Flama 1317FL Dehumidifier User Manual

1. Belangrike veiligheidsinstruksies

Please read all instructions carefully before using the Flama 1317FL Dehumidifier. Keep this manual for future reference.

• Verseker die kragtoevoer voltage stem ooreen met die graderingsetiket op die toestel.
• Do not operate the dehumidifier with a damaged cord or plug. If damaged, contact qualified service personnel.
• Always place the unit on a firm, level surface to prevent water spillage.
• Handhaaf ten minste 20 cm (8 duim) speling rondom die eenheid vir behoorlike lugvloei.
• Moenie voorwerpe in die luginlaat of -uitlaat steek nie.
• Ontkoppel die eenheid voordat u skoonmaak of enige onderhoud uitvoer.
• Hierdie toestel is slegs vir huishoudelike gebruik.
• Do not use in bathrooms or other excessively humid environments where water contact is possible.
• Hou buite bereik van kinders.

2. Produk verbyview

The Flama 1317FL Dehumidifier is designed to reduce humidity levels in your home, improving air quality and comfort. It features an integrated display for easy monitoring and control, a light indicator, and an automatic shut-off function for safety.

2.1 Komponente

• Main Unit (Dehumidifier)
• Watertenk (2 liter kapasiteit)
• Wasbare lugfilter
• Kragkoord

2.2 Kenmerke

• Geïntegreerde skerm: For clear display of settings and current humidity.
• Lig aanwyser: Provides visual status of operation.
• Verstelbare temperatuur: Allows for customized operation.
• Wasbare filter: Maklik om skoon te maak en te onderhou vir optimale prestasie.
• Outomatiese afskakeling: Unit automatically turns off when the water tank is full or when desired humidity is reached.
• Kompakte ontwerp: Dimensions approximately 39.26 x 37.56 x 40.8 cm.

Figuur 1: Voorkant view of the Flama 1317FL Dehumidifier, showing its compact design and control panel.

3. Opstelling

1. Uitpak: Verwyder die ontvochtiger versigtig uit sy verpakking. Bewaar verpakkingsmateriaal vir toekomstige berging of vervoer.
2. Plasing: Place the unit on a stable, level surface in the room where dehumidification is desired. Ensure there is at least 20 cm (8 inches) of clear space around all sides for adequate air circulation. Do not block the air inlet or outlet.
3. Kragverbinding: Ensure the water tank is correctly inserted. Plug the power cord into a grounded electrical outlet.
4. Aanvanklike gebruik: Allow the unit to stand upright for at least 1 hour before plugging it in if it has been transported horizontally. This allows the refrigerant to settle.

4. Bedryfsinstruksies

4.1 Beheerpaneel

The control panel features an integrated display and various buttons for setting the desired humidity level, fan speed, and timer functions. Refer to the display for current settings and status indicators.

4.2 Skakel aan/af

• Druk die Krag button to turn the unit on. The display will illuminate, and the fan will start.
• Druk die Krag knoppie weer om die eenheid af te skakel.

4.3 Instelling van Gewenste Humiditeit

• Gebruik die Humiditeit button (or up/down arrows) to select your desired humidity level. The display will show the target humidity.
• The unit will operate until the room humidity reaches the set level, then it will cycle on and off to maintain it.

4.4 Water Tank Full Indicator and Automatic Shut-off

When the 2-liter water tank is full, the unit will automatically shut off, and a light indicator (often labeled "Full" or "Tank") will illuminate. Empty the water tank and reinsert it correctly for the unit to resume operation.

1. Carefully pull out the water tank from the front or side of the unit.
2. Gooi die versamelde water in 'n wasbak.
3. Slide the empty water tank back into its position until it clicks securely.
4. The unit will restart automatically if it was in operation mode.

5. Onderhoud

Gereelde onderhoud verseker optimale werkverrigting en verleng die lewensduur van jou ontvochtiger.

5.1 Skoonmaak van die lugfilter

The Flama 1317FL features a washable air filter. Clean the filter every two weeks or more frequently if the unit is used in a dusty environment.

1. Ontkoppel die ontvochtiger van die kragtoevoer.
2. Vind en verwyder die lugfilter (gewoonlik aan die agterkant of kant van die eenheid).
3. Wash the filter gently under running tap water. For heavy dirt, use a mild detergent and rinse thoroughly.
4. Laat die filter heeltemal lugdroog word voordat dit weer in die eenheid geplaas word. Moenie 'n droër of direkte hitte gebruik nie.
5. Plaas die droë filter terug en prop die eenheid weer in.

5.2 Skoonmaak van die buitekant van die eenheid

• Ontkoppel die eenheid voor skoonmaak.
• Vee die buitekant af met 'n sagte, damp lap. Moenie skuurmiddels, oplosmiddels of harde chemikalieë gebruik nie.
• Maak seker dat geen water die interne komponente binnedring nie.

5.3 Berging

Indien die eenheid vir 'n lang tydperk gestoor word:

• Maak die watertenk heeltemal leeg en maak dit skoon.
• Maak die lugfilter skoon.
• Store the unit in an upright position in a cool, dry place, away from direct sunlight.

6. Probleemoplossing

Voordat u kliëntediens kontak, raadpleeg asseblief die volgende probleemoplossingsgids.

7. Spesifikasies

8. Waarborg en Ondersteuning

Information regarding warranty coverage and duration is typically provided with your purchase documentation or on the manufacturer's official webwebwerf. Bewaar asseblief u bewys van aankoop vir waarborgeise.

For technical support, spare parts, or service inquiries, please contact Flama customer service. Contact details can usually be found on the product packaging or the official Flama webwebwerf.

Note: Availability of spare parts and software updates is not specified in the product information provided.