BIOWAVE BioWrap Back Brace S/M

BIOWAVE BioWrap Back Brace Lumbar Support User Manual

Model: S/M (Waist Size 28”-38”)

Inleiding

This manual provides instructions for the proper use and care of your BIOWAVE BioWrap Back Brace Lumbar Support. This device is designed to provide lumbar support and facilitate the integration of a BioWaveGO TENS unit for muscle stimulation and pain relief. Please read this manual thoroughly before initial use.

Diagram showing human anatomy with highlighted areas for pain relief, including hip, groin, pelvic floor, menstrual, sciatica, rib, mid torso, low back, and SI joint.

Image illustrating common areas of back pain and related discomfort where the BioWrap may be applied.

Veiligheidsinligting

Belangrik: The BioWrap Back Brace is intended for use with the BioWaveGO TENS Unit (sold separately). Do not use this product without consulting a healthcare professional if you have pre-existing medical conditions, are pregnant, or have implanted electronic devices.

  • Ensure electrodes are properly attached and skin is clean before use.
  • Do not apply electrodes over open wounds, rashes, or irritated skin.
  • Hou buite bereik van kinders.
  • Discontinue use if irritation or discomfort occurs.

Pakketinhoud

Verifieer dat alle items in jou pakket teenwoordig is:

  • 1 x BIOWAVE BioWrap Back Brace (S/M)
  • 4 x Electrode Pads (for use with BioWaveGO)

Let wel: The BioWaveGO TENS Unit is required for electrical stimulation and is sold separately.

Contents of the BIOWAVE BioWrap package, showing the back brace, four electrode pads, and a BioWaveGO device (marked as not included).

Image showing the BioWrap Back Brace, electrode pads, and the BioWaveGO device (indicated as a separate purchase).

Produkspesifikasies

KenmerkDetail
HandelsmerkBIOWAVE
ModelBioWrap Back Brace
GrootteS/M (For Waist Size 28”-38”)
Material (Inside)Neopreen
Material (Outside)Tricote
VerenigbaarheidBioWaveGO TENS Unit
Spesifieke gebruikeLumbar Support, Sciatica, Back Pain Relief

Opstelling en toepassing

Follow these steps to properly set up and apply your BioWrap Back Brace with the BioWaveGO TENS Unit.

  1. Prepare Electrodes: Place the Velcro-backed side of each electrode pad directly onto the designated areas on the inside of the BioWrap. Ensure a secure attachment.
  2. Connect Leadwires: Plug the blue pad connectors into the blue leadwire cable connectors from your BioWaveGO device.
  3. Plaas die stut: Wrap the BioWrap around your lower back, ensuring it is centered and comfortable. Pull tight to achieve a snug fit.
  4. Beveilig die stut: Attach the main Velcro closure over the left side. Unhook any secondary straps and pull them down to further tighten the BioWrap for optimal compression and electrode contact.
  5. Connect to BioWaveGO: Plug the single end of the cable into your BioWaveGO device.
  6. Power On and Adjust: Power on your BioWaveGO device. Press the '+' button to increase intensity and control your comfort level.
Step-by-step instructions for using the BIOWAVE BioWrap Back Brace with the BioWaveGO TENS unit, showing electrode placement, cable connection, and brace application.

Visual guide for applying electrodes, connecting the BioWaveGO, and wearing the BioWrap brace.

Bedryfsinstruksies

Once the BioWrap Back Brace is properly applied and connected to the BioWaveGO TENS Unit, you can begin your therapy session.

  • Begin 'n sessie: Refer to your BioWaveGO TENS Unit manual for specific instructions on initiating a therapy session. Typically, a session lasts 30 minutes.
  • Aanpassing van intensiteit: Use the controls on your BioWaveGO device to adjust the intensity of the electrical stimulation to a comfortable yet effective level.
  • Monitoring Comfort: The sensation should be a deep, soothing massage, not painful. If you experience any discomfort, reduce the intensity or discontinue use.
  • Wearable Use: The BioWrap is designed for mobility. You can wear it during light activities.
A person wearing the BIOWAVE BioWrap Back Brace while walking a dog outdoors, demonstrating its wearable design and allowing for mobility during use.

The BioWrap Back Brace allows for mobility during use.

Onderhoud en versorging

  • Cleaning the Brace: Hand wash the BioWrap Back Brace with mild soap and cold water. Air dry completely. Do not machine wash, tumble dry, bleach, or iron.
  • Elektrodeversorging: Replace electrode pads when they lose their adhesiveness or if you notice reduced effectiveness. Always apply electrodes to clean, dry skin.
  • Berging: Store the BioWrap and electrodes in a cool, dry place away from direct sunlight.

Probleemoplossing

ProbleemMoontlike oorsaakOplossing
Geen sensasie of swak sensasieElectrodes not making good contact; Electrodes worn out; BioWaveGO device not powered on or faulty connection.Re-position electrodes, ensure skin is clean; Replace electrodes; Check BioWaveGO power and cable connections.
VelirritasieElectrodes applied to irritated skin; Allergic reaction; Overuse.Discontinue use immediately; Consult a healthcare professional; Ensure skin is clean and dry before application.
Brace feels too loose or too tightIncorrect sizing or improper application.Adjust Velcro straps for a snug, comfortable fit. Ensure correct size was purchased (S/M for 28”-38” waist).

Waarborg en Ondersteuning

For information regarding warranty coverage for your BIOWAVE BioWrap Back Brace, please refer to the documentation included with your purchase or visit the official BIOWAVE webwebwerf.

For customer support, technical assistance, or to purchase replacement parts, please contact BIOWAVE directly through their official channels.

BIOWAVE BioWrap Back Brace User Manual. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.