ciciglow M5 LCD Display User Manual

1. Produk verbyview

The ciciglow M5 LCD Display is designed to provide essential information for electric bikes and scooters. It is compatible with 24V, 36V, 48V, and 60V systems, offering a clear and stable interface for monitoring your ride.

Key features include a waterproof design for reliable performance in various weather conditions, and a robust construction ensuring a low failure rate for long-term use.

2. Veiligheidsinligting

• Elektriese veiligheid: Always ensure the power is off before connecting or disconnecting the display. Incorrect wiring can damage the device or your vehicle.
• Waterweerstand: The display features a waterproof design for use in rainy conditions. However, avoid submerging the device in water.
• Installasie: Indien u onseker is oor die installasieproses, word dit aanbeveel om hulp van 'n gekwalifiseerde tegnikus te soek.
• Bedryfstemperatuur: Operate the display within recommended temperature ranges to ensure optimal performance and longevity.

3. Pakketinhoud

Kontroleer asseblief die pakket vir die volgende items:

• 1 x ciciglow M5 LCD E-Bike Computer
• 1 x Gebruikershandleiding (hierdie dokument)

4. Produkkenmerke

• Waterdigte ontwerp: Convenient and practical for use in rainy days without fear of getting wet.
• Stabiel en duursaam: Wires and interfaces are designed to ensure a low failure rate for long-term use.
• Maklike installasie: Features optional mounting apertures of 31.8mm and 22.2mm, making it a suitable accessory for various electric bikes and scooters.
• Kwaliteit materiaal: Constructed from high-grade ABS material, ensuring sturdiness, wear resistance, and a long service life.

5. Spesifikasies

6. Opstelling en installering

6.1 Montering van die skerm

1. Select the appropriate mounting aperture (31.8mm or 22.2mm) for your handlebar.
2. Position the display on your handlebar in a location that provides clear visibility and easy access to the control buttons.
3. Securely fasten the display using the provided mounting hardware. Ensure it is tight enough to prevent rotation during use.

Figure 1: ciciglow M5 LCD Display installed on an electric bicycle handlebar.

6.2 Koppel die kabels

1. Locate the 5-pin connector cable from the M5 LCD Display.
2. Connect this cable to the corresponding port on your electric bike or scooter controller. Ensure the connection is firm and secure.
3. Belangrik: This display uses communication protocol 2. It must be paired with a controller that also supports communication protocol 2 for proper functionality. Incompatibility will prevent the display from working correctly.

Figure 2: M5 LCD Display and control unit, highlighting the wiring connections.

7. Bedryfsinstruksies

7.1 Krag aan/af

To power on the display, press and hold the power button (typically the middle button on the control unit) for a few seconds. To power off, repeat the action.

7.2 Display Readings

The M5 LCD Display provides the following information:

• Spoed: Huidige ryspoed (km/h).
• Energy Bar: Dui die oorblywende batteryvlak aan.
• Cruise: Shows the current cruise control setting or mode.
• Reis: Wys die afstand afgelê vir die huidige reis.

Figuur 3: Close-up view of the M5 LCD Display showing various readouts and control buttons.

7.3 Knoppie Funksies

The control unit typically features three buttons (Up, Down, and Mode/Power). Specific functions may vary slightly based on the controller, but generally:

• Aan / uit-knoppie: Short press to cycle through display modes (e.g., Odometer, Trip Distance, Voltage). Long press to power on/off.
• Up/Plus Button: Short press to increase assistance level or navigate menus.
• Down/Minus Button: Short press to decrease assistance level or navigate menus.

8. Onderhoud

• Skoonmaak: Gebruik 'n sagte, damp cloth to clean the display screen. Avoid using abrasive cleaners or solvents that could damage the screen or casing.
• Verbindingskontrole: Periodically inspect all cable connections to ensure they are secure and free from corrosion or damage.
• Berging: When not in use for extended periods, store the display in a dry, cool place away from direct sunlight.

9. Probleemoplossing

• Skerm skakel nie aan nie:
  • Check if the battery of your electric bike/scooter is charged.
  • Ensure all cable connections, especially the 5-pin connector, are securely attached.
• Incorrect Readings (Speed, Trip):
  • Verify that the display is correctly configured for your wheel size (if applicable, check your controller's manual for settings).
  • Ensure any external speed sensors (if present) are properly installed and functioning.
• Display Not Compatible / No Functionality:
  • The ciciglow M5 LCD Display operates using communication protocol 2. It is essential that your electric bike or scooter controller also uses this specific protocol. If your controller uses a different protocol, the display will not be compatible and will not function. Please verify your controller's communication protocol.

10. Waarborg en Ondersteuning

For warranty information or technical support, please refer to the purchase documentation or contact your retailer. If you have further questions or require assistance with your ciciglow M5 LCD Display, please reach out to the manufacturer's customer service.