FLEX 24V Borsellose Koordlose 1/2-Duim Hamerboor Turbo Modus Stel (FX1271T-2B) Instruksiehandleiding

1. Inleiding

This manual provides instructions for the safe operation, maintenance, and troubleshooting of your FLEX 24V Brushless Cordless 1/2-Inch Hammer Drill Turbo Mode Kit, model FX1271T-2B. Please read this manual thoroughly before using the tool to ensure proper and safe operation.

The FLEX FX1271T-2B is a powerful 24V brushless cordless hammer drill designed for demanding drilling and driving applications. It features a 1/2-inch full-metal ratcheting chuck, two-speed settings, a Turbo Mode for increased speed, and an anti-kickback safety feature. This kit includes the drill, a 2.5Ah Lithium-Ion Battery, a 5.0Ah Lithium-Ion Battery, and a 160W Fast Charger.

Figure 1: FLEX 24V Brushless Cordless 1/2-Inch Hammer Drill Kit (FX1271T-2B) including drill, two batteries, charger, and carrying case.

2. Algemene Veiligheidsinstruksies

WAARSKUWING: Lees alle veiligheidswaarskuwings, instruksies, illustrasies en spesifikasies wat by hierdie elektriese gereedskap voorsien word. Versuim om alle instruksies hieronder gelys te volg, kan elektriese skok, brand en/of ernstige beserings tot gevolg hê.

2.1 Werkareaveiligheid

• Hou werkarea skoon en goed belig. Deurmekaar of donker areas nooi ongelukke uit.
• Moenie elektriese gereedskap in plofbare atmosfeer gebruik nie, soos in die teenwoordigheid van vlambare vloeistowwe, gasse of stof. Elektriese gereedskap skep vonke wat die stof of dampe kan aansteek.
• Hou kinders en omstanders weg terwyl 'n elektriese gereedskap gebruik word. Afleidings kan veroorsaak dat jy beheer verloor.

2.2 Elektriese veiligheid

• Kraggereedskapproppe moet by die uitlaat pas. Moet nooit die prop op enige manier verander nie. Moenie enige adapterproppe met geaarde (geaard) kraggereedskap gebruik nie. Ongewysigde proppe en bypassende afsetpunte sal die risiko van elektriese skok verminder.
• Vermy liggaamskontak met geaarde of geaarde oppervlaktes, soos pype, verkoelers, reekse en yskaste. Daar is 'n verhoogde risiko van elektriese skok as jou liggaam geaard of geaard is.
• Moenie elektriese gereedskap aan reën of nat toestande blootstel nie. Water wat 'n elektriese gereedskap binnedring, sal die risiko van elektriese skok verhoog.

2.3 Persoonlike veiligheid

• Dra altyd oogbeskerming. Gebruik veiligheidsbril, 'n veiligheidsbril of 'n gesigskerm.
• Dra gehoorbeskerming wanneer u die gereedskap vir lang tye gebruik.
• Trek behoorlik aan. Moenie los klere of juweliersware dra nie. Hou jou hare en klere weg van bewegende dele.
• Bly wakker, kyk wat jy doen en gebruik gesonde verstand wanneer jy 'n elektriese gereedskap gebruik.

2.4 Gereedskapgebruik en -versorging

• Moenie die elektriese gereedskap forseer nie. Gebruik die regte kraggereedskap vir jou toepassing.
• Ontkoppel die batterypak van die kraggereedskap voordat enige aanpassings gemaak word, bykomstighede verander word of kraggereedskap gestoor word.
• Berg ledige elektriese gereedskap buite bereik van kinders en moenie toelaat dat persone wat nie vertroud is met die elektriese gereedskap of hierdie instruksies nie die elektriese gereedskap gebruik nie.
• Onderhou elektriese gereedskap en bykomstighede. Kyk vir wanbelyning of binding van bewegende onderdele, breek van onderdele en enige ander toestand wat die kraggereedskap se werking kan beïnvloed.

