries
• 1x Batterylaaier
• 6x Sockets (14mm, 17mm, 18mm, 19mm, 21mm, 22mm)
• Additional accessories (e.g., drill chuck, screwdriver bit adapter, retaining ring, pin)

Image: ONEVAN Cordless Impact Wrench with included accessories, including two batteries, a charger, and a set of six sockets (14mm, 17mm, 18mm, 19mm, 21mm, 22mm), along with a drill chuck and screwdriver bit adapter.

Produk Kenmerke

• Hoëprestasie-borsellose motor: The ONEVAN impact wrench is equipped with an advanced brushless motor, offering higher efficiency (20-30% higher than traditional brush motors), reduced wear, longer lifespan, and stable power output without smoke or sparks. This design minimizes maintenance costs and enhances durability.

Image: Internal diagram of the brushless motor, emphasizing its benefits such as high power, low energy loss, extended lifespan, and superior efficiency compared to brushed motors.
• Powerful Torque and Variable Speed: Delivers a maximum tightening torque of 280 N.m and a maximum loosening torque of 300 N.m. The tool features 2 adjustable speed levels for both forward and reverse rotation, allowing precise control by varying pressure on the trigger.
• Long-Lasting 3.0Ah Batteries: Comes with two high-capacity 3000 mAh Lithium-ion batteries, providing ample power for extended outdoor use. Integrated battery chip technology ensures reduced power loss and faster charging. A built-in battery indicator keeps you informed of the charge level.


Beeld: Gedetailleerd view of the ONEVAN Li-ion battery, illustrating its internal structure and multiple protection mechanisms including overcurrent, voltage, short circuit, chip, charging, temperature regulation, and over-discharge protection, ensuring long-term work capability.

• Forward/Reverse with Auto-Stop Function: Equipped with a locking system and distinct forward and reverse modes. In reverse mode, the auto-stop function activates once a nut or bolt is loosened, reducing speed and torque to prevent the fastener from falling off completely.


Image: Visual guide to the forward/reverse button positions and the automatic stop function in reverse, which prevents fasteners from completely detaching once loosened.

• Ingeboude LED-lig: An integrated LED light illuminates the work area, improving visibility in dark or confined spaces.

Image: The impact wrench operating in a dimly lit environment, demonstrating how the built-in LED light effectively illuminates the working area for enhanced visibility.
• Multifunksionele gebruik: Suitable for various applications including car tire removal, household appliance maintenance, heavy equipment assembly, and general fastening tasks. Can function as an impact wrench, impact drill (with appropriate adapter), or screwdriver.


Image: An annotated diagram of the ONEVAN impact wrench, highlighting its key components such as the 1/2-inch square drive, LED light, variable speed switch, ergonomic handle, forward/reverse button, and the 3.0Ah Li-ion battery pack.

Opstelling

1. Laai die battery

1. Maak seker dat die battery ten volle gelaai is voor die eerste gebruik.
2. Koppel die laaier aan 'n standaard kragpunt.
3. Skuif die batterypak op die laaier totdat dit in plek klik.
4. The charger indicator light will show the charging status. Refer to the charger manual for specific light indications.
5. Sodra dit volledig gelaai is, ontkoppel die battery van die laaier en trek die laaier uit die stopcontact.

2. Installering van die Battery Pack

1. Align the battery pack with the receptacle at the base of the impact wrench handle.
2. Slide the battery pack into the handle until it locks securely into place. Ensure it is firmly seated to prevent accidental dislodgement during operation.
3. Om die battery te verwyder, druk die ontgrendelknoppie(s) aan die kante van die batterypak en skuif dit uit.

3. Attaching Sockets/Accessories

1. Maak seker dat die gereedskap afgeskakel is en die battery verwyder is voordat u bykomstighede aanheg of verwyder.
2. Align the square drive of the socket with the 1/2-inch square drive anvil on the impact wrench.
3. Push the socket firmly onto the anvil until it clicks into place. Some sockets may require aligning with a detent pin or friction ring.
4. To remove, pull the socket off the anvil. For stubborn sockets, a slight twisting motion may help.

Bedryfsinstruksies

1. Aanskakel/Afskakel en Spoedbeheer

• To turn on the tool, press the variable speed trigger switch. The tool speed increases with increased trigger pressure.
• Om die gereedskap af te skakel, laat die snellerskakelaar los.
• The tool features 2 speed settings. Use the speed selector button (if present, typically near the trigger) to cycle between low and high speeds.

2. Vorentoe/Agtertoe Rotasie

• The forward/reverse button (typically a lever above the trigger) controls the direction of rotation.
• Push the button to the left for forward rotation (tightening).
• Push the button to the right for reverse rotation (loosening).
• When the button is in the center position, the trigger is locked, preventing accidental startup. Always engage the lock when not in use or when changing accessories.

3. Using the Auto-Stop Function (Reverse Mode)

• When loosening fasteners, select reverse rotation.
• As the fastener becomes loose, the tool's auto-stop function will reduce speed and torque. This helps prevent the nut or bolt from spinning off completely and falling.
• Monitor the fastener and manually stop the tool when the desired looseness is achieved.

4. LED Werkslig

• The built-in LED light activates automatically when the trigger is pressed, illuminating the work area.
• It will turn off shortly after the trigger is released.

Onderhoud

Regular maintenance ensures the longevity and optimal performance of your ONEVAN impact wrench.

Skoonmaak

• Ontkoppel altyd die batterypak voordat u enige skoonmaak of onderhoud uitvoer.
• Gebruik 'n sagte, damp lap om die buitekant van die gereedskap skoon te maak. Moenie harde chemikalieë of skuurmiddels gebruik nie.
• Hou die ventilasie-openinge vry van stof en puin om oorverhitting te voorkom. Gebruik saamgeperste lug indien nodig.

Battery sorg

• Berg batterye in 'n koel, droë plek weg van direkte sonlig en uiterste temperature.
• Moenie batterye vir lang tye in 'n ontlaaide toestand bêre nie. Laai hulle gereeld as hulle nie gebruik word nie.
• Vermy om batterye te laat val of aan impak bloot te stel.

Algemene inspeksie

• Periodically inspect the tool for any signs of damage, loose screws, or worn parts.
• Ensure the square drive anvil is free from excessive wear or damage.
• If any damage is found, do not operate the tool. Contact customer support for assistance.

Probleemoplossing

Spesifikasies

Waarborg en Ondersteuning

Waarborg inligting

ONEVAN products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official ONEVAN webwebwerf. Bewaar u aankoopbewys as bewys van aankoop vir waarborgeise.

Kliënte ondersteuning

If you have any questions, require technical assistance, or need to report a problem with your ONEVAN Cordless Brushless Impact Wrench, please contact our customer support team. Contact details can typically be found on the product packaging, the official ONEVAN webwebwerf, of deur jou kleinhandelaar.

When contacting support, please have your model number (sku006213) and purchase date ready.