LUTEC Rechargeable LED Work Light

1. Veiligheidsinligting

Lees en verstaan ​​asseblief hierdie hele handleiding voordat u probeer om die produk aanmekaar te sit, te bedryf of te installeer.

WAARSKUWING:

• Onder beledigende toestande kan vloeistof uit die battery gegooi word; kontak vermy. As kontak per ongeluk voorkom, spoel met water. As vloeistof met die oë in aanraking kom, soek ook mediese hulp. Vloeistof wat uit die battery uitgestoot word, kan irritasie of brandwonde veroorsaak.
• Moenie 'n batterypak of toestel gebruik wat beskadig of aangepas is nie. Beskadigde of gewysigde batterye kan onvoorspelbare gedrag toon wat brand, ontploffing of risiko van besering tot gevolg het.
• Moenie 'n batterypak of toestel aan vuur of oormatige temperatuur blootstel nie. Blootstelling aan vuur of temperatuur bo 266°F (130°C) kan ontploffing veroorsaak.
• Volg alle laaiinstruksies en moenie die batterypak of toestel buite die temperatuurbereik laai wat in die instruksies gespesifiseer word nie. Deur onbehoorlik te laai of teen temperature buite die gespesifiseerde reeks kan die battery beskadig en die risiko van brand verhoog.
• Laat dienswerk verrig deur 'n gekwalifiseerde herstelpersoon wat slegs identiese vervangingsonderdele gebruik. Dit sal verseker dat die veiligheid van die produk gehandhaaf word.
• Moenie die toestel of die batterypak (soos van toepassing) verander of probeer herstel nie, behalwe soos aangedui in die gebruiks- en sorginstruksies.
• When work light is in use or charging, make sure there is adequate space to allow ventilation of internally generated heat.
• Do not look directly into the light over specified time.
• GESKIK VIR NAT NAT LIGGINGS.
• CAUTION: DO NOT STARE AT OPERATING LAMP.

Operating temperature: 14°F (-10°C) to 104°F (40°C)
Charging temperature: 32°F (0°C) to 104°F (40°C)
Storage temperature: 14°F (-10°C) to 104°F (40°C) (up to 3 months)

2. Pakketinhoud

Verify that all components are present and undamaged. If any part is missing or broken, contact customer service.

Image: LUTEC Rechargeable LED Work Light and included USB-C charging cable.

3. Opstelling

3.1 Charging the Work Light

The work light features a built-in rechargeable battery. When the battery indicator lights begin to flash, it means that the fixture needs to be charged.

1. Lift the USB port cover on the side to reveal the Type-C charging port.
2. Plug the USB cable (B) into the charge port.
3. Plug the other end of the USB cable into a USB power adapter (5V 2A) (not included).

Charging time for a full charge is approximately 2.5-3.5 hours. Keep the unit away from water while charging.

Image: The LUTEC Work Light connected to a USB-C cable for charging, showing the battery level indicator.

3.2 Batteryniveau-aanwyser

The work light is equipped with a battery indicator light to show the remaining power:

• 4 lights: 100% charged
• 3 lights: 75%-99% charged
• 2 lights: 50%-74% charged
• 1 light: 25%-49% charged
• Flashing lights: <24% charged (needs charging)

Image: Close-up of the LUTEC Work Light's battery level indicator, showing four green lights for a full charge.

4. Operasie

4.1 Aanskakel/Afskakel en Helderheidsaanpassing

The work light features 3 different brightness levels (1000 lm - 500 lm - 250 lm) to meet various lighting needs.

1. Press the red power switch on the side once to turn on the light to 100% brightness (1000 lumens).
2. Press the power switch a second time to reduce brightness to 50% (500 lumens).
3. Press the power switch a third time to reduce brightness to 25% (250 lumens).
4. Press the power switch a fourth time to turn off the light.

When the light is on, press and hold the red power switch for 3 seconds to turn the light off directly from any brightness setting.

Image: Visual representation of the three brightness settings (High, Mid, Low) for the LUTEC Work Light.

4.2 Rotation and Swivel

The work light head can be adjusted to provide multi-angle illumination.

• The light head rotates 360° horizontally.
• The light head swivels up to 200° vertically.

Image: Diagrams illustrating the 360° swivel and 200° tilt capabilities of the work light.

