ErGear Dual Monitor Desk Mount EGCM13B Instruction Manual

Inleiding

Thank you for choosing the ErGear Dual Monitor Desk Mount. This manual provides detailed instructions for the safe and efficient installation, operation, and maintenance of your new monitor mount. Please read this manual thoroughly before installation and keep it for future reference.

Belangrike veiligheidsinligting

Please ensure all instructions are read and understood before assembly and use. If you have any questions, please contact customer service. Failure to follow these instructions may result in property damage, serious injury, or death.

• Verify that your monitor's weight and VESA pattern are within the specified limits.
• Do not exceed the maximum load capacity of 26.5 lbs per arm.
• Ensure the mounting surface (desk) is strong enough to support the combined weight of the mount and monitors.
• Use only the provided hardware.
• Hou klein dele weg van kinders.

Spesifikasies

• Model: EGCM13B
• Skermgrootte verenigbaarheid: 13 tot 34 duim
• Weight Capacity (per arm): Tot 26.5 lbs
• VESA-versoenbaarheid: 75x75 mm, 100x100 mm
• Arm Span: 33 duim
• paal hoogte: 16.3 duim
• Beweging tipe: Tilt, Swivel, Rotation, Articulating
• Maksimum kantelhoek: 90 grade
• Materiaal: Allooi staal
• Kleur: Swart
• Montage tipe: Tafelbladmontering (C-Clamp or Grommet)
• C-Clamp lessenaar dikte: 0.39" - 3.15"
• Grommet Mount Desk Thickness: 0.39" - 2.17"
• Grommet Hole Diameter: 0.47" - 0.79"

Pakketinhoud

Please check that all parts are included and undamaged. If any parts are missing or damaged, please contact customer service.

• Main Pole with Desk Clamp/Grommet Base
• Dubbele monitor arms
• VESA Plates (2x)
• Mounting Hardware (screws, washers, tools)
• Kabelbestuurknipsels
• Instruksie Handleiding

Opstelling en installasie

1. Desk Compatibility Check

Before installation, ensure your desk meets the following criteria:

• Materiaal: Recommended for wooden tables.
• Onderkant: Preferably free of beams or panels that may interfere with installation.
• C-Clamp Dikte: 0.39" - 3.15"
• Grommet Mount Thickness: 0.39" - 2.17" (Hole Diameter: 0.47" - 0.79")

2. Monitor Compatibility Check

Each monitor must meet these conditions:

• Skermgrootte: 13 tot 34 duim
• Gewig: Tot 26.5 lbs
• VESA Monteergate: 75x75 mm or 100x100 mm apart on the back of the monitor.

3. Assemble the Pole with Clamp Ondersteuning

Choose either C-Clamp or Grommet installation based on your desk type.

Follow the detailed steps in the provided video and diagrams to securely attach the main pole to your desk using either the C-Clamp or Grommet method. Ensure all screws are tightened appropriately for stability.

4. Assemble the Arm and Pole Wire Clips

Attach the monitor arms to the main pole. Loosen the screw on the pipe clamp before installing the arm, then tighten it securely. Ensure the VESA plate side of the arm faces upwards. Install the cable management clips along the arms and pole.

5. Assemble VESA Plate and Monitor

Attach the VESA plate to the back of your monitor using the appropriate screws and washers. Ensure it is securely fastened.

6. Install the Monitor to the Swivel Arm

Carefully slide the monitor (with the attached VESA plate) onto the swivel arm. Secure it by tightening the locking screw. Adjust the screw with the Allen key to adjust the height of the VESA panel as needed (clockwise to lower, counter-clockwise to raise).

Bedryf en Aanpassings

The ErGear Dual Monitor Desk Mount offers versatile adjustments for optimal viewtroos:

• Hoogte verstelling: Maak die cl losamp on the main pole to slide the arms up or down to your desired height. Re-tighten the clamp veilig.
• Kantel: Adjust the monitor's vertical angle by tilting it +/-45 degrees to reduce glare and eye strain.
• Draai: Rotate the monitor horizontally +/-90 degrees for easy screen sharing or viewvanuit verskillende hoeke.
• Rotasie: Draai die monitor 360 grade om tussen landskap- en portretoriëntasies te wissel.
• Arm Extension/Retraction: The articulating arms allow you to extend or retract your monitors closer or further from you. Adjust the tension screws on the arm joints as needed to hold the desired position.

Onderhoud

• Kontroleer gereeld alle skroewe en verbindings om te verseker dat hulle styf en stewig bly.
• Clean the mount with a soft, damp lap. Vermy skuur skoonmakers.
• Do not disassemble the mount unless instructed to do so.

Probleemoplossing

• Monitore is nie gelyk nie: Ensure the VESA plates are correctly aligned and tightened. Adjust the small bolts on the tilt head to fine-tune alignment.
• Monitors sag or do not hold position: Tighten the tension screws on the arm joints. Refer to the assembly instructions for specific locations.
• Berg voel onstabiel: Double-check that the C-Clamp or Grommet mount is securely fastened to the desk and all screws are fully tightened. Ensure your desk meets the thickness requirements.

Waarborg en Ondersteuning

For warranty information or technical support, please refer to the product packaging or contact ErGear customer service directly. Keep your purchase receipt as proof of purchase.