Inleiding
This manual provides detailed instructions for the safe and efficient operation of your Longer Ray5 20000mW Laser Engraver with Air Assist Kit. Please read this manual thoroughly before using the device to ensure proper setup, operation, and maintenance. Retain this manual for future reference.
Veiligheidsinligting
WAARSKUWING: Laser engravers are powerful tools that can cause serious injury if not used correctly. Always follow these safety guidelines:
- Always wear appropriate laser safety goggles when operating the machine.
- Never look directly into the laser beam or at its reflection.
- Ensure the work area is well-ventilated to dissipate fumes and smoke.
- Hou vlambare materiale weg van die laser se pad.
- Moenie die masjien sonder toesig laat tydens werking nie.
- Maak seker dat die masjien op 'n stabiele, gelyk oppervlak geplaas word.
- Hou kinders en troeteldiere weg van die operasionele area.
- Ontkoppel die krag voordat enige onderhoud of aanpassings uitgevoer word.
- Vergewis uself van noodstopprosedures.
Pakketinhoud
Verifieer dat alle komponente in die pakket teenwoordig is:
- Longer Ray5 20000mW Laser Engraver Unit
- Lughulppomp
- Lugondersteunende spuitstuk en buise
- Kragadapter
- USB kabel
- Veiligheidsbril
- Gebruikershandleiding (hierdie dokument)
- Material Samples (may vary)
Image: Air assist kit components including the pump, nozzle, and tubing.
Opstelling
- Uitpak: Verwyder alle komponente versigtig uit die verpakking.
- Vergadering: Follow the included quick start guide for assembling the main laser engraver frame and attaching the laser module.
- Air Assist Installation:
- Connect the air assist pump to the designated port on the laser module using the provided tubing.
- Ensure the air assist nozzle is securely attached to direct airflow to the engraving/cutting point.
- Kragverbinding: Connect the power adapter to the engraver and then to a suitable power outlet.
- Rekenaarverbinding: Connect the engraver to your computer via USB, or prepare for Wi-Fi/TF card connection.
Image: The Longer Ray5 laser engraver with the air assist pump connected and ready for operation.
Bedryfsinstruksies
1. Software and Connectivity
The Longer Ray5 supports various software and connection methods:
- Versoenbare sagteware: LaserGRBL and LightBurn.
- Bedryfstelsels: Supports Windows 7+, MacOS, and Linux.
- Verbindingsmetodes: Wi-Fi, USB, App, and TF card.
Image: Display showing the Longer Ray5's compatibility with LaserGRBL and LightBurn software, and various connection options including Wi-Fi, USB, App, and TF card across Windows, MacOS, and Linux operating systems.
2. Graveer- en snyvermoëns
The 20W diode laser offers high-efficiency performance for various materials.
- Sny: Capable of cutting up to 25mm of wood and 35mm of acrylic. It can also cut 0.05mm metal.
- Gravure: Engrave hundreds of colors on metallic steel and a wide range of other materials.
- Materiaal: Acrylic, metal, wood, stainless steel, and more.
Image: Illustration demonstrating the 20W diode laser's capability to cut 25mm wood and 35mm acrylic.
Beeld: Bvamples of engraving capabilities, showcasing over 380 colors on metallic surfaces and other DIY artworks.
Image: A collection of various items demonstrating the versatile material selection for engraving and cutting, including wood, metal, and acrylic.
3. Air Assist Function
The integrated air assist kit significantly improves cutting and engraving quality.
- Enhanced Cutting: The adjustable airflow (10-30L/min) suppresses smoke and dust, preventing laser energy attenuation and ensuring cleaner, smoother edges.
- Reduced Yellowing: Air assist helps prevent charring and yellowing on materials during laser processing, especially for wood and acrylic.
Image: A visual comparison showing the benefits of air assist, resulting in cleaner cuts and reduced processing time (e.g., 12 minutes with air assist vs. 20 minutes without).
4. Deurlopende Bedryf
The Longer Ray5 is designed for powerful continuous working capacity, supporting 24/7 continuous engraving. A single computer can control multiple machines.
Image: Depiction of multiple Longer Ray5 machines working simultaneously, illustrating continuous operation and the ability for one computer to control several units.
Onderhoud
Regular maintenance ensures optimal performance and extends the lifespan of your laser engraver.
- Maak die laserlens skoon: Periodically clean the laser lens with a soft, lint-free cloth and lens cleaning solution to maintain beam quality.
- Maak puin skoon: Remove any accumulated dust or debris from the work area and machine components.
- Check Belts and Rails: Inspect drive belts for tension and wear. Keep linear rails clean and lubricated as per manufacturer recommendations.
- Air Assist Filter: If your air assist pump has a filter, clean or replace it regularly to ensure efficient airflow.
- Firmware -opdaterings: Gaan die vervaardiger na webwebwerf vir enige beskikbare firmware-opdaterings om werkverrigting te verbeter of funksies by te voeg.
Probleemoplossing
Hierdie afdeling spreek algemene probleme aan wat jy mag teëkom.
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Laser skiet nie | Power not connected, software error, laser module fault. | Check power connections. Verify software settings. Contact support if laser module is suspected faulty. |
| Swak graveer-/snykwaliteit | Incorrect focus, dirty lens, wrong power/speed settings, material issues, no air assist. | Adjust laser focus. Clean the laser lens. Optimize power/speed settings for the material. Ensure air assist is active. |
| Masjien koppel nie aan rekenaar nie | USB cable issue, driver not installed, Wi-Fi configuration error. | Try a different USB port/cable. Install necessary drivers. Reconfigure Wi-Fi connection. |
| Excessive smoke/fumes | Insufficient ventilation, air assist not active or weak. | Ensure proper ventilation. Check air assist pump and tubing for blockages. Increase air assist flow. |
Spesifikasies
| Kenmerk | Detail |
|---|---|
| Modelnommer | RAY5 |
| Laser uitset krag | 20000mW (20W) |
| Laser tipe | Diodelaser |
| Cutting Depth (Wood) | Tot 25 mm |
| Cutting Depth (Acrylic) | Tot 35 mm |
| Metal Cutting Capability | 0.05 mm |
| Air Assist Flow | 10-30 L/min (Adjustable) |
| Raakskerm | 3.5 duim |
| Konnektiwiteit | Wi-Fi, USB, App, TF Card |
| Versoenbare sagteware | LaserGRBL, LightBurn |
| Ondersteunde bedryfstelsel | Windows 7+, MacOS, Linux |
| Vervaardiger | Langer |
| Datum Eerste Beskikbaar | 1 Augustus 2024 |
Waarborg en Ondersteuning
For warranty information and technical support, please refer to the official Longer webwebwerf of kontak hul kliëntediens direk. Bewaar u aankoopbewys as bewys van aankoop vir waarborgeise.
Aanlyn hulpbronne: Besoek die Longer Store on Amazon vir bykomende produkinligting en ondersteuning.