aigo AF12 3-in-1 ARGB Fan Kit Instruction Manual

Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of your aigo AF12 3-in-1 ARGB Fan Kit. Please read this manual thoroughly before use to ensure proper functionality and longevity of the product.

Produk Kenmerke

The aigo AF12 3-in-1 ARGB Fan Kit offers efficient cooling and customizable lighting for your computer system. Key features include:

• Model: AF123IN1-BK
• Fan Hoeveelheid: 3 x 120mm fans
• Fan Spoed: 800-2000 opm (±10%)
• Fan Noise Level: ≤30dBA
• Lugvloei: 86.6 CFM
• Statiese druk: 1.27mm-H²O
• Working Current (Motor): ≤0.2A (12V)
• Working Current (Light): ≤0.48A (5V)
• Afmetings: 120 x 120 x 25 mm
• ARGB-beligting: Addressable RGB lighting for customizable effects.

Pakketinhoud

Verifieer dat al die items wat hieronder gelys word, in u pakket teenwoordig is:

• 3 x aigo AF12 ARGB Fans
• Monteer skroewe
• ARGB Controller (if included in kit)
• Cables (Power, ARGB Sync)

Installasiegids

Follow these steps to properly install your aigo AF12 ARGB fans into your computer case.

1. Berei jou stelsel voor: Power off your computer and disconnect it from the power source. Open your computer case.
2. Identifiseer monteringsplekke: Determine the desired locations for your fans (e.g., front, top, rear, bottom of the case). Ensure proper airflow direction.
3. Monteer die waaiers: Position each fan in its chosen location. Use the provided mounting screws to secure the fans to the case. Ensure the fan blades are not obstructed.
   

   Image: An aigo AF12 fan viewed from an angle, highlighting the mounting points on its corners. This illustrates how the fan is secured.
4. Koppel kragkabels: Connect the 3-pin power connector from each fan to an available fan header on your motherboard or fan controller.
5. Verbind ARGB-kabels: Connect the ARGB cable from each fan to the ARGB controller (if applicable) or directly to a compatible 5V 3-pin ARGB header on your motherboard. Ensure correct pin orientation to avoid damage.
   

   Beeld: 'n Syprofile of the aigo AF12 fan, illustrating the thickness and potential locations for cable connections on the frame.

6. Kabelbestuur: Route cables neatly to prevent interference with other components and to improve airflow.
7. Maak die kas toe en skakel aan: Close your computer case, reconnect the power, and power on your system.

Bedryfsinstruksies

Once installed, your aigo AF12 ARGB fans will operate automatically based on your system's fan control settings. The ARGB lighting can be controlled via your motherboard's software or a dedicated ARGB controller.

Waaierspoedbeheer

Fan speed can typically be adjusted through your motherboard's BIOS/UEFI settings or through fan control software provided by your motherboard manufacturer. Refer to your motherboard manual for specific instructions.

ARGB Beligtingsbeheer

If connected to a 5V 3-pin ARGB header on your motherboard, use your motherboard's ARGB synchronization software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, GIGABYTE RGB Fusion, ASRock Polychrome Sync) to customize lighting effects, colors, and patterns.

If using a dedicated ARGB controller (often included with fan kits), refer to the controller's specific instructions for lighting adjustments.

Onderhoud

Gereelde onderhoud verseker optimale werkverrigting en verleng die lewensduur van jou waaiers.

• Stof skoonmaak: Periodically clean dust from the fan blades and housing using compressed air or a soft brush. Ensure the system is powered off before cleaning.
• Kabelkontrole: Verify that all cables are securely connected and free from damage.
• Geraasmonitering: Listen for unusual noises, which may indicate a fan bearing issue or obstruction.

Probleemoplossing

If you encounter issues with your aigo AF12 ARGB fans, refer to the following common solutions:

Waaiers draai nie

• Gaan kragverbinding na: Ensure the fan's 3-pin power connector is securely plugged into the motherboard or controller.
• Gaan BIOS-instellings na: Verify that fan headers are enabled in your motherboard's BIOS/UEFI settings.
• Test Another Header: Try connecting the fan to a different fan header to rule out a faulty header.

ARGB Lights Not Working

• Kontroleer ARGB-verbinding: Ensure the 5V 3-pin ARGB connector is correctly and securely plugged into the motherboard or controller. Verify the pin orientation.
• Kontroleer sagteware: Confirm that your motherboard's ARGB software is installed and configured correctly.
• Verenigbaarheid: Ensure your motherboard has a compatible 5V 3-pin ARGB header. This product is not compatible with 12V 4-pin RGB headers.

Oormatige geraas

• Kyk vir obstruksies: Maak seker dat geen kabels of ander komponente aan die waaierblaaie raak nie.
• Bevestigingsskroewe: Verify that all mounting screws are tightened to prevent vibrations.
• Stofopbou: Clean any dust from the fan blades.

Tegniese spesifikasies

Waarborg en Ondersteuning

This aigo product comes with a 12 maande waarborg vanaf die aankoopdatum, wat vervaardigingsfoute dek.

For technical support, warranty claims, or further assistance, please visit the official aigo store or contact their customer service through the details provided on their webwebwerf.

Official aigo Store: aigo Store on Amazon