Hyperice Hypervolt Heated Head Attachment User Manual

1. Inleiding

The Hyperice Hypervolt Heated Head Attachment is designed to enhance your percussion massage experience. This attachment is compatible with all Hypervolt models and helps to relax tight muscles and maintain range of motion by combining heat with percussion therapy.

Image 1.1: The Hyperice Hypervolt Heated Head Attachment.

2. Veiligheidsinligting

Please read all safety warnings and instructions before using this product. Failure to follow these instructions may result in injury or damage to the device.

• Gebruik slegs soos aangedui.
• Do not use on open wounds or broken skin.
• Consult a physician before use if you have a medical condition or are taking any medications.
• Stop use if you experience pain or discomfort.
• Hou buite bereik van kinders. Hierdie produk is nie bedoel vir gebruik deur kinders nie.
• Moenie gebruik terwyl jy slaap of in die bad nie.
• Ontkoppel die toestel wanneer dit nie gebruik word nie.
• Moenie 'n beskadigde kragkabel of prop gebruik nie.
• Do not submerge in water or expose to rain or wet conditions.
• Do not use with oils, lotions, or creams.
• Do not exceed the recommended massage time without a break.
• This product is not a substitute for professional medical care.

Image 2.1: Regulatory markings on the base of the attachment.

3. Wat is ingesluit

Your Hyperice Hypervolt Heated Head Attachment package includes:

• One (1) Hyperice Hypervolt Heated Head Attachment
• One (1) USB-C Charging Cable

Image 3.1: Contents of the package: Heated Head Attachment and USB-C cable.

4. Opstelling en laai

4.1 Attaching to Your Hypervolt Device

1. Ensure your Hypervolt massager is powered off and compatible with the Heated Head Attachment.
2. Gently push and twist the Heated Head Attachment onto the Hypervolt massager's head slot until securely seated.

Image 4.1: The Heated Head Attachment being connected to a Hypervolt device.

4.2 Charging the Heated Head Attachment

The Heated Head Attachment has an internal battery that powers its heating function. Charge the attachment using the provided USB-C cable.

• Connect the USB-C cable to the charging port on the Heated Head Attachment.
• Koppel die ander kant van die USB-C-kabel aan 'n versoenbare USB-kragadapter (nie ingesluit nie).
• A full charge provides approximately 75 minutes of heated operation.

Image 4.2: The Heated Head Attachment with its USB-C charging cable.

5. Bedryfsinstruksies

Once the Heated Head Attachment is securely attached and charged, you can begin your heated percussion massage.

1. Power on your Hypervolt massager.
2. Press the single button on the Heated Head Attachment to cycle through the three heat levels:
   • Vlak 1: 109°F (43°C)
   • Vlak 2: 115°F (46°C)
   • Vlak 3: 120°F (49°C)
3. Apply the massager with the Heated Head Attachment to your desired muscle group for relaxation, pain relief, and increased blood flow.
4. To turn off the heat, cycle through the heat levels until the indicator lights are off, or power off the Hypervolt device.

Image 5.1: Using the Heated Head Attachment for neck massage.

Image 5.2: Applying the Heated Head Attachment to a thigh muscle.

6. Onderhoud

To ensure the longevity and optimal performance of your Heated Head Attachment, follow these maintenance guidelines:

• Skoonmaak: Vee die aanhangsel met advertensie uitamp cloth after each use. Do not use harsh chemicals or abrasive cleaners. Ensure the device is completely dry before storing or recharging.
• Berging: Store the attachment in a cool, dry place away from direct sunlight and extreme temperatures.
• Batterysorg: Vir die beste batterylewe, vermy om die battery gereeld heeltemal te ontlaai. Laai die toestel gereeld, selfs al word dit nie vir lang tye gebruik nie.

7. Probleemoplossing

If you encounter any issues with your Hyperice Hypervolt Heated Head Attachment, consider the following:

• Geen hitte: Ensure the attachment is fully charged. Verify that the heat setting is activated by pressing the button.
• Attachment Not Secure: Re-attach the head, ensuring it is pushed and twisted firmly into place on your Hypervolt device.
• Laai kwessies: Check the USB-C cable for damage and ensure it is properly connected to both the attachment and a working power source.

For further assistance, please contact Hyperice customer support.

8. Spesifikasies

Beeld 8.1: Gedetailleerd view of the Heated Head Attachment.

9. Waarborg en Ondersteuning

For warranty information and customer support, please visit the official Hyperice webwebwerf of kontak hul kliëntediensafdeling. Bewaar u bewys van aankoop vir waarborgeise.

Vervaardiger: Hyperice

Webwebwerf: www.hyperice.com