HOOBRO Bar Table with Charging Station

Inleiding

This manual provides instructions for the assembly, setup, operation, and maintenance of your HOOBRO Bar Table with Charging Station, Model BG90UBT01. This versatile table is designed to function as a console table, coffee bar, or workspace, featuring an integrated charging station for convenience.

Image: The HOOBRO Bar Table with Charging Station, Model BG90UBT01, shown in a kitchen environment with two bar stools, highlighting its compact design and integrated charging capabilities.

Veiligheidsinligting

• Ensure the table is placed on a stable, level surface to prevent tipping.
• Moenie die maksimum gewigskapasiteit oorskry nie 88 pond (40 kg) on the tabletop to avoid damage or instability.
• Always connect the charging station's power cord to a properly grounded electrical outlet.
• Hou vloeistowwe weg van die laaistasie om elektriese gevare te voorkom.
• Kontroleer gereeld alle skroewe en verbindings om te verseker dat hulle styf bly.

Pakketinhoud

Voordat u met die montering begin, maak seker dat alle komponente teenwoordig en onbeskadig is. Indien enige onderdele ontbreek of beskadig is, kontak asseblief kliëntediens.

• Tabletop (Greige)
• Metal Frame Components (Legs, Crossbar, Stable Supports)
• Laaistasie-eenheid met kragkabel
• Verstelbare voete
• Vergaderingsgids
• Installation Tool (Screwdriver)
• Fasteners and Hardware (Screws, etc.)

Monteer-instruksies

Assembly of the HOOBRO Bar Table is designed to be straightforward and can typically be completed by one person. Follow the detailed instructions provided in the included assembly guide. All necessary tools are supplied.

1. Pak komponente uit: Verwyder alle dele versigtig uit die verpakking en lê dit op 'n skoon, sagte oppervlak om skrape te voorkom.
2. Stel raam bymekaar: Attach the metal frame components (legs, crossbar, stable supports) according to the diagrams in the assembly guide. Ensure all screws are finger-tightened initially.
3. Heg tafelblad aan: Secure the tabletop to the assembled frame using the provided hardware.
4. Installeer laaistasie: Carefully insert the charging station unit into the designated cutout on the tabletop and secure it with screws.
5. Draai alle skroewe vas: Once all components are in place, fully tighten all screws using the provided installation tool. Do not overtighten.
6. Heg verstelbare voete aan: Screw the adjustable feet into the bottom of the table legs.

Image: A diagram illustrating the dimensions of the HOOBRO Bar Table, including length (90cm/35.4"), width (40cm/15.7"), and height (90.5cm/35.6"), along with the power cord length (84cm/33").

Beeld: Gedetailleerd view of the table's structural elements, including the bottom crossbar for enhanced stability and the triangular stable supports connecting the tabletop to the legs.

Image: A close-up showing the adjustable foot at the base of a table leg, designed to provide stability on uneven surfaces.

Opstelling en Bedryfsinstruksies

Tafelplasing

Position the bar table in your desired location, ensuring it is on a flat, stable surface. Adjust the leveling feet as needed to eliminate any wobble.

Opstelling van laaistasie

1. Locate the power cord extending from the charging station unit.
2. Plug the power cord into a standard 120V AC wall outlet. The power cord length is approximately 4.9 feet (1.5 meters).
3. Maak seker dat die verbinding veilig is.

Gebruik die laaistasie

Die geïntegreerde laaistasie bied gerieflike kragtoegang vir jou elektroniese toestelle.

• AC afsetpunte: The station includes two 120V/12A AC outlets. Plug in small appliances or chargers as needed.
• USB-poorte: One standard USB port (5V/2A) is available for charging compatible devices.
• Tipe C-poort: One Type-C port (5V/2A) is available for charging compatible devices.

Simply connect your device's charging cable to the appropriate port. The charging station is ready for use once plugged into a power source.

Beeld: 'n Gedetailleerde view of the built-in charging station on the HOOBRO Bar Table, showing two AC outlets, one USB port, and one Type-C port, along with their electrical specifications.

Onderhoud

• Skoonmaak: Vee die tafeloppervlaktes af met 'n sagte, damp cloth. Avoid using abrasive cleaners or harsh chemicals, as these may damage the finish.
• Elektriese komponente: Hou die laaistasie skoon en stofvry. Moenie probeer om die elektriese komponente self uitmekaar te haal of te herstel nie.
• Hardewarekontrole: Periodically inspect all screws and connections to ensure they are tight. Retighten if necessary to maintain stability.

Probleemoplossing

Table Wobbles After Assembly

• Gaan verbindings na: Ensure all screws are fully tightened. Loose connections are a common cause of instability.
• Pas voete aan: Use the adjustable feet at the bottom of the legs to level the table on uneven floors. Rotate them clockwise or counter-clockwise until the table is stable.
• Herstel: If wobbling persists, disassemble the table and carefully re-assemble, ensuring all parts are correctly aligned according to the instructions.

Laaistasie funksioneer nie

• Kragverbinding: Verify that the power cord is securely plugged into both the table's charging unit and a live wall outlet.
• Muuraansluiting: Toets die muuraansluiting met 'n ander toestel om te verseker dat dit krag verskaf.
• Oorlading: Ensure the charging station is not overloaded beyond its specified capacity (120V/12A for AC outlets, 5V/2A for USB/Type-C).
• Kontak ondersteuning: If the charging station still does not work, contact HOOBRO customer support for assistance. Do not attempt electrical repairs yourself.

Spesifikasies

Waarborg en Ondersteuning

For specific warranty details, product support, or to inquire about replacement parts, please refer to the contact information provided with your purchase or visit the official HOOBRO webwerf. Hou jou aankoopkwitansie vir waarborgeise.

U kan ook die HOOBRO Store on Amazon vir bykomende inligting en ondersteuningsbronne.