CREWORKS 22kg/24h Ice Maker Instruction Manual

Inleiding

Thank you for choosing the CREWORKS 22kg/24h Ice Maker. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read it thoroughly before use and retain it for future reference.

Image: The CREWORKS 22kg/24h Ice Maker, a sleek stainless steel unit with a clear lid, producing ice cubes on a kitchen countertop.

Veiligheidsinstruksies

Om veilige werking te verseker, volg altyd hierdie basiese voorsorgmaatreëls:

• Lees alle instruksies voordat u die toestel gebruik.
• Moenie enige toestel gebruik met 'n beskadigde koord of prop, of nadat die toestel wanfunksioneer of op enige manier beskadig is nie.
• Moenie die kragkabel, prop of enige deel van die toestel in water of ander vloeistowwe dompel nie.
• Hou die toestel weg van hittebronne en direkte sonlig.
• Maak seker dat die toestel op 'n stabiele, gelyk oppervlak geplaas word.
• Hierdie toestel is slegs vir huishoudelike gebruik.
• Ontkoppel die toestel voordat u skoonmaak of enige onderhoud uitvoer.

Produkkomponente

The CREWORKS Ice Maker comes with the following components:

• Ysmaker-eenheid
• Ysmandjie
• Yslepel
• Gebruikershandleiding

Image: The CREWORKS Ice Maker shown with its included ice scoop and removable ice basket, ready for use.

Opstelling

1. Uitpak: Haal die ysmasjien versigtig uit sy verpakking. Verwyder alle verpakkingsmateriaal, insluitend enige kleefband of beskermende film.
2. Plasing: Place the ice maker on a flat, stable, and heat-resistant surface. Ensure there is adequate ventilation around the unit (at least 10 cm clearance on all sides). Avoid placing it near heat sources or in direct sunlight.
3. Aanvanklike skoonmaak: Maak die binnekant van die ysmasjien skoon voor die eerste gebruik. Verwys na die afdeling "Onderhoud en Skoonmaak" vir gedetailleerde instruksies.
4. Kragverbinding: Verseker die voltage specified on the appliance matches your local power supply. Plug the power cord into a grounded electrical outlet.
5. Watervoorsiening:
   • Handmatige Vul: Open the top lid and fill the water reservoir with potable water up to the "MAX" fill line. Do not overfill.
   • Automatic Water Supply (if applicable): For models with direct water connection, connect the water inlet hose to a cold water tap and the ice maker. Ensure all connections are secure to prevent leaks.

Image: Diagram illustrating two water supply methods: manual filling of the reservoir and direct connection to a cold water tap with a filter.

Bedryfsinstruksies

Beheerpaneel oorview

Beeld: 'n Gedetailleerde view of the ice maker's LCD control panel, showing buttons for power, timer/clean, and ice thickness adjustment, along with status indicators.

The intuitive LCD control panel allows for easy operation:

• AAN/UIT-knoppie: Skakel die eenheid aan of af.
• TIMER/SKOONMAAK-knoppie: Initiates the self-cleaning cycle or sets a timer for operation.
• +/- Knoppies: Adjust ice making time to customize ice cube thickness.
• Aanwysers: Display status such as "Ice Making in Progress," "Self-Cleaning in Progress," "Ice Basket Full," and "Low Water Level."

Ys maak

1. Krag aan: Druk die AAN/AF button to start the ice maker.
2. Select Ice Size (Optional): Gebruik die +/- buttons to adjust the ice making cycle time. A longer cycle results in thicker ice cubes.
3. Ysproduksie: The unit will automatically begin the ice making process. The "Ice Making in Progress" indicator will illuminate. The first batch of ice cubes will be ready in approximately 11-20 minutes.
4. Ysversameling: Once ice is produced, it will drop into the ice basket. When the ice basket is full, the "Ice Basket Full" indicator will light up, and the machine will pause production. Remove ice to resume.
5. Lae water: If the water level is too low, the "Low Water Level" indicator will light up, and the machine will stop. Refill the water reservoir to continue.

Image: A visual guide showing three steps: 1. Opening the top reservoir and filling with water. 2. Pressing the ON/OFF button to start ice production. 3. Opening the lid and removing the ice basket filled with ice.

Onderhoud en Skoonmaak

Gereelde skoonmaak en onderhoud verseker optimale prestasie en higiëne.

Selfreinigende funksie

1. Maak seker dat die waterreservoir met skoon water gevul is.
2. Druk en hou die TIMER/SKOON button for a few seconds to activate the self-cleaning mode. The "Self-Cleaning in Progress" indicator will light up.
3. The cleaning cycle will run automatically. Once complete, drain the water from the unit.

Image: The ice maker illustrating its self-cleaning mode, with an emphasis on the drain plug located at the bottom for easy water removal.

Handmatige skoonmaak

1. Ontkoppel: Ontkoppel altyd die ysmasjien van die kragtoevoer voordat u dit skoonmaak.
2. Dreineer water: Remove the drain plug at the bottom of the unit to empty any remaining water from the reservoir.
3. Skoon binnekant: Gebruik 'n sagte lap dampened with a mild detergent solution to wipe the interior surfaces, including the ice basket and water reservoir. Rinse thoroughly with clean water.
4. Skoon buitekant: Vee die buitekant af met 'n sagte, damp lap. Moenie skuur skoonmaakmiddels of oplosmiddels gebruik nie.
5. Droog: Ensure all parts are completely dry before reassembling and storing or using the appliance.

Probleemoplossing

Spesifikasies

Image: A diagram showing the precise dimensions of the CREWORKS Ice Maker and its ice basket.

Waarborg en Ondersteuning

For warranty information and customer support, please refer to the documentation included with your purchase or visit the official CREWORKS website. Please have your model number (22CIM) and purchase date available when contacting support.

Let wel: Inligting oor die beskikbaarheid van onderdele word nie in die produkbesonderhede verskaf nie.