Winees WiFi Water Leak Detector S1 Lite Instruction Manual

1. Produk verbyview

The Winees WiFi Water Leak Detector S1 Lite is designed to provide real-time water leak detection and alerts, helping to prevent potential water damage in your home. This system includes a central hub and compact water sensors that communicate wirelessly.

Image: Winees S1 Lite Water Leak Detector Hub and Sensor.

• Afstandmonitering: Connect the hub to 2.4G WiFi for real-time monitoring via a mobile application.
• Wide Transmission Range: Sensors can communicate with the hub up to 100 meters (328 feet) away, even in basements.
• Kitskennisgewings: Receive alerts via the app, email, and SMS when a water leak is detected.
• Adjustable Alarm: The hub features a 100dB alarm with high, medium, and low volume settings, and an instant mute function.
• Compact & Waterproof Sensors: Sensors are only 1.8mm thick, IP66 waterproof, and designed for placement in hidden corners.
• IFTTT Compatible: Integrates with IFTTT for enhanced smart home automation.

2. Wat is in die boks

Your Winees WiFi Water Leak Detector S1 Lite package includes the following components:

• 1 x Wi-Fi Hub
• 1 x Water Leak Sensor
• 1 x CR2450 Battery (pre-installed in sensor)
• 1 x Battery Cover Tool
• 1 x Vinnige Begingids

Image: The Winees S1 Lite package contents, showing the hub, a sensor, and the quick start guide.

3. Opstelinstruksies

3.1 Download the AiDot App

1. Soek vir "AiDot" in your smartphone's app store (iOS or Android).
2. Laai die toepassing af en installeer dit.
3. Create an account and follow the in-app instructions to confirm your email.

3.2 Activate the Sensor Battery

Before use, activate the sensor by removing the plastic insulation tab from the battery compartment.

1. Use the supplied battery cover tool or a coin to gently twist and open the back cover of the sensor.
2. Remove the plastic insulation tab covering the CR2450 battery.
3. Replace the battery cover, ensuring it is securely closed.

Image: Activating the sensor battery by removing the plastic tab.

3.3 Plug in the Wi-Fi Hub

Plug the Wi-Fi hub into a standard electrical outlet in an area with good 2.4G WiFi signal coverage. The hub will automatically enter pairing mode.

3.4 Add Devices to the App

The water leak sensor is pre-paired with the hub by default. If you need to add additional sensors or re-pair, follow these steps:

1. Open the AiDot app and navigate to "My Home".
2. Tap "Add Device" or the '+' icon.
3. Scan the QR code located on the back of each sensor.
4. Follow the on-screen prompts to assign the sensor to a room (e.g., Kitchen, Laundry Room, Basement) for easy identification.

Image: Direct pre-pairing between the hub and sensor for simplified setup.

4. Bedryfsinstruksies

4.1 Sensorplasing

Place the water leak sensors in areas prone to water leaks, ensuring they lie flat on the ground. Common locations include:

• Onder wasbakke (kombuis, badkamer)
• Near washing machines or dishwashers
• In kelders of nutsruimtes
• Near water heaters or sump pumps

Image: The 1.8mm thin sensor can be placed discreetly in any corner.

Image: Connect multiple sensors throughout your home for comprehensive coverage.

4.2 Ontvangs van waarskuwings

When a water leak is detected, the system will trigger multiple alert modes:

• Hoorbare alarm: The hub will sound a 100dB alarm.
• App-kennisgewings: Receive instant push notifications on your smartphone via the AiDot app.
• Email & SMS: Configured email addresses and phone numbers will receive alerts.

Image: Multiple notification methods ensure you are always informed of a leak.

4.3 Alarmbeheer

• Pas volume aan: The hub has buttons to adjust the alarm volume (high/medium/low).
• Demp alarm: Press any button on the hub or use the AiDot app to instantly mute the alarm.
• Alarm Tydsduur: Configure alarm duration settings (always ringing, 10 minutes, 1 minute, 30 seconds) via the app.

Image: Adjustable volume settings for the hub alarm.

Image: One-key function to turn off the alarm.

4.4 Amptelike Produkvideo

Video: An official product video from Winees demonstrating the S1 Plus Water Leak Detector's features and benefits.

5. Onderhoud

5.1 Batteryvervanging

The water leak sensor uses a CR2450 Lithium-Ion battery. The battery life is approximately 365 days. When the battery is low, the app will notify you. To replace the battery:

1. Use the supplied battery cover tool or a coin to gently twist and open the back cover of the sensor.
2. Verwyder die ou CR2450-battery.
3. Plaas 'n nuwe CR2450-battery met die positiewe (+) kant na bo.
4. Replace the battery cover, ensuring it is securely closed.

6. Probleemoplossing

If you encounter issues with your Winees WiFi Water Leak Detector S1 Lite, consider the following:

• Geen waarskuwings nie: Ensure the hub is connected to a stable 2.4G WiFi network and the sensors are within the 100m transmission range. Check app notification settings and email/SMS spam folders.
• Vals alarms: Verify that sensors are placed on a dry, flat surface and not in areas prone to condensation or accidental splashes.
• Verbindingskwessies: Restart the Wi-Fi hub and your home router. Ensure the hub is placed in an area with strong WiFi signal.
• Sensor reageer nie: Check the sensor battery level in the app. If low, replace the battery. Re-pair the sensor with the hub if necessary.

For further assistance, refer to the detailed troubleshooting section in the AiDot app or contact Winees customer support.

7. Spesifikasies

8. Waarborg en Ondersteuning

Winees is committed to providing high-quality products and customer satisfaction.

• 30-dae terugkeerbeleid: Enjoy a 30-day return window with no questions asked.
• 24-Month Unconditional Replacement: Products are eligible for unconditional replacement within 24 months of purchase.
• Lewenslange waarborg: Winees provides permanent service and technical support for its products.
• 24-Hour Quick Response: Verwag 'n vinnige antwoord op u navrae binne 24 uur.

For support, please visit the official Winees webwebwerf of kontak hul kliëntediens span direk.