Kegland 35L BrewZilla Gen 4 Brewing System Instruction Manual

1. Produk verbyview

The Kegland 35L BrewZilla Gen 4 is an integrated electric brewing system designed for all-grain brewing. It features built-in heating elements, a programmable mash schedule, a recirculation pump, and an onboard control panel for precise temperature management. This system is highly portable and operates on 220V power.

Sleutel kenmerke:

• Gen 4.0 design for enhanced performance.
• Duursame vlekvrye staal konstruksie.
• 9-gallon (35L) total capacity, yielding 5-6 gallons of finished beer.
• Automatic step mashing with up to 6 programmable stages.
• Integrated recirculation pump.
• Water-resistant control panel.
• Removable grain basket.
• Glass lid for visibility during brewing.

2. Veiligheidsinligting

Please read and understand all safety warnings before operating the BrewZilla system. Failure to follow these instructions may result in injury or damage to the unit.

• Elektriese veiligheid: Ensure the unit is connected to a properly grounded 220V power outlet. Do not operate with damaged cords or plugs. Keep electrical components dry.
• Warm oppervlaktes: The BrewZilla unit and its contents will become extremely hot during operation. Always use heat-resistant gloves and exercise caution to prevent burns.
• Stoom: Hot steam will be generated during boiling. Avoid direct contact with steam.
• Vloeistofstortings: Be careful when handling hot liquids. Clean up any spills immediately to prevent slips and falls.
• Kinders en Troeteldiere: Keep children and pets away from the brewing system during operation and cooling.
• Ventilasie: Bedien die eenheid in 'n goed geventileerde area.
• Skoonmaak: Ontkoppel altyd die eenheid en laat dit heeltemal afkoel voordat dit skoongemaak word.

3. Pakketinhoud

Verifieer dat alle komponente teenwoordig en onbeskadig is tydens uitpak:

• BrewZilla 35L Gen 4 Main Unit
• Grain Basket with handle
• Recirculation Arm
• Magnetic Drive Pump (integrated)
• Stainless Steel Immersion Chiller
• Glasdeksel
• Spigot Assembly (ball valve and barb)
• Kragkabel (220V)

4. Opstelling

4.1 Uitpak en inspeksie

Carefully remove all components from the packaging. Inspect the unit and all accessories for any signs of damage. Report any damage to your retailer immediately.

4.2 Komponentidentifikasie

Figuur 1: Intern view of the BrewZilla showing the immersion chiller coil and internal volume markings. The chiller is positioned within the main vessel.

Figuur 2: Kant view of the BrewZilla unit, highlighting the digital control panel and the spigot assembly with a blue handle.

Figuur 3: Onderkant view of the BrewZilla, revealing the integrated magnetic drive pump and associated plumbing and wiring.

Figuur 4: Bo-onder intern view of the BrewZilla, showing the grain basket support bar and the perforated false bottom.

Figuur 5: Gedetailleerd view of the stainless steel spigot assembly, featuring a blue ball valve handle for liquid transfer.

Figuur 6: Close-up of the internal etched volume markings, indicating measurements in both gallons and liters.

Figuur 7: The stainless steel immersion chiller coil, used for rapidly cooling wort after boiling.

4.3 Aanvanklike Montering

1. Installeer Spigot: Attach the spigot assembly to the designated port on the lower side of the main unit. Ensure all connections are tight to prevent leaks.
2. Insert Grain Basket: Place the grain basket into the main unit. Ensure it sits securely on the internal support.
3. Connect Recirculation Arm: Attach the recirculation arm to the pump outlet inside the unit. Position it to spray wort evenly over the grain bed.
4. Position Chiller: If using the immersion chiller, place it inside the main unit. Connect appropriate hoses for water inlet and outlet (hoses not included).
5. Kragverbinding: Connect the 220V power cord to the unit and then to a grounded 220V power outlet.

5. Bedryfsinstruksies

5.1 Beheerpaneel verbyview

The BrewZilla features a water-resistant digital control panel. It includes a display for temperature and program status, and buttons for setting temperature, time, and navigating menus. Refer to the on-screen prompts for specific functions.

