Pro-Ject Debut EVO 2 Oudiofiele Draaitafel Gebruikershandleiding

1. Inleiding

Welcome to the world of high-fidelity audio with your new Pro-Ject Debut EVO 2 Audiophile Turntable. This manual provides essential information for setting up, operating, and maintaining your turntable to ensure optimal performance and longevity. Please read it thoroughly before first use.

The Debut EVO 2 features a carbon fiber tonearm, electronic speed selection, and a pre-mounted Pick it MM EVO cartridge, designed for exceptional sound reproduction.

2. Opstelling

Proper setup is crucial for the best sound quality and to prevent damage to your turntable and records.

2.1 Uitpak en plasing

Carefully remove all components from the packaging. Retain the original packaging for future transport or service. Place the turntable on a stable, level surface, away from direct sunlight, heat sources, and vibrations.

Figure 2.1: Pro-Ject Debut EVO 2 Turntable with dust cover. Ensure the turntable is placed on a stable, level surface.

2.2 Skottel- en bandinstallasie

1. Place the main platter onto the spindle.
2. Locate the drive belt. Carefully stretch the belt around the motor pulley and the sub-platter rim.

Figuur 2.2: Close-up view of the sub-platter and belt drive system. The belt connects the motor pulley to the sub-platter for rotation.

2.3 Toonarm- en patroonopstelling

The Debut EVO 2 comes with a pre-mounted Pick it MM EVO cartridge. Follow these steps for tonearm setup:

1. Counterweight Adjustment: Gently push the counterweight onto the rear of the tonearm. With the anti-skating weight removed, balance the tonearm so it floats freely and horizontally. Lock the tonearm in its rest.
2. Tracking Force Setting: Rotate the tracking force scale ring to '0' while holding the counterweight steady. Then, rotate the counterweight (and scale ring) counter-clockwise until the desired tracking force (typically 1.8g for the Pick it MM EVO) is indicated.
3. Anti-skaats aanpassing: Attach the anti-skating weight to the small groove on the anti-skating stub. The recommended setting for the Pick it MM EVO cartridge is the second groove from the tonearm pivot.

Figure 2.3: Detail of the carbon fiber tonearm, showing the counterweight and anti-skating weight. These components are critical for proper cartridge tracking.

Figure 2.4: The pre-mounted Pick it MM EVO cartridge on the tonearm. This cartridge is designed to deliver lively and robust sound.

2.4 Verbindings

Connect the supplied phono cable to the RCA output jacks on the rear of the turntable and to the phono input (or line input via a phono preamplifier) of your amplifier. Ensure the ground wire is connected to the ground terminal on your ampverligter om hum te verminder.

Connect the power adapter to the turntable's power input and then to a suitable wall outlet.

Figure 2.5: Rear panel of the turntable with RCA output jacks and ground terminal. Proper connection to an amplifier is essential for audio output.

3. Bedryfsinstruksies

This section details the steps for playing records and using the turntable's features.

3.1 Power On and Speed Selection

Press the power button to turn on the turntable. The Debut EVO 2 features electronic speed selection. Use the speed selector switch (usually located on the plinth) to choose between 33 1/3 RPM, 45 RPM, or 78 RPM (requires a different belt and stylus, sold separately).

3.2 Speel 'n plaat

1. Plaas 'n rekord op die bord.
2. Select the correct playback speed (33 1/3 or 45 RPM).
3. Lig die toonarm op met behulp van die stoothefboom.
4. Carefully position the stylus over the lead-in groove of the record.
5. Lower the tonearm gently using the cueing lever. The stylus will descend onto the record and begin playback.

Figuur 3.1: Bo-na-onder view of the turntable during record playback. The tonearm is positioned over the record.

3.3 Stop van Terugspeel

1. Lig die toonarm op met behulp van die stoothefboom.
2. Return the tonearm to its rest and secure it with the tonearm clip.
3. Turn off the turntable by pressing the power button.

4. Onderhoud

Regular maintenance ensures the longevity and optimal performance of your turntable.

4.1 Skoonmaak van die draaitafel

• Stofbedekking: Maak die stofkap skoon met 'n sagte, damp lap. Vermy skuur skoonmakers.
• Voetstuk en Skottel: Use a soft, lint-free cloth to wipe the plinth and platter. For stubborn marks, a slightly damp lap kan gebruik word, gevolg deur 'n droë een.
• Stylus: Use a dedicated stylus cleaning brush or fluid to gently clean the stylus. Always brush from back to front.

4.2 Gordelvervanging

The drive belt may stretch or degrade over time. If you notice inconsistent speed or reduced performance, the belt may need replacement. Contact Pro-Ject support or an authorized dealer for a replacement belt.

5. Probleemoplossing

This section addresses common issues you might encounter with your turntable.

6. Spesifikasies

Key technical specifications for the Pro-Ject Debut EVO 2 Turntable.

• Model: Debuut EVO 2
• Item Modelnommer: 9120129864978
• Handelsmerk: Pro-Ject
• Produk afmetings: 16.4 x 12.6 x 4.5 duim (41.66 x 32.00 x 11.43 cm)
• Item gewig: 13.2 pond (6 kg)
• Skottelmateriaal: Damped Aluminum (1.7kg, anti-magnetic)
• Tonarm: Koolstofvesel
• Patroon: Pick it MM EVO (pre-mounted)
• Spoed: 33 1/3, 45 RPM (78 RPM with optional belt/stylus)
• Verbindingstegnologie: Auxiliary (RCA outputs)
• Ingesluit komponente: Turntable, transparent dustcover, connection cable, power adapter, alignment protractor, single adapter.
• Spesiale kenmerke: Carbon Fiber Tonearm, Damped Aluminum Platter, High-Quality Cartridge, Electronic Speed Selection, 25-Year Spare Parts Guarantee.

7. Waarborginligting

Pro-Ject Audio Systems offers a 25-year spare parts availability guarantee for this turntable, ensuring long-term support for your product. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Pro-Ject webwebwerf.

Beskermingsplanne is ook beskikbaar vir aankoop:

• 2-jaar beskermingsplan
• 3-jaar beskermingsplan
• Volledige Beskerming (maandelikse plan)

8. Ondersteuning en Kontak

For technical assistance, troubleshooting beyond this manual, or spare parts inquiries, please contact your authorized Pro-Ject dealer or visit the official Pro-Ject Audio Systems webwebwerf vir ondersteuningsbronne.

U kan ook die Pro-Ject Winkel op Amazon vir bykomende produkinligting en bykomstighede.