Technaxx TX-219 4-in-1 Multifunksionele Aansitter, Lugkompressor, Kragbank en LED-lig Gebruikershandleiding

1. Inleiding

This manual provides detailed instructions for the safe and effective use of your Technaxx TX-219 4-in-1 Multifunction Device. This versatile unit combines a jump starter, an air compressor, a power bank, and an LED light, designed for automotive and portable power needs. Please read this manual thoroughly before operation and retain it for future reference.

2. Veiligheidsinstruksies

Always observe the following safety precautions to prevent injury or damage to the device or vehicle:

• Lees alle instruksies voor gebruik.
• Hou buite bereik van kinders.
• Wear eye protection when operating the jump starter.
• Moenie die toestel aan reën of vog blootstel nie.
• Do not operate if the device or cables are damaged.
• Verseker behoorlike ventilasie tydens gebruik.
• Koppel die aansitter clamps correctly: positive to positive, negative to negative. Avoid short-circuiting.
• Moenie probeer om 'n gevriesde battery te spring nie.
• Disconnect the jump starter from the vehicle battery within 30 seconds after the engine starts.
• Do not use the air compressor continuously for more than 10 minutes to prevent overheating. Allow it to cool down.
• Berg die toestel op 'n koel, droë plek wanneer dit nie gebruik word nie.

3. Pakketinhoud

Verifieer dat alle items in die pakket teenwoordig is:

• Technaxx Jump Starter TX-219 Unit
• Adapter Cable with Battery Clamps
• AC Adapter
• Compressed Air Hose
• USB kabel
• Motor adapter kabel
• Gebruikershandleiding

Figuur 3.1: verbyview of the Technaxx TX-219 package contents, showing the main unit, battery clamps, various charging cables, and the air hose.

4. Produk verbyview

Familiarize yourself with the components of your Technaxx TX-219 device.

Figuur 4.1: Hoekig view of the Technaxx TX-219 unit, showing the digital display, control buttons, USB ports, and LED light.

Figuur 4.2: Top view of the device, highlighting the power switch and the digital display for pressure readings.

Figuur 4.3: Voorkant view of the device, showing the digital display, pressure adjustment buttons, and the power indicator lights.

Sleutelkomponente:

• Digitale skerm: Shows air pressure for the compressor and battery status.
• Beheerknoppies: For adjusting pressure settings and operating the device.
• USB-A Output Ports (5V/1A, 5V/2A): Vir die laai van eksterne elektroniese toestelle.
• 15V/0.4A Input Port: For charging the internal battery of the TX-219.
• Jump Start Output Port: Connects to the battery clamp kabel.
• LED lig: Verskaf beligting.
• Krag skakelaar: On/Off control for the device.
• Lugslangverbinding: For the air compressor function.

5. Setup and Charging the Device

Before first use, fully charge the Technaxx TX-219 unit. It is recommended to recharge the device every 3 months to maintain battery health.

1. Connect the AC adapter to the 15V/0.4A input port on the TX-219.
2. Prop die AC-adapter in 'n standaard muuraansluiting.
3. The battery indicator lights on the device will illuminate to show charging progress. All lights will be solid when fully charged.
4. Alternatively, use the car adapter cable to charge the device from a vehicle's 12V accessory socket.

Figuur 5.1: The Technaxx TX-219 unit being charged or used as a power bank to charge a smartphone.

6. Bedryfsinstruksies

6.1. Aansit van 'n Voertuig

The TX-219 can jump start gasoline engines up to 4.0L and diesel engines up to 3.0L.

1. Ensure the TX-219 is sufficiently charged (at least 75% battery indicated).
2. Turn off the vehicle's ignition and all accessories.
3. Koppel die rooi (+) clamp na die positiewe (+) terminaal van die voertuig se battery.
4. Koppel die swart (-) clamp na 'n skoon, ongeverfde metaaldeel van die voertuig se enjinblok of onderstel, weg van die battery. Do not connect to the negative (-) battery terminal directly unless specified by vehicle manufacturer.
5. Connect the adapter cable to the jump start output port on the TX-219.
6. Begin die voertuig se enjin. Indien dit nie onmiddellik begin nie, wag 30 sekondes voordat jy weer probeer. Moenie langer as 3 sekondes per poging laat draai nie.
7. Once the engine starts, immediately disconnect the adapter cable from the TX-219.
8. Then, disconnect the black (-) clamp, gevolg deur die rooi (+) clamp van die voertuigbattery af.

Figuur 6.1: The Technaxx TX-219 connected to a vehicle battery using the provided clamps for jump starting.

Figuur 6.2: A close-up of the jump starter connected to a car battery, illustrating the process of jump starting.

6.2. Using the Air Compressor

The integrated air compressor can inflate tires up to 3.5 Bar (approximately 50 PSI) and features an automatic shut-off.

1. Connect the compressed air hose to the air hose connection port on the TX-219.
2. Attach the other end of the hose to the tire valve.
3. Turn on the TX-219. The digital display will show the current tire pressure.
4. Use the '+' and '-' buttons to set the desired pressure. The display supports Bar, KPA, kg/cm², and PSI units.
5. Press the compressor start button to begin inflation.
6. Die kompressor sal outomaties stop sodra die vooraf ingestelde druk bereik word.
7. Disconnect the air hose from the tire valve and the TX-219.

Figuur 6.3: The Technaxx TX-219 being used to inflate a car tire, demonstrating the air compressor function.

Figuur 6.4: A user inflating a tire with the TX-219, showing the digital display and the air hose connection.

6.3. Gebruik as 'n kragbank

The 14000 mAh battery can charge various USB-powered devices.

1. Connect your device's USB charging cable to one of the USB-A output ports (5V/1A or 5V/2A) on the TX-219.
2. The TX-219 will automatically begin charging your device.
3. Monitor your device's charging status. Disconnect once fully charged.

Figuur 6.5: The Technaxx TX-219 connected to a smartphone via USB, illustrating its power bank functionality.

Figuur 6.6: The TX-219 acting as a portable power bank, charging a mobile device.

6.4. Gebruik van die LED-lig

The integrated LED light can be used for illumination in dark environments.

• Locate the LED light button on the device.
• Druk die knoppie een keer om die LED-lig aan te skakel.
• Press again to cycle through different light modes (e.g., steady, strobe, SOS, if available).
• Press and hold the button to turn off the LED light.

Figuur 6.7: The TX-219's LED light providing illumination in a vehicle's engine compartment.

7. Spesifikasies

8. Onderhoud

• Skoonmaak: Vee die toestel af met 'n sagte, droë lap. Moenie harde chemikalieë of skuurmiddels gebruik nie.
• Berging: Store the TX-219 in a cool, dry place, away from direct sunlight and extreme temperatures.
• Herlaai: Recharge the unit every three months, even if not in use, to prolong battery life.
• Kabel inspeksie: Regularly inspect all cables and clamps for any signs of damage, wear, or corrosion. Replace if necessary.

9. Probleemoplossing

10. Waarborg en Ondersteuning

For warranty information and technical support, please refer to the warranty card included with your product or visit the official Technaxx webwebwerf. Bewaar u aankoopbewys as bewys van aankoop.

Vervaardiger: Technaxx

Modelnommer: 5031