Galax Revolution 06 (Rev-06) Mid Tower ATX Gaming Cabinet

Inleiding

Welcome to the instruction manual for your Galax Revolution 06 (Rev-06) Mid Tower ATX Gaming Cabinet. This manual provides essential information for the proper setup, operation, maintenance, and troubleshooting of your new computer case. Please read this manual thoroughly before installation and retain it for future reference.

Beeld: Voorkant view of the Galax Revolution 06 gaming cabinet.

Veiligheidsinligting

• Always disconnect power from the power supply unit (PSU) before installing or servicing any components inside the cabinet.
• Handle tempered glass panels with extreme care to prevent breakage. Avoid impacts or dropping the panel.
• Avoid exposing the cabinet to extreme temperatures, direct sunlight, or high humidity.
• Keep small parts, such as screws and accessories, out of reach of children.
• Ensure proper grounding of your computer system to prevent electrical hazards.

Pakketinhoud

Verifieer asseblief dat alle items in u pakket teenwoordig is:

• Galax Revolution 06 Mid Tower ATX Gaming Cabinet
• 4 Pre-installed RGB Cooling Fans
• Accessory Kit (includes various screws, standoffs, and cable ties)
• Gebruikershandleiding (hierdie dokument)

Produk verbyview

The Galax Revolution 06 is a mid-tower ATX gaming cabinet engineered for optimal airflow and component visibility. It features a mesh front panel for superior cooling performance and a hinged magnetic tempered glass side panel for easy access and a clear view van jou interne komponente.

Sleutel kenmerke:

• Superieure verkoeling: Equipped with 4 pre-installed RGB cooling fans and a mesh front panel to ensure peak airflow.
• Duidelik View: Hinged magnetic tempered glass door provides a crystal-clear view of your PC system's interior.
• Voorpaneelkonnektiwiteit: Includes 1x USB 3.0, 2x USB 2.0, 3.5mm Microphone port, 3.5mm Headphone port, Reset Button, and Power Button.
• Ondersteuning vir vloeibare verkoeling: Versatile radiator mounting options for Front (240mm/280mm/360mm), Top (240mm/280mm), and Rear (120mm).
• Graphics Card Support: Accommodates graphics cards up to 330mm in length.

Voorpaneel I/O-poorte:

Beeld: Gedetailleerd view of the front panel connectivity, including USB 3.0, USB 2.0, microphone, headphone, reset, and power buttons.

Opstelling

1. Voorbereiding van die Saak

• Place the cabinet on a stable, flat surface.
• Gently pull the handle to open the hinged tempered glass side panel.
• Remove any protective films from the glass and other surfaces.

2. Moederbord Installasie

• Identify the correct standoff positions for your motherboard (ATX, Micro-ATX, Mini-ITX).
• Install the necessary standoffs from the accessory kit into the corresponding holes on the motherboard tray.
• Carefully place your motherboard into the cabinet, aligning it with the installed standoffs and the rear I/O shield opening.
• Secure the motherboard with screws provided in the accessory kit.

Image: Empty internal view of the case, illustrating motherboard mounting points and cable routing options.

3. Installasie van die kragtoevoereenheid (PSU)

• Install the PSU into its designated compartment at the bottom rear of the cabinet.
• Secure the PSU with screws from the rear of the cabinet.

4. Grafiese kaart (GPU) Installasie

• Remove the necessary PCIe slot covers from the rear of the cabinet.
• Insert your graphics card into the appropriate PCIe slot on the motherboard.
• Secure the GPU with screws. The cabinet supports GPUs up to 330mm in length.

5. Installasie van stoorskyf

• Install 2.5-inch SSDs or 3.5-inch HDDs into the available drive bays. Refer to the cabinet's internal layout for specific mounting points and methods.

6. Kabelbestuur

• Utilize the cable routing holes and tie-down points behind the motherboard tray to manage cables neatly. This practice improves airflow and enhances the aesthetic appeal of your build.

Beeld: Bvample of internal component installation and organized cable routing within the cabinet.

7. Fan and Radiator Installation (Optional)

• The cabinet comes with 4 pre-installed RGB fans. Additional fans or liquid cooling radiators can be installed in the following locations:
• Voor: Supports 240mm, 280mm, or 360mm radiators.
• Top: Supports 240mm or 280mm radiators.
• Agter: Supports a 120mm radiator.

Bedryf

• Once all internal components are installed and cables are securely connected, close the tempered glass side panel.
• Connect your monitor, keyboard, mouse, and other peripherals to your system.
• Connect the power cable to the power supply unit (PSU) and then to a wall outlet.
• Press the power button located on the front panel of the cabinet to start your system.
• The pre-installed RGB fans will illuminate upon power-on, providing visual effects and cooling.

Onderhoud

Stoffilter skoonmaak

• The cabinet features a magnetic dust filter on the top panel. Regularly remove and clean this filter to maintain optimal airflow and prevent dust buildup inside the system.
• To clean, simply lift the magnetic filter, gently brush off accumulated dust, or rinse with water if necessary. Ensure it is completely dry before reattaching.

Tempered Glass Care

• Maak die geharde glaspaneel skoon met 'n sagte, pluisvrye lap en 'n nie-skurende glasreiniger.
• Avoid using harsh chemicals, abrasive materials, or excessive force, as these can scratch or damage the glass.

Algemene skoonmaak

• Periodically use compressed air to remove dust from internal components, fan blades, and mesh panels to ensure efficient cooling.

Probleemoplossing

Stelsel skakel nie aan nie

• Check all power connections: ensure the PSU is connected to the wall outlet, the 24-pin ATX power cable and 8-pin CPU power cable are securely connected to the motherboard, and the front panel power switch cable is correctly connected to the motherboard's front panel header.
• Verify that the power switch on the back of the PSU is in the "ON" (I) position.

Waaiers draai nie / RGB lig nie op nie

• Ensure that all fan power cables and RGB cables are correctly connected to the motherboard or any included fan/RGB controller.
• Kyk vir los verbindings.

Geen skermuitset nie

• Confirm that your monitor is connected to the graphics card (or motherboard integrated graphics, if applicable) and is powered on.
• Reseat the graphics card and RAM modules to ensure they are properly seated in their slots.

For further assistance, refer to your motherboard manual or contact Galax support.

Spesifikasies

Image: Dimensions and internal layout diagram with key specifications.

Waarborg en Ondersteuning

Waarborg inligting

This Galax Revolution 06 Gaming Cabinet comes with a 1 jaar waarborg from the date of purchase. Please retain your proof of purchase for all warranty claims. The warranty covers manufacturing defects under normal use. Damage resulting from improper installation, misuse, unauthorized modifications, or accidents is not covered.

Vervaardiger besonderhede

Vervaardiger: Galaxy Microsystems Ltd., Hong Kong, Kowloon Bay, Wang Chiu Rd, 33, Exchange Tower, Room 1601, 16th Floor.

Invoerder (Indië): Technology And Gadgets, Gala no.142/143, 1st Floor, Building no.6, Mittal Industrial Estate, Marol, Andheri (East), Mumbai - 400059., Mumbai, India, Maharashtra.

Tegniese Ondersteuning

For technical support, warranty inquiries, or further assistance, please contact your local retailer or refer to the official Galax support channels available on their webwebwerf.