Solity GT10BK Smart Digital Door Lock User Manual

1. Inleiding

This manual provides detailed instructions for the installation, setup, operation, and maintenance of your Solity GT10BK Smart Digital Door Lock. Please read this manual thoroughly before installation and use to ensure proper function and safety. The Solity GT10BK offers multiple access methods including fingerprint, PIN codes, app control, one-time codes, and traditional keys, designed for convenient and secure entry.

Figure 1: Solity GT10BK Smart Digital Door Lock with its exterior, interior, and mobile application interface.

2. Veiligheidsinligting

• Lees alle instruksies voordat u die produk installeer en gebruik.
• Moenie probeer om die slot uitmekaar te haal of te wysig nie. Dit kan skade veroorsaak en die waarborg ongeldig maak.
• Use only specified batteries (Alkaline AA). Do not mix old and new batteries or different types of batteries.
• Keep traditional keys in a safe, accessible location outside the property for emergency backup.
• Change the default administrator PIN code immediately after installation.
• Ensure proper cable routing during installation to prevent pinching or damage.

3. Produk verbyview

3.1. Komponente

The Solity GT10BK Smart Digital Door Lock package includes the following components:

• Exterior Body (with touchscreen keypad and fingerprint sensor)
• Interior Body (with thumbturn and battery compartment)
• Montageplaat
• grendel
• Stakplaat
• Stofboks
• Skroewe (verskillende groottes vir installasie)
• AA Batteries (not included, 4 required)
• Traditional Keys (2 provided)
• Herstel pen
• Boor sjabloon
• Paper Manual
• Magnet Bracket Sensor (for auto-lock feature)

3.2. Sleutel kenmerke

• 5-in-1 Keyless Entry: Fingerprint, PIN codes, app control, one-time codes, and traditional keys.
• Vinnige vingerafdrukherkenning: Grants access in approximately 0.3 seconds.
• Outo-sluit sekuriteit: Adjustable auto-lock feature from 5 to 180 seconds.
• Seamless Smart Home Integration: Compatible with Amazon Alexa and SmartThings, no additional hub required.
• Remote App Management: Control and monitor your lock remotely via the dedicated app.
• Duursame ontwerp: IP54 certified for dust and water resistance, tested for extreme temperatures and force.
• Multilingual Voice Assistance: Supports English, Spanish, and French.

4. Installasie

The Solity GT10BK is designed for easy installation on standard American doors, suitable for both left and right-handed orientations. Refer to the installation video and the provided drilling template for precise measurements.

4.1. Verenigbaarheidstoets

Before starting installation, ensure your door meets the following specifications:

• Deur dikte: 1-3/8" to 2" (35-50mm)
• Door Hole (Diameter): 2-1/8" (54 mm)
• Agtergrond: 2-3/8" of 2-3/4" (60 mm of 70 mm)

Figure 2: Door compatibility and dimension requirements for installation.

4.2. Installasiestappe

Vir 'n visuele gids, kyk asseblief na die amptelike installasievideo:

1. Berei die deur voor: Use the provided drilling template to mark and drill holes if necessary. Ensure the existing deadbolt is removed.
2. Installeer Deadbolt: Insert the deadbolt into the door edge. Ensure the 'TOP' marking on the deadbolt is facing upwards. Adjust the backset if needed (70mm by twisting the neck while holding the body).
3. Install Exterior Body: Keep the key tail in the unlocked position. If the door hole is less than 2-1/8" (54mm), remove the adapter ring by unscrewing the two screws on either side. Lay the cable under the deadbolt, ensuring it is not twisted or pinched.
4. Installeer Montageplaat: Secure the mounting plate to the door using the appropriate screws. Ensure the cable passes through the plate without obstruction.
5. Install Interior Body: Connect the cable from the exterior body to the interior body. Check that the knob points in the same direction as the key tail. Secure the interior body to the mounting plate using the provided screws.
6. Test Key and Thumbturn: Insert a traditional key and turn it to ensure smooth operation of the deadbolt. Test the thumbturn on the interior body. If the deadbolt does not lock or unlock smoothly, recheck the tailpiece insertion.
7. Insert Batteries and Attach Cover: Insert 4 AA alkaline batteries into the interior body. Attach the battery cover. The keypad should light up.
8. Install Door Sensor: Attach the magnet bracket sensor to the door frame within 1" x 2" of the lock. Ensure the sensor is operational and secure with screws. (Note: Installation is not recommended on iron doors).

5. Opstelling en Programmering

After physical installation, proceed with programming your lock for secure and convenient access. The default administrator PIN code is 123456. It is highly recommended to change this immediately.

5.1. App-aflaai en -verbinding

To utilize the smart features, download the 'SMART SOLITY' app from Google Play or the App Store.

