Produk verbyview
The WALI GSMU001XL is a heavy-duty single monitor gas spring desk mount designed to support ultrawide or curved LCD/LED screens ranging from 17 inches to 49 inches. It can hold monitors weighing up to 44 lbs and is compatible with VESA mounting patterns of 75x75mm and 100x100mm. This mount offers full adjustability for optimal viewing angles and includes integrated USB Type-C and USB Type-A 3.0 ports for convenient connectivity.
The mount features a two-stage locking system, supporting both C-clamp and Grommet Base installations on desks with a thickness between 0.47 inches and 1.97 inches.
Pakketinhoud
Before beginning installation, please ensure all components are present and undamaged. If any parts are missing or damaged, contact WALI customer support.
- 1 x WALI Ultrawide Monitor Desk Mount (GSMU001XL)
- Mounting Hardware Kit (screws, washers, spacers, Allen wrenches)
- Gebruikershandleiding
Opstelling en installasie
Follow these steps carefully to install your WALI GSMU001XL monitor mount. Two installation methods are available: C-clamp and Grommet Base.
Step 1: Choose Mounting Method
Determine whether to use the C-clamp or Grommet Base. Both methods are compatible with desk thicknesses from 0.47 inches to 1.97 inches.
Step 2: Assemble the Base and Arm
Assemble the base according to your chosen mounting method (C-clamp or Grommet Base). Attach the lower arm section to the base.
Stap 3: Heg die VESA-plaat aan die monitor vas
Attach the VESA plate to the back of your monitor using the appropriate screws from the hardware kit. Ensure the screws are tightened securely but do not overtighten.
Step 4: Mount Monitor to Arm
Carefully slide the monitor (with the attached VESA plate) onto the upper arm section. Ensure it locks into place. It is recommended to have assistance when mounting heavier monitors.
Step 5: Connect USB Cables
Connect the integrated USB Type-C and USB Type-A 3.0 ports on the mount to your computer using the provided cables. Route cables through the arm's cable management channels for a tidy setup.
Bediening van die monitorarm
The WALI GSMU001XL monitor arm offers extensive adjustability to achieve an ergonomic viewing posisie.
Adjusting Monitor Position
The arm allows for the following movements:
- Kantel: Adjust the monitor angle from +50° to -20°.
- Draai: Rotate the monitor horizontally up to +90°/-90°.
- Rotasie: Rotate the monitor 360° to switch between landscape and portrait modes.
- Hoogte verstelling: The gas spring arm allows for a height range of 9.09 inches to 19.69 inches.
- Uitbreiding: The arm can extend up to 21.93 inches.
Aanpassing van gasveer spanning
The gas spring tension must be adjusted to match your monitor's weight for proper balance and movement. Use the provided Allen wrench to adjust the tension screw located on the arm.
- To adjust for lighter monitors or if the monitor floats up: Turn the tension screw kloksgewys.
- To adjust for heavier monitors or if the monitor sags down: Turn the tension screw anti-kloksgewys.
Adjust gradually until the monitor stays in position when released.
Onderhoud
To ensure the longevity and proper function of your WALI monitor arm, follow these simple maintenance guidelines:
- Skoonmaak: Vee die arm en basis af met 'n sagte, damp lap. Vermy skuurmiddels of oplosmiddels wat die afwerking kan beskadig.
- Periodieke ondersoeke: Kontroleer gereeld alle skroewe en verbindings om te verseker dat hulle styf bly. Draai weer vas indien nodig.
- Gasveer: The gas spring is designed for long-term use and typically requires no maintenance. If you notice changes in its performance, refer to the troubleshooting section.
Probleemoplossing
Indien u probleme met u monitorarm ondervind, raadpleeg die volgende algemene probleme en oplossings:
Problem: Monitor Sags or Drops
Oplossing: The gas spring tension is likely too low for your monitor's weight. Turn the tension screw anti-kloksgewys to increase tension until the monitor holds its position.
Problem: Monitor Floats Up or is Difficult to Push Down
Oplossing: The gas spring tension is likely too high for your monitor's weight. Turn the tension screw kloksgewys to decrease tension until the monitor holds its position.
Problem: Monitor is Unstable or Wobbles
Oplossing:
- Ensure all mounting screws (desk clamp/grommet, VESA plate, arm connections) are securely tightened.
- Verify that your desk is stable and can support the weight of the mount and monitor.
Problem: USB Ports Not Functioning
Oplossing:
- Ensure the USB cables from the monitor arm are properly connected to your computer's USB ports.
- Test with different USB devices or computer ports to rule out device or port issues.
If problems persist after attempting these solutions, please contact WALI customer support.
Spesifikasies
| Kenmerk | Spesifikasie |
|---|---|
| Modelnommer | GSMU001XL |
| Handelsmerk | WALI |
| Verenigbaarheid van monitorgroottes | 17" to 49" Ultrawide/Curved |
| Gewig kapasiteit | Tot 44 kg (20 lbs) |
| VESA-versoenbaarheid | 75x75mm, 100x100mm |
| Lessenaar Dikte Verenigbaarheid | 0.47" - 1.97" (1.2 cm - 5 cm) |
| Montage tipe | C-klamp, Grommet Base |
| Kantelhoek | +50° / -20° |
| Draaihoek | +90° / -90° |
| Rotasie | 360° (Landscape to Portrait) |
| Hoogtereeks | 9.09" - 19.69" (23.1 cm - 50 cm) |
| Maksimum Arm Uitbreiding | 21.93" (55.7 cm) |
| Geïntegreerde poorte | 1 x USB Type-C, 1 x USB Type-A 3.0 |
| Materiaal | Aluminium |
| Kleur | Swart |
Produk video
Waarborg en Ondersteuning
For warranty information or technical assistance, please contact WALI customer support. WALI provides experienced and friendly US-based customer support available to assist 7 days a week.
Refer to the product packaging or the official WALI webwebwerf vir die mees onlangse kontakbesonderhede en waarborgvoorwaardes.