5.2 Brewing Process Steps (General)

1. Vul met water: Add the required volume of water to the main unit.
2. Verhit Water: Use the control panel to set the desired mash-in temperature. The heating elements will bring the water to temperature.
3. Mash-In: Once the target temperature is reached, add your crushed grains to the grain basket. Stir to ensure even saturation.
4. Mash: Maintain the mash temperature for the duration specified in your recipe. The automatic step mashing feature can be programmed for multiple temperature rests.
5. Hersirkulasie: Activate the built-in pump to recirculate wort through the grain bed, clarifying the wort and improving mash efficiency.
6. Spoor: After mashing, lift the grain basket and allow it to drain. You may sparge with hot water to rinse additional sugars from the grains.
7. Kook: Remove the grain basket. Bring the wort to a rolling boil. Add hops and other adjuncts according to your recipe.
8. Koue: After the boil, use the immersion chiller to rapidly cool the wort to fermentation temperature.
9. oordra: Once chilled, transfer the wort to your fermenter using the spigot.

5.3 Automatic Step Mashing

The BrewZilla Gen 4 allows you to program up to 6 different temperature steps for your mash. Consult the control panel's menu for instructions on setting target temperatures and hold times for each step. The system will automatically adjust heating to maintain these temperatures and progress through the steps.

5.4 Recirculation Pump Operation

The integrated magnetic drive pump is controlled via the main control panel. It is used to recirculate wort during mashing for improved clarity and efficiency. Ensure the recirculation arm is properly positioned before activating the pump. Do not run the pump dry.

6. Onderhoud en Skoonmaak

Proper cleaning and maintenance will extend the life of your BrewZilla system and ensure consistent brewing results.

6.1 Na elke gebruik

1. Ontkoppel en verkoel: Ontkoppel altyd die eenheid van die kragtoevoer en laat dit heeltemal afkoel voordat u dit skoonmaak.
2. Verwyder vaste stowwe: Discard spent grains from the grain basket. Rinse the grain basket thoroughly.
3. Rinse Main Unit: Rinse the main unit with warm water to remove any large debris.
4. Clean with Brewery Cleaner: Fill the unit with warm water and an appropriate brewery cleaner (e.g., PBW). Run the pump to circulate the cleaning solution through the system, including the spigot and recirculation arm. Allow to soak as per cleaner instructions.
5. Borsel en Skrop: Use a soft brush or sponge to scrub all internal surfaces, heating elements, and the false bottom.
6. Spoel deeglik uit: Drain the cleaning solution and rinse the entire unit multiple times with clean water to remove all cleaner residue.
7. Clean Chiller: Rinse the immersion chiller thoroughly, ensuring no wort residue remains.
8. Droog: Laat alle komponente heeltemal lugdroog word voordat dit weer aanmekaargesit of gestoor word.

6.2 Berging

Store the BrewZilla in a clean, dry environment, away from direct sunlight and extreme temperatures. Ensure all components are completely dry to prevent mold or corrosion.

7. Probleemoplossing

• Eenheid nie verhit nie:
  • Check if the unit is properly plugged into a 220V outlet.
  • Maak seker dat die kragskakelaar aan is.
  • Verify that a temperature is set on the control panel and the heating function is activated.
  • Kontroleer vir enige foutkodes op die skerm.
• Pomp werk nie:
  • Ensure the pump is submerged in liquid; magnetic drive pumps should not run dry.
  • Check for blockages in the pump or recirculation arm.
  • Verify the pump is activated via the control panel.
• Temperature Inaccuracies:
  • Ensure the temperature probe is clean and properly inserted.
  • Stir the wort periodically to ensure even temperature distribution, especially during mashing.
• Leaks from Spigot:
  • Tighten all connections on the spigot assembly.
  • Check for damaged O-rings or seals and replace if necessary.

8. Spesifikasies

• Model: Kegland 35L BrewZilla Gen 4
• Kapasiteit: 35 Liters (9 Gallons) total
• Uitset: Approximately 5-6 gallons of finished beer
• Konstruksie materiaal: Vlekvrye staal
• Krag: 220 V
• Kenmerke: Automatic step mashing (6 stages), integrated pump, glass lid

9. Waarborg en Ondersteuning

For warranty information and technical support, please refer to the documentation provided with your purchase or contact your authorized Kegland retailer. Keep your proof of purchase for warranty claims.