Figure 3: Steps to download the Smart Solity app and add your lock. Laai af op die App Store

For a visual guide on app connection, please watch the official video:

5.2. Programmeringsgids

For a visual guide on programming, please watch the official programming video:

• Change Administrator PIN Code:
  Druk R > Enter Administrator PIN code > # > 0 > Enter New Administrator PIN code (6-12 digits) > #
• Add User PIN Code:
  Druk R > Enter Administrator PIN code > # > 1 > Enter New User PIN code (4-12 digits) > #
  (Note: Enter additional user PIN codes before keypad light turns off. Press an address code 1-4 before entering new user PIN code and deleting PIN code stored in this location individually later.)
• Add One-Time PIN Code:
  Druk R > Enter Administrator PIN code > # > 4 > Enter One-time PIN code (6 digits) > #
  (Note: One-time PIN code will go invalid after using it to open the door once.)
• Add Fingerprints (GT10BK only):
  Druk R > Enter Administrator PIN code > # > 3 > Place New Fingerprint on the sensor 3 times.
  (Note: Enter additional fingerprints before keypad light turns off. Press an address code 1-100 before entering new user fingerprint and deleting fingerprint stored in this location individually later.)
• Delete User PIN Code:
  Druk R (3 SEC) > Enter Administrator PIN code > # > 1 > Druk address code 1-4 to delete individual user PIN code > *
  OR Press # > 3 > SEC to delete all user PIN codes.
• Delete One-Time PIN Code:
  Druk R (3 SEC) > Enter Administrator PIN code > # > 4 > *
• Delete User Fingerprint:
  Druk R (3 SEC) > Enter Administrator PIN code > # > 3 > Druk address code 1-100 to delete individual user fingerprint > *
  OR Press # > 3 > SEC to delete all user fingerprints.

6. Bedryfsinstruksies

6.1. Toegangsmetodes

Figure 4: Various access methods including fingerprint, PIN code, and traditional key.

• Vingerafdruk: Plaas jou geregistreerde vinger op die sensor. Die slot sal binne ongeveer 0.3 sekondes ontsluit.
• PIN-kode: Enter your registered PIN code on the touchscreen keypad, followed by '#'.
• Programbeheer: Use the 'SMART SOLITY' app to remotely lock or unlock your door.
• Tradisionele Sleutel: Steek die fisiese sleutel in die sleutelgat en draai om te ontsluit.

6.2. Auto-Lock Features

Figure 5: Auto-lock features including timed auto-lock, door sensor, and silent mode.

• Timed Auto-Lock: The lock can be set to automatically lock after a period of 5-180 seconds. To enable/disable or set the time, refer to the programming video.
• Door Sensor Detection: With the magnetic door sensor installed, the lock detects when the door is closed and instantly locks.
• Stille modus: Activate silent mode for noise-free operation during quiet entry and exit.

6.3. Multilingual Voice Assistance

Figure 6: Multilingual voice assistance supporting English, Spanish, and French.

The lock provides premium voice assistance in English, Spanish, and French for operational guidance and alerts. Refer to the programming video for changing the voice guide language.

6.4. Remote App Management

Figure 7: Screenshots of the mobile app for access management, log records, and user management.

The 'SMART SOLITY' app allows you to:

• Manage access methods (fingerprints, PINs).
• View log records of all entries and exits.
• Manage users, including adding/deleting users and setting temporary access.
• Receive real-time activity alerts and low battery notifications.

7. Onderhoud

7.1. Battery vervanging

The Solity GT10BK requires 4 AA alkaline batteries. When the battery level is low, you will receive a notification via the app and the lock will provide an audible alert. To replace batteries:

1. Remove the battery cover on the interior body.
2. Verwyder die ou batterye.
3. Plaas 4 nuwe AA alkaliese batterye in en maak seker dat die polariteit korrek is.
4. Vervang die batterydeksel.

7.2. Skoonmaak

To clean the lock, use a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.

8. Probleemoplossing

• Slot reageer nie: Kontroleer batteryvlakke en vervang indien nodig. Maak seker dat die slot behoorlik geïnstalleer is en dat alle kabels gekoppel is.
• PIN-kode werk nie: Verify the PIN code is correct. Ensure the lock is not in silent mode if expecting audible feedback. Re-register the PIN code if issues persist.
• Vingerafdruk nie herken nie: Ensure your finger is clean and dry. Try re-registering your fingerprint.
• Probleme met programverbinding: Ensure your home Wi-Fi is stable and the lock is within range. Restart the app and try reconnecting.
• Auto-lock not functioning: Verify the door sensor is correctly installed and aligned. Check auto-lock settings in the app or via programming.

9. Spesifikasies

10. Waarborg en Ondersteuning

Solity stands behind its products with dedicated customer service available around the clock. For any inquiries or assistance, please contact our support team. We are committed to ensuring you have the support you need, whenever you need it.