GODIYMODULES Tube Preamp Switch Power Supply User Manual

1. Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of the GODIYMODULES Tube Preamp Switch Power Supply. This power supply is designed for use with tube preamphefers en klep amplifiers, offering stable and clean power output.

Key features include an all-aluminum alloy shell with a stainless steel shield for electromagnetic interference reduction, a 5V Bluetooth decoder board power interface, and high-voltage delay synchronous rectification to minimize current impact on tubes.

2. Veiligheidsmaatreëls

Volg altyd die volgende veiligheidsmaatreëls om beserings of skade aan die toestel te voorkom:

• Ensure the power supply is disconnected from the main power source before making any connections or adjustments.
• Moenie die eenheid aan vog of uiterste temperature blootstel nie.
• Gebruik slegs die gespesifiseerde invoer voltage reeks (95V-265V).
• Handle with care, especially when working with high voltage komponente.
• Installation should be performed by individuals familiar with electronic circuits and safety practices.

3. Produk verbyview

The GODIYMODULES Tube Preamp Switch Power Supply is a compact and robust power solution for audio applications. It features a shielded design and multiple output voltages.

3.1. Komponente en kenmerke

• All-aluminum alloy shell and stainless steel shield: Provides excellent electromagnetic interference (EMI) shielding.
• 5V Bluetooth decoder board power interface: Convenient for integrating additional audio components.
• Hoogvoltage delay synchronous rectification: Reduces current impact during startup, protecting vacuum tubes. The delay is approximately 30 seconds and can be adjusted.
• Selectable High Voltage Uitset: User can select between 250V or 280V output.
• Filament Output: Provides 6.3V for tube filaments.

3.2. Pakketinhoud

Die pakket sluit in:

• 1 x Tube Preamp Switch Power Supply Module

4. Spesifikasies

5. Opstelling en installering

Follow these steps for proper installation of the power supply module into your audio system. It is recommended to have experience with electronics for this process.

5.1. Identifying Connections

Figure 5.1: Connection Diagram of the Power Supply Module.

This image illustrates the various connection points on the power supply module. Key labels include "Power input 110-220V" for AC input, "Lamp is filament 6.3V" for the filament supply, and "Output 250V or 280V" for the high voltage DC output. Ground (GND) connections are also clearly marked.

• Power Input (110-220V): Connect your AC mains power here. This module supports a wide input range from 95V to 265V.
• Filament Output (6.3V): Connect this to the filament pins of your vacuum tubes.
• Hoog Voltage Uitset (250V/280V): Connect this to the anode (plate) supply of your vacuum tubes.
• GND: Common ground connections for all outputs.
• 5V uitset: A dedicated 5V output is available for powering a Bluetooth decoder board or similar low-power accessories.

5.2. Hoë Voltage Uitsetkeuse

The module allows selection between 250V and 280V for the high voltage output. This is typically done via a jumper or switch on the board. Refer to the diagram (Figure 5.1) for the exact location of the selection jumper.

• To select 250V output, position the jumper accordingly.
• To select 280V output, position the jumper accordingly.

Belangrik: Ensure the power supply is completely disconnected from the mains before changing the high voltage output selection.

5.3. Montering

The module features mounting holes for secure installation within an enclosure. Use appropriate screws and standoffs to prevent short circuits and ensure proper ventilation.

Figuur 5.2: Hoekig view van die kragtoevoermodule.

This image provides an angled perspective of the power supply module, highlighting its robust all-aluminum alloy shell and stainless steel shield. The mounting tabs with pre-drilled holes are visible, indicating how the unit can be securely fastened within an amplifier chassis or enclosure.

Figuur 5.3: Voorkant view van die kragtoevoermodule.

This image shows a direct front view of the power supply module, emphasizing the perforated metal shield that covers the internal components. The green terminal blocks for connections are visible on the sides.

Figuur 5.4: Alternatiewe hoek view van die kragtoevoermodule.

This image offers another angled view of the power supply module, similar to Figure 5.2, further illustrating the compact design and the protective metal casing.

Figure 5.5: Internal components of the power supply module.

Hierdie beeld bied 'n bo-na-onder view of the power supply module with its shield removed, revealing the internal circuit board, transformer, capacitors, and other electronic components. This view is useful for understanding the layout and identifying specific parts.

Figuur 5.6: Onder view van die kragtoevoermodule.

This image displays the bottom side of the power supply module, showing the solid metal base and additional mounting points. This view confirms the robust construction and provides insight into how the unit can be mounted from below.

6. Bedryfsinstruksies

Once the power supply is correctly installed and connected to your tube amplifier circuit, operation is straightforward.

1. Verifieer verbindings: Double-check all wiring connections to ensure they are secure and correct according to the setup instructions.
2. Pas krag toe: Connect the AC input to a suitable power outlet (95V-265V).
3. Observe Delay: Die hoë voltage output will engage after a delay of approximately 30 seconds. This delay allows the tube filaments to warm up, protecting the tubes from sudden high voltage stres.
4. Monitor prestasie: After the delay, the amplifier should power on and operate normally. Listen for any unusual noises or signs of malfunction.

The power supply is designed for continuous operation within its specified parameters.

7. Onderhoud

The GODIYMODULES Tube Preamp Switch Power Supply is designed for long-term reliability with minimal maintenance. However, periodic checks can help ensure optimal performance and longevity.

• Skoonmaak: Ensure the module is kept clean and free of dust. Disconnect power before cleaning. Use a soft, dry cloth. Do not use liquid cleaners.
• Ventilasie: Ensure adequate airflow around the module, especially if it is enclosed. Overheating can reduce component lifespan.
• Verbindingskontroles: Periodically inspect all wiring connections for tightness and signs of corrosion. Loose connections can lead to intermittent operation or damage.
• Visuele inspeksie: Look for any signs of physical damage, bulging capacitors, or discoloration on the circuit board, which may indicate a problem.

Let wel: Do not attempt to repair the module yourself if you are not qualified. Contact professional service if issues arise.

8. Probleemoplossing

This section provides solutions to common issues you might encounter with the power supply module.

Indien u probleme ondervind wat nie hier gelys word nie, of indien die voorgestelde oplossings nie die probleem oplos nie, kontak asseblief kliëntediens.

9. Waarborg en Ondersteuning

For warranty information and technical support, please refer to the seller's policy on the platform where the product was purchased. Keep your purchase receipt as proof of purchase.

Manufacturer: GODIYMODULES

ASIN: B0D9VCYBLB