2.5 Batterygereedskapgebruik en -versorging

• Herlaai slegs met die laaier wat deur die vervaardiger gespesifiseer word. 'n Herlaaier wat geskik is vir een tipe batterypak kan 'n brandrisiko skep wanneer dit saam met 'n ander batterypak gebruik word.
• Gebruik slegs elektriese gereedskap met spesifiek aangewese batterypakke. Gebruik van enige ander batterypakke kan 'n risiko van besering en brand skep.
• Wanneer die batterypak nie gebruik word nie, hou dit weg van ander metaalvoorwerpe, soos skuifspelde, munte, sleutels, spykers, skroewe of ander klein metaalvoorwerpe, wat 'n verbinding van een terminaal na 'n ander kan maak. Kortsluiting van die batteryklemme saam kan brandwonde of brand veroorsaak.
• Onder beledigende toestande kan vloeistof uit die battery gegooi word; kontak vermy. As kontak per ongeluk voorkom, spoel met water. As vloeistof met die oë in aanraking kom, soek ook mediese hulp. Vloeistof wat uit die battery uitgestoot word, kan irritasie of brandwonde veroorsaak.

3. Komponente ingesluit

Your FLEX 24V Brushless Cordless 1/2-Inch Hammer Drill Kit (FX1271T-2B) includes the following items:

• FLEX 24V Brushless Cordless 1/2-Inch Hammer Drill
• (1) FLEX 24V 2.5Ah Lithium-Ion Battery (FX0111-1)
• (1) FLEX 24V 5.0Ah Lithium-Ion Battery (FX0121-1)
• FLEX 160W Vinnige Lader
• Hulphandvatsel
• Dratas

Figure 2: The FLEX Advantage highlights the included 2.5Ah and 5.0Ah Lithium-Ion batteries, emphasizing their power, runtime, and fast charging capabilities.

4. Opstelling en aanvanklike gebruik

4.1 Laai die battery

1. Connect the 160W Fast Charger to a standard power outlet.
2. Skuif die batterypak op die laaier totdat dit in plek klik.
3. The charger's indicator lights will show the charging status. A fully charged battery will be indicated by a solid green light.
4. Sodra dit ten volle gelaai is, verwyder die battery uit die laaier.

4.2 Die installering van die battery

1. Rig die batterypak met die batterypoort aan die onderkant van die boorhandvatsel.
2. Slide the battery into the port until it locks securely into place. Ensure it is fully seated to prevent accidental dislodgement during operation.
3. Om die battery te verwyder, druk die ontgrendelknoppie(s) aan die kante van die batterypak en skuif dit uit.

4.3 Bevestig die hulphandvatsel

For improved control and safety, especially during high-torque applications or hammer drilling, attach the auxiliary handle.

1. Maak die hulphandvatsel losamp by rotating it counter-clockwise.
2. Slide the handle over the front of the drill body, positioning it to your preferred angle.
3. Draai die clamp by rotating it clockwise until the handle is securely fastened.

Figure 3: The drill with the auxiliary handle attached, providing enhanced control and stability, particularly when the anti-kickback feature engages.

4.4 Installering van Boorpunte of Toebehore

1. Ensure the drill is off and the battery is removed for safety.
2. Grip the rear collar of the 1/2-inch full-metal ratcheting chuck and rotate the front collar counter-clockwise to open the chuck jaws.
3. Steek die boorpunt of bykomstigheid volledig in die klauwplaatkake.
4. Rotate the front collar clockwise to tighten the chuck jaws firmly around the bit. The ratcheting mechanism will provide an audible click when securely tightened.
5. Gently pull on the bit to ensure it is properly secured.

Figure 4: Detail of the 1/2-inch full-metal ratcheting chuck, designed for secure bit retention and durability.

5. Bedryfsinstruksies

5.1 Aan-/afskakeling en spoedbeheer

• Sneller skakelaar: Squeeze the trigger switch to turn the drill on. Release it to turn the drill off.
• Veranderlike spoed: The trigger switch is pressure-sensitive, allowing for variable speed control. Pressing the trigger further increases the speed.
• Vorentoe/Agtertoe-kieser: Located above the trigger, push the selector left for forward rotation (drilling/driving) and right for reverse rotation (removing screws). Center position locks the trigger for safety.

