SPI 31-040-9 Digitale Gradeboog PRO3600 Gebruikershandleiding

1. Inleiding

The SPI 31-040-9 Digital Protractor PRO3600 is a revolutionary tool designed to provide immediate digital indications of level, plumb, and angles. It features a light, rigid, and ultra-precise platform, utilizing a state-of-the-art sensor and microprocessor circuit for accurate readings. This instrument is built for durability, precision, and reliability, making it an essential tool for various metalworking and laboratory applications.

Sleutel kenmerke:

• Floating zero provides zero selection anywhere within its 360° range.
• PRO 3600 features SPC output and excellent accuracy.
• Instant LCD Display with resolution of 0.1° up to +/-10°.
• Deviation from the true plane is measurable through full 360° (4x90°).
• Supplied in a protective plastic case.
• Top plate has a V-groove for accurate registration on curved or cylindrical surfaces.

2. Produk verbyview

Familiarize yourself with the main components and controls of your SPI PRO3600 Digital Protractor.

3. Opstelling

3.1 Battery installasie

The SPI PRO3600 is battery powered. To install or replace batteries:

1. Locate the battery compartment cover, typically on the underside or side of the unit.
2. Open the cover using a small screwdriver or coin if necessary.
3. Insert the required batteries (refer to the battery type indicated inside the compartment, usually AAA or button cell) ensuring correct polarity (+/-).
4. Maak die batterykompartement se deksel stewig toe.

3.2 Aanvanklike aanskakeling

After battery installation, press the AAN/AF button to power on the device. The LCD display should illuminate and show a reading.

4. Bedryfsinstruksies

4.1 Krag aan/af

• Om die eenheid te draai ON, druk die AAN/AF knoppie.
• Om die eenheid te draai AF, druk die AAN/AF knoppie weer.
• The unit will automatically shut off after 6 minutes of non-use to conserve battery life.

4.2 Zeroing (ALT ZERO)

The floating zero feature allows you to set a reference point anywhere within the 360° range.

1. Place the unit on your chosen reference surface.
2. Wait approximately 5 seconds for the reading to stabilize.
3. Druk die ALT ZERO button. The display will reset to 0.0°, establishing this as your new reference.
4. To return to the original absolute reference (factory zero), press the ALT ZERO knoppie weer.

4.3 Holding a Reading

Om die huidige lesing op die skerm te vries:

• Druk die HOU button. The displayed reading will be frozen.
• To unfreeze the display and resume live readings, press the HOU knoppie weer.

4.4 SPC Output

The PRO3600 features an SPC (Statistical Process Control) output port. This allows for data transfer to external devices for analysis. Refer to the manual for your specific SPC data collection system for connection and usage instructions.

4.5 Measuring Angles

Place the base of the protractor firmly on the surface you wish to measure. The digital display will show the angle relative to the last set zero point. For absolute measurements, ensure the unit is zeroed on a true horizontal surface.

4.6 Using the V-Groove

The top plate of the protractor features a V-groove. This design allows for accurate registration and measurement on curved or cylindrical surfaces, such as pipes or shafts. Simply align the V-groove with the cylindrical object to obtain a stable and accurate reading.

5. Onderhoud

5.1 Skoonmaak

• Vee die eenheid af met 'n sagte, droë lap.
• Vir hardnekkige vuiligheid, 'n effens damp 'n Lap met sagte seep kan gebruik word, gevolg deur onmiddellike droogmaak.
• Do not use abrasive cleaners, solvents, or immerse the unit in water.

5.2 Berging

• Store the protractor in its supplied plastic case when not in use to protect it from dust, dirt, and physical damage.
• Store in a dry environment, away from extreme temperatures and direct sunlight.
• If storing for extended periods, remove the batteries to prevent leakage.

6. Probleemoplossing

• Eenheid skakel nie aan nie: Kontroleer batteryinstallasie en maak seker dat batterye nie leeg is nie. Vervang indien nodig.
• Onakkurate lesings: Ensure the measurement surface is clean and stable. Perform an ALT ZERO calibration on a known true reference surface.
• Eenheid skakel onverwags af: The unit has an automatic shut-off feature after 6 minutes of non-use. This is normal operation. If it shuts off during active use, check battery levels.
• Vertoning is dof of flikker: Batterye is dalk laag. Vervang hulle.

7. Spesifikasies

8. Waarborg en Ondersteuning

8.1 Waarborginligting

SPI measuring instruments are backed by an industry-leading 2-Year warranty, ensuring their durability, precision, and reliability. Please retain your proof of purchase for warranty claims.

8.2 Kliëntediens

For technical assistance, warranty service, or inquiries regarding your SPI PRO3600 Digital Protractor, please contact SPI customer support through their official webwebwerf of die kleinhandelaar van wie jy die produk gekoop het.