CONTEC CMS50Q1 Fingertip Pulse Oximeter User Manual

1. Inleiding

The CONTEC CMS50Q1 Fingertip Pulse Oximeter is a portable, non-invasive device designed for spot-checking of oxygen saturation (SpO2) and pulse rate (PR) through the finger. It is specifically designed for individuals with small fingers, such as children, and is suitable for sports and aviation use. This device is not intended for medical diagnosis or treatment.

Important Note: This device is for Sports or Aviation use only and is not a medical device. Consult a healthcare professional for any medical concerns.

2. Produk verbyview

2.1 Sleutelkenmerke

• Small Finger Design: Specifically designed to fit finger diameters greater than 0.2 inch (5mm), making it suitable for children.
• Accurate & Fast Results: Provides quick and precise measurements of SpO2 and pulse rate.
• Vee skerm uit: Features a digital rotatable TFT display showing SpO2 value, pulse rate value, bar graph, and pulse waveform.
• Maklike werking: Simple one-button operation for power on and measurement.
• Gerieflike ontwerp: Fingertip clip made with silica gel material for comfort.
• Lang batterylewe: Offers 20-30 hours of battery life with automatic power-off after 5 seconds of inactivity.

2.2 Wat is in die boks

• CONTEC CMS50Q1 Pulse Oximeter (Main Unit)
• Lanyard
• Gebruikershandleiding
• Cartoon Stickers
• Skroewedraaier (vir batterykompartement)

2.3 Produkkomponente

This image illustrates the various parts of the CMS50Q1 Pulse Oximeter, including the display elements and physical features like the lanyard loop hole and battery cover.

3. Opstelling

3.1 Battery installasie

1. Locate the battery compartment on the back of the oximeter.
2. Use the provided screwdriver to loosen the screw on the battery cover.
3. Skuif die batterydeksel af.
4. Insert two AAA batteries (not included) into the compartment, ensuring correct polarity (+/-).
5. Replace the battery cover and secure it with the screw using the screwdriver. This screw helps prevent accidental battery access, especially for children.

This image demonstrates the battery installation process and subsequent steps for taking a measurement.

3.2 Bevestig die koord

Thread the thin loop of the lanyard through the lanyard loop hole on the oximeter. Then, pass the larger part of the lanyard through the thin loop and pull gently to secure it. This allows for convenient carrying.

This image shows the device dimensions and how to attach the included lanyard.

4. Bedryfsinstruksies

4.1 Neem 'n meting

1. Ensure the oximeter has batteries installed.
2. Open the clip of the oximeter.
3. Insert one of your fingers (preferably the index finger) into the rubber opening of the oximeter, ensuring the finger is placed correctly and fully inside. The device is designed for finger diameters greater than 0.2 inch (5mm).
4. Press the power button once to turn on the oximeter.
5. Keep your hand still and avoid movement during the measurement.
6. The SpO2 and pulse rate readings will appear on the display within a few seconds.

4.2 Skermoriëntasie

The display of the CMS50Q1 Pulse Oximeter can rotate automatically to provide optimal viewing from different angles. Simply adjust the device's orientation, and the display will adapt.

This image demonstrates the rotatable display feature of the oximeter.

4.3 Outomatiese afskakeling

The device will automatically power off after approximately 5 seconds of inactivity (when no finger is detected) to conserve battery life.

5. Vertoon inligting

The TFT display provides the following information:

• SpO2 (%): Blood Oxygen Saturation level.
• PRbpm: Pulse Rate in beats per minute.
• Staafgrafiek: A visual representation of pulse strength.
• Pulse Waveform: A graphical representation of the pulse.
• Lae battery aanwyser: An icon indicating when batteries need replacement.

This image shows a typical display reading with SpO2, PRbpm, and the pulse waveform.

6. Onderhoud en versorging

6.1 Cleaning the Oximeter

• Clean the surface of the oximeter before and after each use with a soft cloth dampened with medical alcohol (70% ethanol or isopropanol).
• Do not immerse the device in water or other cleaning solutions.
• Ensure the device is completely dry before reuse.

6.2 Batteryvervanging

When the low battery indicator appears on the display, replace the batteries promptly. Follow the battery installation steps in Section 3.1.

6.3 Berging

Store the oximeter in a cool, dry place away from direct sunlight, extreme temperatures, and humidity. If the device will not be used for an extended period, remove the batteries to prevent leakage.

7. Probleemoplossing

8. Spesifikasies

• Produk afmetings: 2.32 x 1.42 x 1.38 duim
• Item gewig: 3.52 onse
• Measuring Range SpO2: 70-100%
• Measuring Range Pulse Rate: 0-250 bpm
• Batterylewe: Ongeveer 20-30 uur
• Kragbron: 2 x AAA-batterye (nie ingesluit nie)
• Outomatiese afskakeling: Na 5 sekondes van onaktiwiteit
• Vervaardiger: Contec Medical Systems Co.,Ltd

9. Veiligheidsinligting

• This device is intended for sports and aviation use only. It is not a medical device and should not be used for medical diagnosis or treatment.
• Do not use the oximeter during sports activities, as movement can affect accuracy.
• Keep the device out of reach of small children to prevent choking hazards from small parts like batteries or the lanyard.
• Avoid exposing the device to direct sunlight, high temperatures, or moisture.
• Moenie probeer om die toestel self te herstel of te wysig nie. Kontak ondersteuning indien probleme ontstaan.

10. Ondersteuningsinligting

For technical support or inquiries regarding your CONTEC CMS50Q1 Pulse Oximeter, please contact the manufacturer using the details below:

• Tegniese Ondersteuning Telefoon: +86-335-8015431
• E-pos: contecmed@contecmed.com.cn
• Webwebwerf: http://www.contecmed.com

Please refer to the official CONTEC webwebwerf of u aankoopdokumentasie vir spesifieke waarborgbepalings en -voorwaardes.