5.2 Gear Selection (2-Speed)

The drill features a 2-speed gearbox for optimal performance across various applications.

• Rat 1 (Lae Spoed, Hoë Wringkrag): Slide the gear selector switch to position '1'. Ideal for driving screws, drilling large holes, or applications requiring maximum torque.
• Rat 2 (Hoë Spoed, Laer Wringkrag): Slide the gear selector switch to position '2'. Suitable for fast drilling of smaller holes in wood or metal.

NOTE: Always ensure the drill is stopped before changing gear settings to prevent damage to the gearbox.

5.3 Mode Selection (Drill, Drive, Hammer Drill)

Rotate the collar behind the chuck to select the desired operating mode:

• Boormodus (Boorikoon): For drilling holes in wood, metal, and plastics.
• Drive Mode (Screw Icon): For driving screws. The clutch settings (numbered ring) allow you to adjust the torque to prevent over-driving screws or damaging materials.
• Hamerboormodus (Hamer-ikoon): For drilling into masonry, brick, and concrete. This mode combines rotary action with a hammering motion.

5.4 Turbo-modus

The Turbo Mode button, located on top of the drill, provides an immediate increase in speed for faster results when needed.

• Druk die TURBO button during operation to engage maximum speed.
• Release the button to return to the previously selected speed setting.

Figure 5: The Turbo Mode button, when pressed, provides increased speed for rapid task completion.

5.5 Anti-Kickback Feature

The drill is equipped with an advanced anti-kickback braking technology. If the drill bit binds during operation, the system will detect the sudden rotational force and rapidly stop the motor to reduce the risk of kickback and potential injury.

5.6 Geïntegreerde LED-lig

An LED light is integrated into the drill to illuminate the work area, improving visibility in dimly lit conditions. The light activates when the trigger is pressed.

Figure 6: The integrated LED light provides illumination for improved visibility in dark work environments.

5.7 Drilling into Masonry (Hammer Drill Mode)

When drilling into masonry, brick, or concrete:

1. Select Hammer Drill Mode.
2. Ensure the auxiliary handle is securely attached and held firmly with both hands.
3. Use appropriate masonry drill bits.
4. Apply steady, firm pressure to the drill, allowing the hammering action to break up the material.

Figure 7: The FLEX hammer drill in action, demonstrating its capability to drill into tough materials with 1,400 in-lbs of torque.

6. Onderhoud

6.1 Skoonmaak

• Ontkoppel altyd die batterypak voordat u enige skoonmaak of onderhoud uitvoer.
• Gebruik 'n sagte borsel of saamgeperste lug om stof en puin uit die ventilasie-openinge skoon te maak.
• Vee die gereedskapbehuising met advertensie afamp lap. Moenie harde chemikalieë of skuur skoonmaakmiddels gebruik nie.
• Hou die klauwplaatkake skoon en vry van puin om behoorlike boorpuntgreep te verseker.

6.2 Berging

• Store the tool, batteries, and charger in a cool, dry place, away from direct sunlight and moisture.
• Ensure batteries are partially charged (not fully depleted or fully charged for long-term storage) before storing.
• Store the tool in its carrying case to protect it from damage.

7. Probleemoplossing

8. Spesifikasies

9. Waarborg en Ondersteuning

9.1 FLEX Limited Lifetime Warranty

This FLEX tool is protected by the FLEX Limited Lifetime Warranty. To qualify for this warranty, you must register your new FLEX tool, battery, or charger within 30 days of purchase through December 31, 2025. Registration can be completed at registreermyFLEX.com.

Please refer to the official FLEX website or your product packaging for full terms and conditions of the warranty.

9.2 Kliëntediens

For technical assistance, replacement parts, or warranty claims, please contact FLEX customer support. Contact information can typically be found on the FLEX official webwebwerf of op u produkverpakking.

When contacting support, please have your model number (FX1271T-2B) and purchase date available.