Memphis Audio SRX693V

Memphis Audio SRX693V 6x9 Inch 3-Way Coaxial Speakers

Instruksie Handleiding

Inleiding

This manual provides essential information for the proper installation, operation, and maintenance of your Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speakers. Please read this manual thoroughly before attempting installation or use to ensure optimal performance and longevity of your product.

Veiligheidsinligting

  • Ontkoppel altyd die voertuig se battery se negatiewe terminaal voordat u enige elektriese werk begin.
  • Maak seker dat alle bedrading behoorlik geïsoleer is om kortsluitings te voorkom.
  • Mount speakers securely to prevent them from becoming loose during vehicle operation.
  • Avoid installing speakers in locations that obstruct vehicle safety features or driver visibility.
  • Raadpleeg 'n professionele motor-klankinstalleerder as u onseker is oor enige installasiestappe.

Pakketinhoud

The package for your Memphis Audio SRX693V speakers should contain the following items:

  • SRX693V 6x9 Inch 3-Way Coaxial Speakers (Pair)

Spesifikasies

HandelsmerkMemphis oudio
Model NaamSRX693V
Tipe luidsprekerKoaksiaal
Luidsprekergrootte9 Inches (6x9 inch oval)
Luidspreker Maksimum uitsetkrag110 Watt
VerbindingstegnologieKoaksiaal
Montage tipeSpoelberg
Itemafmetings (D x B x H)9.8" D x 7.3" B x 7.4" H
Item gewig5.4 pond
KegelmateriaalPolipropileen
Tweeter materiaalPEI
Omliggende materiaalRubber

Opstelling en installasie

Proper installation is crucial for optimal sound quality and speaker longevity. Follow these general steps:

  1. Voorbereiding: Disconnect the vehicle's battery. Identify suitable mounting locations for the 6x9 inch speakers, typically in door panels or rear deck. Ensure adequate clearance for the speaker's depth.
  2. Montering: If replacing existing speakers, remove the old units. Use the provided template (if available) or the speaker itself to mark and cut the mounting hole if necessary. Secure the speakers using appropriate screws and mounting hardware.
  3. Bedrading: Connect the speaker wires to your vehicle's audio system. Pay close attention to polarity (+ to + and - to -) to ensure correct phase and sound reproduction. The SRX693V speakers are designed for coaxial connection.
  4. Toets: Reconnect the vehicle's battery. Turn on your audio system at a low volume to test the speakers. Gradually increase the volume and check for clear sound from both speakers.
  5. Afwerking: Reassemble any removed panels or grilles.
Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker, front view

Figuur 1: Voorkant view of the Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker.

Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker, angled view showing cone and tweeters

Figuur 2: Hoekig view of the SRX693V speaker, highlighting the polypropylene cone and PEI tweeters.

Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker, side profile showing mounting depth

Figuur 3: Syprofile of the SRX693V speaker, illustrating its slim mounting depth.

Agter view of the Memphis Audio SRX693V 6x9 inch 3-Way Coaxial Speaker, showing the magnet and terminals

Figuur 4: Agter view of the SRX693V speaker, showing the magnet structure and wiring terminals.

Bedryfsinstruksies

Once installed, your Memphis Audio SRX693V speakers will operate as part of your vehicle's audio system. For optimal performance:

  • Oudiobron: Maak seker dat jou hoofeenheid of amplifier is properly configured to send audio signals to the speakers.
  • Volumebeheer: Adjust the volume to a comfortable listening level. Avoid prolonged listening at excessively high volumes to prevent speaker damage and hearing loss.
  • gelykstelling: Use your audio system's equalizer settings to fine-tune the sound to your preference. Start with flat settings and make small adjustments.
  • Inbreekperiode: Allow a short break-in period (typically a few hours of normal use) for the speaker components to settle, which can improve sound quality.

Onderhoud

Your Memphis Audio SRX693V speakers require minimal maintenance:

  • Skoonmaak: Vee die luidsprekerroosters en -omringings liggies af met 'n sagte, droë lap om stof te verwyder. Vermy die gebruik van harde chemikalieë of skuurmiddels.
  • Inspeksie: Periodically check the speaker mounts and wiring connections to ensure they remain secure.
  • Omgewingsfaktore: While designed for automotive use, avoid exposing speakers to excessive moisture or extreme temperatures.

Probleemoplossing

If you encounter issues with your speakers, consider the following:

ProbleemMoontlike oorsaakOplossing
Geen geluid van luidsprekers nieLoose wiring connection, incorrect polarity, amplifier issue, head unit settings.Check all wiring connections for tightness and correct polarity. Verify amplifier and head unit are powered on and configured correctly.
Verwronge klankOver-driving speakers (volume too high), incorrect amplifier gain settings, damaged speaker.Verminder volume. Pas aan. amplifier gain settings. Inspect speaker cone and surround for visible damage.
Een luidspreker werk nieLoose connection to that specific speaker, damaged speaker wire, faulty speaker.Check wiring for the non-working speaker. Swap speakers (if possible) to determine if the issue is with the speaker or the wiring/source.

Waarborg en Ondersteuning

Your Memphis Audio SRX693V speakers are covered by a 1-jaar vervaardigerwaarborg. Hierdie waarborg dek defekte in materiaal en vakmanskap onder normale gebruik.

For warranty claims, technical support, or further assistance, please contact Memphis Audio customer service or visit their official webwebwerf. Bewaar u bewys van aankoop vir waarborgvalidering.

© 2026 Memphis Audio. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.