1. Veiligheidsinligting
Please read and understand this entire manual before attempting to assemble, operate, or install the product. Failure to do so could lead to electric shock, fire, or other injuries that could be fatal or cause serious damage.
- WAARSKUWING: Risiko van elektriese skok. Ontkoppel die krag by die sekering of stroombreker voor installasie of onderhoud.
- This fixture is intended for installation in accordance with the National Electrical Code (NEC) and local code specifications. If you are not familiar with these codes, a qualified electrician should perform the installation.
- Moenie hierdie toestel op oppervlaktes installeer wat maklik vlambaar is nie.
- Maak seker dat alle verbindings veilig en behoorlik geïsoleer is.
- Moenie direk in die LED-ligbron kyk nie.
2. Pakketinhoud
Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin.
- LED Flood Light Fixture (1)
- Monteer hardeware Kit (1)
- Handleiding (1)
3. Spesifikasies
| Spesifikasie | Waarde |
|---|---|
| Modelnommer | 17000207 |
| Kragbron | Hardbedraad |
| Wattage | 32 Watt |
| Helderheid | 3200 Lumen |
| Kleur temperatuur | 4000 Kelvin (Daylight White) |
| Bewegingsopsporingsone | 240 degrees, up to 50 ft (15 m) |
| Materiaal | Plastiek |
| Binne/buiteluggebruik | Buitelug |
| Waterweerstandvlak | Waterbestand |
| Afmetings (L x B x H) | 7" x 12" x 8.4" |
| Waarborg | 2 jaar vervaardiger se beperkte waarborg |
Image: Product dimensions for planning installation space.
4. Opstelling en installering
This flood light is hardwired and requires connection to your home's electrical system. If you are not comfortable with electrical wiring, it is recommended to consult a qualified electrician.
4.1 Montage-opsies
The fixture offers dual mounting capabilities, allowing for installation on a wall or under an eave. The canopy can be rotated to accommodate the desired position.
Image: Wall mount and eave mount installation options.
4.2 Installasiestappe
- Skakel krag af: Before starting, ensure the power to the installation area is turned off at the circuit breaker or fuse box.
- Install Mounting Bar: Secure the mounting bar onto the junction box.
- Installeer Montageplaat: Attach the mounting plate to the mounting bar.
- Draadverbindings: Connect the fixture's wires to your home's electrical wires according to local codes (typically black to black, white to white, and ground to ground). Use wire nuts to secure connections.
- Heg toebehore aan: Secure the flood light fixture to the mounting plate using the center bolt.
- Seël: Apply weather-resistant sealant around the mounting plate to prevent water intrusion.
- Herstel krag: Once installation is complete and secure, restore power to the circuit.
Beeld: Stap-vir-stap installasiegids.
5. Bedryfsinstruksies
The Globe Electric 17000207 flood light features motion activation and adjustable settings for optimal performance.
5.1 Motion Activation
The integrated motion sensor detects movement within a 240-degree zone, up to 50 feet (15 meters) away. The light will activate when motion is detected within this range.
Image: Motion detection zone illustration.
5.2 MotionBright™ 2-Level Lighting
This feature provides constant low ambient lighting when no motion is detected, and automatically switches to full brightness when motion is sensed, enhancing security and saving energy.
Image: MotionBright feature demonstrating low and full brightness modes.
5.3 Aanpassing van instellings
The motion sensor unit has adjustable dials to customize the light's behavior:
- Betyds: Adjusts how long the light stays on after motion is detected (1, 5, or 20 minutes, or Test mode).
- Sens (Sensitivity): Controls the range and sensitivity of the motion sensor (Low, Med, High).
- Helderheid: Adjusts the overall brightness of the light (Low, High).
- MotionBright: Selects the operating mode (OFF, Dusk to Dawn, Hour).
Image: Control dials for adjusting light settings.
5.4 Adjusting Lamp Koppe
Die drie LED-lamp heads are independently adjustable, allowing you to direct the light precisely where needed for optimal coverage.
Image: Adjustable lamp heads for directing light.
6. Onderhoud
This LED flood light is designed for minimal maintenance.
- Skoonmaak: Om die toestel skoon te maak, maak seker dat die krag afgeskakel is. Vee af met 'n sagte, damp lap. Moenie skuur skoonmaakmiddels of oplosmiddels gebruik nie.
- LEDs: The integrated LED lights are not user-replaceable. Do not attempt to open the lamp koppe.
- Sensor: Keep the motion sensor lens clean and free from obstructions (e.g., dirt, spiderwebs) to ensure proper operation.
7. Probleemoplossing
If you experience issues with your flood light, refer to the following common problems and solutions:
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Lig skakel nie aan nie. | No power, faulty wiring, sensor blocked, incorrect settings. | Check circuit breaker. Verify wiring connections. Clear sensor lens. Adjust 'On Time' or 'Sens' settings. |
| Lig bly voortdurend aan. | Continuous motion detected, 'On Time' set too long, 'MotionBright' setting. | Ensure no constant motion in detection zone. Adjust 'On Time' to a shorter duration. Check 'MotionBright' setting (e.g., if set to 'Dusk to Dawn'). |
| Motion not detected reliably. | Sensor blocked, sensitivity too low, incorrect angle. | Clear sensor lens. Increase 'Sens' setting. Adjust sensor angle for optimal coverage. |
| Ligte flikkerings. | Loose wiring connection, power fluctuations. | Check all wiring connections for tightness. Consult an electrician if power fluctuations are suspected. |
8. Waarborg en Ondersteuning
This Globe Electric product is backed by a 2 jaar vervaardiger se beperkte waarborg vanaf die aankoopdatum. Hierdie waarborg dek defekte in materiaal en vakmanskap onder normale gebruik.
For warranty claims, technical assistance, or further inquiries, please contact Globe Electric customer support. Keep your proof of purchase for warranty validation.
Vir meer inligting, besoek die Globe Electric Store on Amazon.