Amazon Basics TTIF06A

Amazon Basics Key Finder (Model TTIF06A)

Instruksie Handleiding

Produk verbyview

The Amazon Basics Key Finder (Model TTIF06A) is a convenient system designed to help you locate misplaced items quickly. It includes a remote control and six smart trackers that respond to signals within a 100 ft (30 m) range with an 80dB alarm.

Wat is ingesluit:

  • 1 x Afstandbeheerder (sender)
  • 6 x Smart Trackers (Receivers) with key rings
  • 7 x CR2032 Batteries (pre-installed with insulation tabs)
  • 1 x Remote Control Stand
  • Mounting Tape and Labels
  • 1 x SIM-eject tool (for battery replacement)
Amazon Basics Key Finder components laid out on a white surface, including the remote, six trackers, a stand, batteries, adhesive pads, and a user manual.

Figure 1: All components of the Amazon Basics Key Finder system.

Opstelling

1. Activating the Receivers and Remote:

Before first use, pull out the clear plastic insulation tab from each receiver and the remote control. This activates the pre-installed CR2032 batteries.

2. Attaching Receivers to Items:

  • Using Key Rings: Attach the receivers to keys, pet collars, or other items using the provided key rings.
  • Using Mounting Tape: For items without a loop or hole, use the double-sided adhesive mounting tape. Peel one side of the tape and apply it to the back of the receiver. Ensure not to cover the sound outlet. Peel the other side and attach the receiver to your desired item (e.g., remote control, wallet, phone).

3. Attaching the Remote Control (Transmitter):

The remote control can be placed in its stand or attached to a surface using the provided fastening tape. Apply the black tape fastener to the back of the remote control, then attach the corresponding fastener to your desired surface.

Diagram showing how to attach the key finder components: black tape fastener to remote, black tape fastener to surface, stickers on receivers, and a blank sticker for labeling.

Figure 2: Fastener instructions for attaching the key finder components.

4. Labeling Items (Optional):

Use the blank stickers to write down which item each color-coded receiver is attached to. This helps in quick identification when using the remote control.

Opstel Demonstrasie Video:

Video 1: This video demonstrates the unboxing, attaching the trackers to items, and the basic operation of the Amazon Basics Key Finder.

Operating the Key Finder

Locating a Misplaced Item:

  1. Identify the color-coded button on the remote control that corresponds to the item you wish to locate.
  2. Press the corresponding color button on the remote control.
  3. The receiver attached to your item will respond within 2-3 seconds by emitting an 80dB alarm sound and flashing an LED light.
  4. Follow the sound and flashing light to find your item. The tracking distance is up to 100 ft (30 m).
The Amazon Basics Key Finder remote and several trackers attached to common items like keys, a wallet, and a phone, demonstrating how the system helps secure important belongings.

Figure 3: The key finder in use, showing trackers attached to various items.

Onderhoud

Battery vervanging:

The key finder system uses CR2032 batteries. The remote control and receivers include long-lasting batteries (up to 6 months in standby mode after insulation tab removal).

  • Waarskuwing vir lae battery: A constant "ticking" noise from a receiver with no response from the remote control indicates low battery power.
  • To replace the battery in the remote control or a receiver, push the included SIM-eject tool (or a paper clip) into the small battery eject hole. This will release the battery compartment.
  • Verwyder die ou CR2032-battery versigtig.
  • Install a new CR2032 battery, ensuring the polarity symbols (+/-) on the battery match the symbols in the holder.
  • Push the battery cover back into place until it clicks securely.
Close-up view of the Amazon Basics Key Finder remote control with its battery compartment open, showing a CR2032 coin cell battery inside.

Figure 4: Battery compartment of the remote control, showing a CR2032 battery.

Probleemoplossing

  • Receiver not responding or alarm is weak:
    • Check if the receiver's battery is low. Replace the CR2032 battery if necessary.
    • Ensure the receiver is within the 100 ft (30 m) operating range of the remote control.
    • Verify that the correct color-coded button on the remote control is being pressed for the desired receiver.
    • Ensure there are no significant obstructions (e.g., thick walls, metal objects) between the remote and the receiver that could interfere with the RF signal.
  • Afstandbeheer werk nie:
    • Check the remote control's battery. Replace the CR2032 battery if needed.
    • Ensure the insulation tab was fully removed from the remote control's battery compartment.

Spesifikasies

Produk Dimensies (Sender)3.35 x 1.27 x 0.3 duim (8.5 x 3.2 x 0.76 cm)
Product Dimensions (Receivers)1.42 x 1.42 x 0.3 duim (3.6 x 3.6 x 0.76 cm)
Item gewig2.4 onse (68 gram)
Item ModelnommerTTIF06A
Batterye7 x CR2032 batteries required (included)
VerbindingstegnologieRF (Radiofrekwensie)
BedryfsreeksTot 100 voet (30 m)
AlarmklankvlakUp to 80dB (within 0.4 m)
KleurSwart
MateriaalPlastiek

Waarborg en Ondersteuning

Waarborginligting:

This Amazon Basics product is covered by a limited warranty. For detailed information regarding warranty terms, conditions, and duration, please refer to the official Amazon Basics webwebwerf of die waarborgdokumentasie wat by u aankoop ingesluit is.

Kliëntediens:

For any questions, technical assistance, or support inquiries regarding your Amazon Basics Key Finder, please contact Amazon Customer Service. You can find contact information on the Amazon webwebwerf onder die 'Hulp'- of 'Kliëntediens'-afdelings.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.