iMaihom 65W LED Security Light with Motion Sensor

Inleiding

This manual provides comprehensive instructions for the installation, operation, and maintenance of your iMaihom 65W LED Security Light with Motion Sensor (Model BDP60G-3). Designed for outdoor use, this hardwired floodlight offers powerful illumination with advanced motion detection and dusk-to-dawn capabilities. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

Produk Kenmerke

• Wide Lighting Area: Three adjustable heads provide extensive illumination coverage up to 1150 sq. ft., ideal for yards, gardens, and driveways.
• Highly Sensitive Motion Sensor: Promptly activates lights upon detecting movement, enhancing security.
• Skemer tot dagbreek-modus: Automatically turns off during the day, lights up at night at 30% brightness, and increases to 100% brightness upon motion detection.
• Maklike installasie: Designed for straightforward hardwired connection to a mounting bracket.
• IP65 Waterdigte Gradering: Constructed from high-quality ABS material, ensuring durability and reliable performance in various weather conditions, including heavy rain and snow.

Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin.

• iMaihom 65W LED Security Light (1 unit)
• Mounting Hardware (screws, expansion rubber plugs, EVA gasket, silicone gasket, wire nuts)
• Instruksie Handleiding

Image: The iMaihom 65W LED Security Light, showing its three adjustable light heads and integrated motion sensor.

Veiligheidsinligting

WAARSKUWING: Risk of electric shock. Disconnect power at the fuse or circuit breaker before installation or servicing. All wiring connections must be in accordance with local and national electrical codes. If you are unfamiliar with electrical wiring, consult a qualified electrician.

• Maak seker dat die monteeroppervlak die gewig van die toebehore kan ondersteun.
• Moenie aan 'n dimmer skakelaar koppel nie.
• Do not look directly into the LED lights when illuminated.

Opstelling en installasie

This security light is designed for hardwired installation. Follow these steps carefully:

1. Skakel krag af: Before starting, ensure the power supply to the junction box is turned off at the circuit breaker.
2. Heg monteringsbeugel aan: Secure the mounting bracket to the junction box using the provided screws. Ensure it is firmly attached.
3. Koppel bedrading:
   • Connect the black wire from the fixture to the black (live) wire from the junction box.
   • Verbind die wit draad van die toebehore aan die wit (neutrale) draad van die aansluitboks.
   • Connect the green (ground) wire from the fixture to the bare copper or green (ground) wire from the junction box.
   • Use the provided wire nuts to secure all connections.
4. Monteer die armatuur: Align the fixture with the mounting bracket and secure it using the long machine screw. Ensure the foam gasket is properly seated to prevent water ingress.
5. Verstel ligkoppe: Loosen the screws on the side light heads and the motion sensor to adjust their angles as desired. Tighten screws once adjusted.
6. Herstel krag: Skakel die krag weer aan by die stroombreker.

Image: Detailed diagram illustrating the three-step installation process, including securing the mounting bracket, connecting wires, and attaching the light fixture.

Bedryfsinstruksies

The iMaihom security light offers multiple operating modes controlled by switches on the motion sensor unit.

Mode seleksie

• Sensor Mode (Motion Only): The light remains off until motion is detected. It will then illuminate at 100% brightness for a set duration.
• Dusk to Dawn Mode (D2D): The light automatically turns on at 30% brightness when it gets dark and stays on. Upon detecting motion, it brightens to 100% for a set duration, then returns to 30% brightness.
• Toets af: Used during installation to check the motion sensor's range and light coverage. The light will turn on for a short period when motion is detected, regardless of ambient light.

Aanpassings

The motion sensor unit features dials for adjusting TIME, DIST (distance/sensitivity), and MODE.

• TYD: Verstel hoe lank die lig aanbly nadat beweging bespeur is (bv. 10 sekondes tot 10 minute).
• DIST (Sensitivity): Controls the detection range of the motion sensor (e.g., Low, Medium, High).
• WYSE: Selects between Sensor, D2D, and Test modes.

Beeld: Nabyskoot view of the motion sensor's control dials for Mode, Time, and Distance settings.

Image: Visual representation of the Dusk to Dawn mode, showing the light turning on at 30% brightness at night and increasing tot 100% na bewegingsopsporing.

Onderhoud

The iMaihom LED Security Light is designed for minimal maintenance.

• Skoonmaak: Vee die ligtoestel en bewegingsensorlens gereeld af met 'n sagte, damp lap om vuiligheid en puin te verwyder. Moenie skuurmiddels of oplosmiddels gebruik nie.
• Weerbeskerming: The IP65 waterproof rating ensures protection against dust and water jets. No special weatherproofing is required under normal conditions.
• Inspeksie: Annually inspect wiring and mounting for any signs of wear, damage, or loosening.

Image: The iMaihom security light demonstrating its IP65 waterproof capability during rainfall.

Probleemoplossing

If your iMaihom LED Security Light is not functioning as expected, refer to the following common issues and solutions:

Spesifikasies

Image: Diagram detailing the dimensions of the iMaihom 65W LED Security Light.

Waarborg en Ondersteuning

The iMaihom 65W LED Security Light (Model BDP60G-3) comes with a 2 jaar vervaardiger se waarborg.

For technical support, troubleshooting assistance, or warranty claims, please contact iMaihom customer service. You can find more information and contact details on the official iMaihom store page: iMaihom Store.