Topaz LED 2' Linear Strip CCT Selectable Instruction Manual

Produk verbyview

The Topaz 2-foot LED Linear Strip Luminaire is designed for versatile lighting applications in commercial facilities. This fixture features a 3-CCT (Correlated Color Temperature) selectable switch, allowing users to choose between 3500K, 4000K, and 5000K to achieve the desired lighting environment. Its design facilitates direct surface mounting and includes press-to-release buttons for tool-less access to the wiring compartment, simplifying installation in various settings such as healthcare facilities, offices, and retail locations. It is suitable for both new construction and remodeling projects.

Belangrike veiligheidsinstruksies

Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards.

• WAARSKUWING: Risiko van elektriese skok. Ontkoppel die krag by die sekering of stroombreker voor installasie of onderhoud.
• Installasie moet deur 'n gekwalifiseerde elektrisiën uitgevoer word in ooreenstemming met alle nasionale en plaaslike elektriese kodes.
• Verseker die toevoer voltage is compatible with the fixture's requirements (120-277V AC).
• Moenie naby hittebronne of in areas met oormatige vog installeer nie.
• Moenie die spanningsvolle toebehore met nat hande hanteer nie.
• Hierdie toestel is slegs bedoel vir binnenshuise gebruik.

Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

• LED Linear Strip Luminaire (1 unit)
• Monteringshardeware (skroewe, ankers)
• Instructiehandleiding (hierdie dokument)

Image: The Topaz LED 2' Linear Strip Luminaire shown with included mounting screws and a mounting plate. The fixture is white with a translucent diffuser, and wiring is visible at one end.

Installasiegids

Follow these steps for proper installation of your LED Linear Strip Luminaire.

Stap 1: Berei voor vir installasie

1. Skakel die krag by die stroombreker of sekeringkas af voordat u begin.
2. Pak die toebehore uit en inspekteer dit vir enige skade.
3. Identify the desired mounting location. Ensure the surface is suitable for supporting the fixture's weight.

Stap 2: Monteer die armatuur

4. Position the fixture against the mounting surface and mark the locations for mounting screws.
5. Boor vlieëniergate indien nodig, en plaas muurankers indien dit in gips gemonteer word.
6. Secure the fixture to the mounting surface using the provided screws. Ensure it is firmly attached.

Stap 3: Bedradingsverbindings

7. Access the wiring compartment by pressing the release buttons on the fixture. This allows tool-less access.
8. Koppel die elektriese drade:
   • Koppel die swart draad van die toebehore na die live/hot wire from the supply.
   • Koppel die wit draad van die toebehore na die neutraal wire from the supply.
   • Koppel die green/ground draad van die toebehore na die grond wire from the supply.
9. Maak seker dat alle verbindings stewig is met behulp van toepaslike draadkonnektors.
10. Carefully tuck all wires into the wiring compartment and close the cover securely.

Step 4: CCT Selection (Before Final Power On)

Before restoring power, select your desired Correlated Color Temperature (CCT) using the integrated dip-switch. This switch is located on the fixture, typically near the wiring compartment.

Beeld: 'n Nabyskoot view of the CCT selectable switch on the side of the LED linear strip. The switch has three positions labeled 3500K, 4000K, and 5000K, allowing the user to choose the color temperature.

• 3500K: Warm Wit
• 4000K: Cool White / Neutral White
• 5000K: Daglig

Slide the switch to your preferred CCT setting. Once set, restore power to the circuit.

Bedryfsinstruksies

Once installed and powered, the Topaz LED Linear Strip Luminaire will operate according to the selected CCT setting. If you wish to change the CCT, you must first disconnect power to the fixture at the circuit breaker, then access the CCT selectable switch as described in Step 4 of the Installation Guide, adjust the setting, and finally restore power.

Onderhoud

The Topaz LED Linear Strip Luminaire requires minimal maintenance.

• Skoonmaak: Maak seker dat die krag afgeskakel is voor skoonmaak. Gebruik 'n sagte, droë of effens droëamp lap om die buitekant van die toebehore af te vee. Moenie skuurmiddels of oplosmiddels gebruik nie.
• Lamp Vervanging: The LED light source is integrated and not user-replaceable. The fixture is designed for a long operational life of 50,000 hours.

Probleemoplossing

If you encounter issues with your LED Linear Strip Luminaire, refer to the following common problems and solutions:

Spesifikasies

Waarborg en Ondersteuning

This Topaz product is backed by a manufacturer's warranty against defects in materials and workmanship. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official Topaz webwebwerf.

For technical support, troubleshooting assistance, or warranty claims, please contact Topaz customer service. Keep your purchase receipt and model number (F-L2/20W/CTS/D-87) readily available when contacting support.

Note: Contact information for Topaz can typically be found on their official webwebwerf of produkverpakking.