HyperGear HyperBeam LED Wireless Speaker (Model 15925) User Manual

Inleiding

The HyperGear HyperBeam LED Wireless Speaker (Model 15925) delivers powerful 20W HD stereo sound with dynamic bass and multi-color LED lighting. Designed for versatile audio experiences, it can be used for movies, gaming, and music playback. This manual provides detailed instructions to help you maximize your speaker's performance and features.

Image: The HyperGear HyperBeam LED Wireless Speaker showcasing its multi-color LED lighting.

Wat is in die boks

Verifieer dat alle items in die pakket teenwoordig is:

• HyperGear HyperBeam LED Wireless Speaker
• 6ft USB-C Charging Cable
• 3.5 mm Aux -kabel

Produk Kenmerke

• Powerful 20W HD Sound with Dynamic Bass
• Dual 52mm Full-Range Drivers
• 6-Mode Multicolor LED Lighting
• Built-in Microphone for Hands-Free Calls
• On-board and Wireless Controls
• Lae-Profile Soundbar Design
• Anti-Noise Metal Mesh
• Anti-gly silikoon voete
• Multiple Playback Options: Bluetooth Wireless, Aux-In, USB Drive, microSD Card
• True Wireless Stereo (TWS) Pairing for room-filling sound
• Ingeboude herlaaibare battery

Image: Key physical features and design elements of the HyperBeam speaker.

Opstelling

1. Laai die luidspreker op

1. Koppel die meegeleverde USB-C-laaikabel aan die luidspreker se laaipoort.
2. Koppel die ander kant van die USB-C-kabel aan 'n versoenbare USB-kragadapter (nie ingesluit nie) of 'n rekenaar se USB-poort.
3. Die LED-aanwyser sal die laaistatus wys. 'n Volle lading neem gewoonlik ongeveer 3-4 uur.
4. Sodra dit ten volle gelaai is, ontkoppel die laaikabel.

2. Skakel aan/af

• To power on, press and hold the Power button until the LED lights illuminate and you hear an audible prompt.
• To power off, press and hold the Power button again until the LED lights turn off.

Bedryfsinstruksies

1. Bluetooth-koppeling

1. Maak seker dat die luidspreker aangeskakel en in Bluetooth-paringsmodus is (aangedui deur 'n flikkerende LED-liggie).
2. Aktiveer Bluetooth op jou toestel (slimfoon, tablet, skootrekenaar) en soek vir beskikbare toestelle.
3. Select "HyperBeam" from the list of devices.
4. Once paired, the speaker will indicate a successful connection, and the LED light will change to a steady state.
5. Die luidspreker sal outomaties probeer om weer aan die laaste gekoppelde toestel te koppel wanneer dit aangeskakel word.

2. Aux-In Mode

1. Connect one end of the provided 3.5mm Aux Cable to the speaker's Aux-In port.
2. Verbind die ander punt met die koptelefoonaansluiting van u klanktoestel.
3. Die luidspreker sal outomaties na Aux-In-modus oorskakel.
4. Adjust volume from both your device and the speaker.

3. USB Drive Playback

1. Plaas 'n USB-flash drive wat oudio bevat files into the speaker's USB port.
2. The speaker will automatically detect the USB drive and begin playback.
3. Use the speaker's on-board controls to navigate tracks and adjust volume.

4. microSD Card Playback

1. Plaas 'n microSD-kaart wat oudio bevat files into the speaker's microSD card slot.
2. The speaker will automatically detect the card and begin playback.
3. Use the speaker's on-board controls to navigate tracks and adjust volume.

Image: The rear panel of the HyperBeam speaker illustrating its various connectivity options.

5. LED-beligtingsmodusse

The speaker features 6 distinct multi-color LED lighting modes. Press the LED button (refer to product diagram for exact location) to cycle through the available modes or to turn the lights off.

Image: Visual representation of the speaker's customizable LED lighting with 8 colors and 6 modes.

6. Handvrye oproepe

Wanneer dit via Bluetooth aan 'n slimfoon gekoppel is, maak die ingeboude mikrofoon handvrye oproepe moontlik.

• Beantwoord oproep: Druk die Speel/Pause-knoppie een keer.
• Beëindig oproep: Druk die Speel/Pause-knoppie een keer tydens 'n oproep.
• Verwerp oproep: Druk en hou die Speel/Pause-knoppie in.

7. Ware Draadlose Stereo (TWS) Paring

To achieve room-filling stereo sound, you can pair two HyperBeam LED Wireless Speakers together.

1. Ensure both HyperBeam speakers are powered on and not connected to any Bluetooth device.
2. On one speaker (this will be the primary speaker), press and hold the TWS pairing button (refer to product diagram for exact location) until you hear a prompt indicating TWS pairing mode.
3. Die primêre spreker sal na die sekondêre spreker soek.
4. Once connected, both speakers will indicate a successful TWS connection.
5. Now, connect your device via Bluetooth to the primary speaker as described in the "Bluetooth Pairing" section. Audio will play in stereo through both speakers.

Onderhoud

• Skoonmaak: Gebruik 'n sagte, droë lap om die buitekant van die luidspreker skoon te maak. Moenie skuurmiddels of oplosmiddels gebruik nie.
• Berging: Bêre die luidspreker op 'n koel, droë plek weg van direkte sonlig en uiterste temperature.
• Waterweerstand: Hierdie produk is NIE waterdig. Vermy blootstelling aan water of oormatige vog.
• Batterysorg: Om die batterylewe te verleng, laai die luidspreker volledig voor die eerste gebruik en ten minste een keer elke drie maande indien dit nie gereeld gebruik word nie.

Probleemoplossing

Spesifikasies

Waarborg inligting

This HyperGear product comes with a Beperkte waarborg. For specific details regarding warranty coverage, duration, and claims process, please refer to the warranty card included with your product or visit the official HyperGear webwebwerf.

Bewaar u aankoopbewys as bewys van aankoop vir enige waarborgeise.

Ondersteuning

For further assistance, technical support, or customer service inquiries, please contact HyperGear customer support through their official webwebwerf:

HyperGear Official Webwebwerf: www.hypergear.com

You may also find FAQs and additional resources on their support page.