Ankilo Projection Alarm Clock User Manual

1. Inleiding

Dankie vir die aankoopasing the Ankilo Projection Alarm Clock. This device is designed to provide convenient timekeeping with a unique projection feature, allowing you to view the time on your ceiling or wall. It also includes an alarm, temperature display, and USB charging capabilities. Please read this manual carefully to ensure proper use and maintenance of your new alarm clock.

2. Veiligheidsinligting

• Moenie die toestel blootstel aan uiterste temperature, direkte sonlig of hoë humiditeit nie.
• Hou die toestel weg van water of ander vloeistowwe.
• Moenie probeer om die toestel self uitmekaar te haal of te herstel nie. Verwys alle diens na gekwalifiseerde personeel.
• Use only the provided USB cable for power.
• The CR2032 battery is for backup only; the clock requires continuous USB power for full functionality.

3. Pakketinhoud

• 1 x Ankilo Projection Alarm Clock
• 1 x USB Power Cable (1.5m)
• 1 x CR2032 Memory Battery (pre-installed for backup)
• 1 x Gebruikershandleiding

The image above shows the complete contents included in your Ankilo Projection Alarm Clock package. Please verify all items are present upon unboxing.

4. Produk verbyview

This diagram illustrates the various buttons and ports on your Ankilo Projection Alarm Clock for easy identification and operation.

Komponent Identifikasie

Komponent	Beskrywing
SNOOZE / LIGHT-knoppie	Press to snooze alarm or adjust display brightness.
PROJECT Button	Press to adjust projection brightness.
ALARM-knoppie	Press to set or activate/deactivate alarm.
SET-knoppie	Press to enter time/date setting mode.
UP-knoppie	Increase values during setting, or switch 12/24H format.
AF-knoppie	Decrease values during setting, or switch temperature unit.
Projeksie Lamp	Emits time projection onto surface.
Kragpoort	Connect USB power cable here.
CR2032-batterykompartement	Houses the backup battery.
Spreker	Outputs alarm sound.

5. Opstelling

5.1 Die krag van die toestel

The Ankilo Projection Alarm Clock is primarily powered by a USB cable. Connect the provided USB cable to the power port on the back of the clock and plug the other end into a standard USB power adapter (not included) or a USB port.

Belangrike nota:

• The LED screen will only remain on when the USB power supply is connected.
• The included CR2032 battery serves as a backup to retain time and alarm settings during power outages, but it does not power the display or projection.

5.2 Aanvanklike Tyd- en Datuminstelling

1. Druk en hou die STEL button for 3 seconds to enter time setting mode. The hour digits will start flashing.
2. Gebruik die UP or AF knoppies om die uur aan te pas.
3. Druk STEL druk weer om die uur te bevestig en na die minuutinstelling oor te skakel. Die minuutsyfers sal flikker.
4. Gebruik die UP or AF knoppies om die minuut aan te pas.
5. Druk STEL again to confirm the minute and move to year setting.
6. Repeat the process using UP/AF en STEL om die jaar, maand en dag in te stel.
7. Nadat die dag ingestel is, druk STEL een laaste keer om die instellingsmodus te verlaat.

6. Bedryfsinstruksies

6.1 Stel die alarm in

1. Druk en hou die ALARM knoppie vir 3 sekondes ingedruk. Die alarm se uursyfers sal flikker.
2. Gebruik die UP or AF knoppies om die verlangde alarmuur in te stel.
3. Druk ALARM weer om die uur te bevestig en na die minuutinstelling oor te skakel.
4. Gebruik die UP or AF knoppies om die verlangde alarmminuut in te stel.
5. Druk ALARM weer om die alarmmodus te kies:
• 1-5: Alarm lui Maandag tot Vrydag.
• 1-6: Alarm lui Maandag tot Saterdag.
• 1-7: Alarm sounds Everyday.
6. Druk ALARM een laaste keer om te bevestig en alarminstellingsmodus te verlaat.

The image above illustrates the three available alarm modes: weekdays, weekdays plus Saturday, and every day.

6.2 Snooze -funksie

Wanneer die alarm afgaan, druk die groot knoppie SNOOZE / LIG button on the top of the clock to activate the snooze function. This will provide an additional 5 minutes of sleep before the alarm sounds again. You can repeat this process as needed.

The image highlights the prominent SNOOZE/LIGHT button, easily accessible for quick snooze activation.

6.3 Aanpassing van die skermhelderheid

Druk die SNOOZE / LIG button (short press) to cycle through 4 levels of display brightness: Bright, Medium, Low, and Off. Select the brightness level that best suits your environment.

This image demonstrates the four distinct brightness settings for the main LED display, from bright to completely off.

6.4 Adjusting Projection Brightness and Orientation

Druk die PROJEK button (short press) to cycle through 3 levels of projection brightness: Off, Dim, and Bright. The projection lamp can be rotated 180 degrees to project the time onto your ceiling or wall.

The image illustrates the projection feature, showing the clock projecting time onto a wall and the three available brightness levels for the projection.

Important Projection Orientation: The projection digits are only displayed correctly when the projection direction is towards the back of the alarm clock (away from the front display). If you project forward, the numbers will appear reversed. Ensure the projection is directed appropriately for correct readability.

This image clearly demonstrates the correct and incorrect projection orientations, emphasizing that projection should be directed backward for proper display.

6.5 Nagmodus

The alarm clock features an automatic night mode. By default, the display brightness will automatically dim between 18:00 (6 PM) and 5:59 (5:59 AM). This time range can be adjusted to suit your preferences within the settings menu (refer to the full manual for advanced settings).

The image depicts the alarm clock operating in a low-light environment, showcasing the automatic dimming feature of the night mode.

6.6 12/24-uur-formaat

To switch between 12-hour and 24-hour time formats, short press the UP button during normal time display. The display will toggle between AM/PM indication (12-hour) and military time (24-hour).

This image visually compares the appearance of the time display in both 12-hour and 24-hour formats.

7. Onderhoud

To maintain your Ankilo Projection Alarm Clock, gently wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents, as these may damage the finish or electronic components. Keep the projection lens clean for clear time display.

8. Probleemoplossing

9. Spesifikasies

10. Waarborg en Ondersteuning

• Retourbeleid: Enjoy a 6-month return period from the date of purchase.
• Waarborg: Your Ankilo Projection Alarm Clock is covered by a 24-month warranty against manufacturing defects.
• Lewenslange ondersteuning: Ankilo is committed to providing lifetime technical support for this product.

The image above summarizes our commitment to customer satisfaction, including return policy, warranty, and ongoing support.

For any questions, troubleshooting assistance, or warranty claims, please contact Ankilo customer support through the platform where you purchased the product or visit our official webwebwerf vir kontakinligting.