Total TG11012556 1100W Angle Grinder User Manual

1. Inleiding

The Total TG11012556 1100 Watt Angle Grinder is a versatile electric power tool designed for grinding, cutting, and polishing various materials. This manual provides essential information for the safe and efficient operation, setup, and maintenance of your angle grinder. Please read these instructions carefully before use and keep them for future reference.

Beeld 1.1: Hoof view of the Total TG11012556 1100W Angle Grinder.

2. Veiligheidsinstruksies

Volg altyd basiese veiligheidsmaatreëls om die risiko van brand, elektriese skok en persoonlike besering te verminder wanneer u elektriese gereedskap gebruik.

2.1 Algemene kraggereedskapveiligheid

• Werksarea veiligheid: Hou jou werkarea skoon en goed belig. Oorvol of donker areas nooi ongelukke uit. Moenie elektriese gereedskap in plofbare atmosfere gebruik nie, soos in die teenwoordigheid van vlambare vloeistowwe, gasse of stof.
• Elektriese veiligheid: Elektriese gereedskapproppe moet by die aansluiting pas. Moet nooit die prop op enige manier verander nie. Moenie die koord misbruik nie. Moet nooit die koord gebruik om die elektriese gereedskap te dra, te trek of uit te trek nie. Hou die koord weg van hitte, olie, skerp kante of bewegende dele.
• Persoonlike veiligheid: Dra altyd gepaste persoonlike beskermende toerusting (PPE), insluitend veiligheidsbril, gehoorbeskerming, handskoene en 'n stofmasker. Trek behoorlik aan; vermy los klere of juweliersware wat in bewegende dele kan vashaak.
• Gereedskap gebruik en versorging: Moenie die kraggereedskap forseer nie. Gebruik die korrekte kraggereedskap vir u toepassing. Ontkoppel die prop van die kragbron voordat u enige aanpassings maak, bykomstighede verander of kraggereedskap bêre.

2.2 Specific Angle Grinder Safety

• Always ensure the guard is correctly positioned and securely fastened before operation.
• Use only discs that are rated for the grinder's speed and size (125mm).
• Hold the tool firmly with both hands, utilizing the auxiliary handle for maximum control.
• Be aware of kickback and how to avoid it. Kickback is a sudden reaction to a pinched or snagged rotating wheel.
• Do not use the grinder for applications for which it is not intended.

3. Pakketinhoud

Verifieer dat alle items teenwoordig is tydens uitpak:

• 1 x Total TG11012556 1100W Angle Grinder
• 1 x 125mm Disc
• 1 x Hulphandvatsel
• 1 x Disc Guard
• 1 x Spanner (for disc changes)
• 1 x Gebruikershandleiding

4. Spesifikasies

Image 4.1: Angle Grinder with approximate dimensions for reference.

5. Opstelling

5.1 Bevestig die hulphandvatsel

1. Maak seker dat die hoekslyper van die kragbron afgekoppel is.
2. The auxiliary handle can be screwed into one of the threaded holes on either side of the gear housing, depending on your preference and working conditions.
3. Tighten the handle securely by hand.

5.2 Installering/Vervanging van die Slypskyf

1. Veiligheid eerste: Always unplug the tool before changing discs.
2. Press and hold the spindle lock button located on the gear housing.
3. Using the provided spanner, loosen the flange nut by turning it counter-clockwise.
4. Verwyder die ou skyf (indien van toepassing) en maak die flense skoon.
5. Place the new 125mm disc onto the inner flange, ensuring it sits flush.
6. Replace the outer flange nut and tighten it clockwise with the spanner while holding the spindle lock button. Do not overtighten.

5.3 Verstelling van die Beskerming

1. The disc guard protects against sparks and debris. Ensure it is securely attached and adjusted to provide maximum protection for your specific task.
2. Maak die wag los clamping screw (if applicable), rotate the guard to the desired position, and then securely tighten the screw.

6. Bedryfsinstruksies

6.1 Aan-/afskakel

1. Connect the angle grinder to a suitable 220-240V power outlet.
2. To start the tool, slide the ON/OFF switch forward. For continuous operation, press the front part of the switch down.
3. To stop the tool, release the switch. If locked on, press the rear part of the switch to release it.

6.2 Veranderlike Spoedbeheer

This model features variable speed control, allowing you to adjust the RPM for different materials and applications. Refer to the speed dial or control mechanism on your tool to select the appropriate speed. Lower speeds are generally used for polishing or working with sensitive materials, while higher speeds are for aggressive grinding and cutting.

6.3 Slyp- en snytegnieke

• Laat die skyf altyd volle spoed bereik voordat dit die werkstuk raak.
• For grinding, hold the tool at a slight angle (15-30 degrees) to the workpiece. Apply moderate pressure and move the tool smoothly across the surface.
• For cutting, hold the tool perpendicular to the workpiece. Make straight, steady cuts without twisting or forcing the disc.
• Avoid applying excessive pressure, as this can damage the disc, reduce tool life, and increase the risk of kickback.

Beeld 6.1: Voorbeeldample of the angle grinder being used for a task.

7. Onderhoud

Gereelde onderhoud verseker optimale werkverrigting en verleng die lewensduur van jou gereedskap.

7.1 Skoonmaak

• Ontkoppel altyd die instrument voor skoonmaak.
• Keep the ventilation openings clear to prevent overheating. Use a soft brush or compressed air to remove dust and debris.
• Moenie water of chemiese skoonmaakmiddels gebruik nie.

7.2 Skyfinspeksie en -vervanging

• Regularly inspect discs for cracks, chips, or excessive wear. Replace damaged or worn discs immediately.
• Ensure replacement discs match the specified diameter (125mm) and are rated for the grinder's speed.

7.3 Berging

Store the angle grinder in a dry, secure place out of reach of children. Protect it from moisture and direct sunlight.

8. Probleemoplossing

If you encounter issues with your angle grinder, refer to the following common problems and solutions:

If the problem persists after attempting these solutions, please contact Total customer support.

9. Waarborg en Ondersteuning

For warranty information, service, or technical support, please refer to the warranty card included with your product or visit the official Total tools webwebwerf. Bewaar u aankoopbewys as bewys van aankoop.