4.3 Montage-opsies

The work light offers versatile mounting options for hands-free use.

• Magnetiese basis: The base has strong magnets that can be attached to iron surfaces, such as car hoods, metal shelves, or toolboxes. Ensure the light is firmly magnetized before use.
• Hanghaak: A telescopic clip-style hook allows the light to be hung from ropes, branches, tents, or other suitable objects. The hook supports hanging from a maximum of 2 inches wide objects.

Image: The work light demonstrating its magnetic base, attached to a metal surface to illuminate a workspace.

Image: The work light utilizing its foldable snap hook to hang from a backpack, providing hands-free illumination.

5. Onderhoud

Proper maintenance ensures the longevity and optimal performance of your LUTEC Work Light.

• Versorging en skoonmaak: Be sure the device is disconnected from its power source and allow the light to cool down before cleaning. Cleaning is performed with a soft cloth and a non-abrasive cleaner. Avoid harsh chemicals.
• Berging: Store in a cool, dry place away from direct sunlight. For storage longer than 1 month, charge completely before storage, and recharge approximately every 3 months to maintain full charge.
• Batterylewe: Battery life may decrease over time with repeated charging/discharging cycles. To prolong battery life, avoid fully discharging the battery frequently.
• Vervanging: Do not attempt to replace the battery or charging cable yourself. Contact customer service for assistance.

Image: The durable design of the work light, showing resistance to water splashes and impacts.

6. Probleemoplossing

If you encounter issues with your work light, refer to the table below for common problems and solutions.

7. Spesifikasies

• Modelnommer: 7902202426
• Ligbrontipe: Ligemitterende diode (LED)
• Aantal ligbronne: 30 LED krale
• Helderheidsvlakke: 1000 lumens (High), 500 lumens (Medium), 250 lumens (Low)
• Kleur temperatuur: 4000 XNUMX Kelvin (Bright White)
• Kragbron: Batteryaangedrewe (1 litiumioonbattery ingesluit)
• Laai tyd: 2.5-3.5 hours via Type-C port
• Rotasie: 360°
• Swivel/Tilt: 200°
• Montage tipe: Magnetic Mount, Hanging Mount (clip hook)
• Materiaal: Aluminium, Polikarbonaat (PC)
• Afmetings (L x B x H): 2.28" x 4.57" x 4.72"
• Gewig: Ongeveer 0.73 pond
• Duursaamheid: Sealed against daily impacts and water splashes

Image: Chart detailing battery capacity and estimated runtime at various brightness settings.

8. Produk verbyview Video

Watch this official product video from LUTEC for a visual overview of the work light's features and functionality.

9. Waarborg en Ondersteuning

9.1 3-jaar beperkte waarborg

Indien hierdie produk misluk as gevolg van 'n defek in materiaal of vakmanskap binne drie (3) jaar vanaf die aankoopdatum, stuur dit terug saam met bewys van aankoopdatum en dit sal gratis met dieselfde of vergelykbare model vervang word.

Hierdie waarborg is nietig indien skade of defek voortgespruit het uit ongeluk, misbruik, misbruik of foutiewe herstel. Hierdie waarborg gee jou spesifieke wetlike regte en jy kan ander regte hê wat van staat tot staat verskil.

IN GEEN GEVAL SAL AANSPREEKLIKHEID UITTREK TOT ENIGE GEVOLLIKE, SPESIALE, TOVALLE OF INDIREKTE SKADE VAN ENIGE AARD WAT UIT DIE GEBRUIK OF MISBRUIK VAN HIERDIE PRODUK VOORTSTAAN NIE. SOMMIGE STATE LAAT NIE DIE UITSLUITING OF BEPERKING VAN TOEVALLE OF GEVOLLIKE SKADE TOE NIE SO DIE BOGENOEMDE UITSLUITING OF BEPERKING MAG NIE OP JOU VAN TOEPASSING IS NIE.

9.2 Kliëntediens

For assistance, please contact LUTEC Customer Service:

• Telefoon: 877-714-8869
• Ure: Monday - Friday, 9 a.m. to 5 p.m. EST
• Webwebwerf: www.lutec.com

Vervaardiger: LUTEC VSA LLC
1498 Hixson Rd, Troutman NC 28166
Ningbo LUTEC Electric Co. LTD
CNI, Fnr East Industry Park, Yuyao, China