TOOQ DB1202TN-B Dual Monitor Desk Mount with Laptop Tray Instruction Manual

1. Inleiding

This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your TOOQ DB1202TN-B Dual Monitor Desk Mount with Laptop Tray. Please read this manual thoroughly before installation and use to ensure proper setup and safe operation. Keep this manual for future reference.

Figure 1: TOOQ DB1202TN-B Dual Monitor Desk Mount with Laptop Tray in use.

2. Veiligheidsinligting

• Lees alle instruksies: Ensure you understand all instructions and warnings before installation and use.
• Gewig kapasiteit: Do not exceed the maximum weight capacity of 9 kg (19.8 lbs) per monitor arm and 9 kg (19.8 lbs) for the laptop tray. Exceeding this limit may result in serious injury or property damage.
• Monitor grootte: Hierdie montering is ontwerp vir monitors tussen 17 en 32 duim.
• Laptop Size: The tray is suitable for laptops between 12 and 17 inches.
• VESA-versoenbaarheid: Ensure your monitors are VESA compatible (75x75mm or 100x100mm).
• lessenaar dikte: Verify your desk thickness is within the specified range for clamp of grommet installasie.
• Vergadering: Assemble the product according to the instructions. Incorrect assembly can lead to product failure or injury.
• Kinders: Hou klein dele weg van kinders.
• Onderhoud: Regularly check that the mount is secure and all fasteners are tight.

3. Pakketinhoud

Please verify that all components are present and undamaged before proceeding with installation. If any parts are missing or damaged, contact customer support.

• 1x Main Pole
• 2x Monitor Arms
• 1x Laptop Tray
• 1x Desk Clamp Vergadering
• 1x Grommet Mount Assembly
• 1x Hardware Kit (screws, washers, Allen keys)
• 1x handleiding

Figure 2: Included mounting hardware (M-A: M4x12, M-B: M5x12, M-C: D5 washers).

4. Spesifikasies

Figure 3: Detailed technical drawing with dimensions.

5. Opstelling en installering

The TOOQ DB1202TN-B offers two installation options: desk clamp of buisbevestiging. Kies die metode wat die beste by jou lessenaar pas.

5.1 lessenaar Clamp Installasie

1. Heg die lessenaar clamp base to the main pole using the provided screws.
2. Plaas die clamp on the edge of your desk. Ensure the desk thickness is compatible with the clamp's range.
3. Draai die clamp screw until the mount is securely fastened to the desk. Do not overtighten.

Figuur 4: Lessenaarafwerkingamp installasie.

5.2 Installasie van die buisbevestiging

1. If your desk has a grommet hole, remove the existing grommet cover.
2. Assemble the grommet base components as per the diagram in the manual (not provided here, but implied).
3. Steek die hoofpaal deur die opening van die buis.
4. Secure the grommet base from underneath the desk using the provided plate and nut. Tighten firmly.

Figure 5: Grommet mount installation.

5.3 Attaching Monitor Arms and Laptop Tray

1. Slide the monitor arms onto the main pole at your desired height. Secure them with the locking collars.
2. Slide the laptop tray arm onto the main pole and secure it.
3. Attach the VESA plates to the back of your monitors using the appropriate M4x12 or M5x12 screws and D5 washers from the hardware kit. Ensure the screws are not overtightened and do not damage the monitor.
4. Carefully slide the monitors (with VESA plates attached) onto the monitor arms. Ensure they click into place securely.
5. Place your laptop onto the laptop tray. Adjust the width-adjustable claws to securely hold your laptop.

Figure 6: Attaching monitor arms and adjusting height.

Figure 7: Laptop holder with adjustable width claws (276-472mm).

6. Operating Instructions and Adjustments

This monitor mount offers various adjustment options to achieve an ergonomic setup.

• Hoogte verstelling: Loosen the locking collar on the main pole to slide the monitor arms and laptop tray up or down. Retighten the collar once the desired height is reached.
• Kantelverstelling: The monitor and laptop tray can be tilted +45° to -45°. Use the provided Allen key to adjust the tension if the screen does not hold its position.
• Swivel verstelling: Swivel your monitors up to 90° horizontally or vertically.
• Rotasie aanpassing: Rotate your monitors +180° to -180° for portrait or landscape orientation.
• Laptop Tray Tilt: The laptop tray also offers tilt adjustment for comfortable typing and viewhoeke.

Figure 8: Laptop tray tilt adjustment.

Figure 9: Monitor swivel and rotation capabilities.

6.1 Kabelbestuur

Utilize the integrated cable clips along the arms and main pole to route and organize your monitor and laptop cables. This helps maintain a clean and tidy workspace.

Figure 10: Cable management clips.

7. Onderhoud

• Skoonmaak: Vee die monteerstuk af met 'n sagte, damp lap. Vermy skuurmiddels of oplosmiddels.
• Dichtheidskontrole: Periodically check all screws and fasteners to ensure they remain tight and secure. Retighten as necessary.
• Smering: No lubrication is required for normal operation.

8. Probleemoplossing

• Monitor sags or does not hold position:
  • Ensure the monitor weight does not exceed the maximum capacity (9 kg per arm).
  • Tighten the tilt adjustment screw on the VESA plate using the provided Allen key.
• Montering is onstabiel:
  • Verify the desk clamp or grommet mount is securely tightened to the desk.
  • Ensure the main pole and arm collars are tightened.
• Laptop tray sags:
  • Ensure the laptop weight does not exceed the maximum capacity (9 kg).
  • Tighten the tilt adjustment screw for the laptop tray.
• Ontbrekende dele:
  • Refer to the "Package Contents" section. If parts are missing, contact customer support.

9. Waarborg en Ondersteuning

For warranty information or technical support, please refer to the documentation included with your purchase or visit the official TOOQ webwebwerf. Bewaar u aankoopbewys as bewys van aankoop.