Vitalograph COPD-6 Screener BT User Manual

1. Inleiding

This manual provides essential information for the safe and effective operation of the Vitalograph COPD-6 Screener BT. The Vitalograph COPD-6 is an electronic COPD screening device designed to ascertain the obstruction index and the FEV1/FEV6 ratio, thereby assisting in the detection of potential COPD diseases. It identifies individuals at risk of COPD at the pre-symptomatic stage and screens out those whose FEV1 is normal.

Lees asseblief hierdie handleiding deeglik deur voordat u die toestel gebruik en bewaar dit vir toekomstige verwysing.

Beeld 1: Voorkant view of the Vitalograph COPD-6 Screener BT device.

2. Belangrike veiligheidsinligting

Always adhere to the following safety precautions to ensure proper operation and prevent injury or damage to the device.

• Gebruik die toestel slegs soos beskryf in hierdie handleiding.
• Moenie die toestel in water of ander vloeistowwe dompel nie.
• Hou die toestel weg van uiterste temperature en direkte sonlig.
• Moenie probeer om die toestel oop te maak of te herstel nie. Verwys alle diens na gekwalifiseerde personeel.
• Maak seker dat batterye korrek volgens die polariteitsmerkies geplaas word.
• Gooi batterye en die toestel weg volgens plaaslike regulasies.
• This device is intended for screening purposes and should not replace a full medical diagnosis.

3. Toestelkomponente

Familiarize yourself with the main parts of your Vitalograph COPD-6 Screener BT.

Beeld 2: Bo-na-onder view showing the mouthpiece and display.

Beeld 3: Sykant view of the device, highlighting its ergonomic design.

Image 4: Device with a disposable mouthpiece attached for use.

Image 5: Device with a larger, alternative mouthpiece attached.

• Mondstuk: Where the user exhales.
• Vertoon skerm: Shows readings, indicators, and menu options.
• Beheerknoppies: Vir navigasie en seleksie.
• Bluetooth-aanwyser: Toon verbindingstatus.
• Battery kompartement: Located on the back (not shown in images, but implied).

4. Opstelling

4.1. Battery Installasie

1. Vind die batterykompartement aan die agterkant van die toestel.
2. Maak die kompartement se deksel oop.
3. Plaas 2 AAA-batterye in en maak seker dat die polariteit (+/-) korrek is soos aangedui in die kompartement.
4. Maak die batterykompartement se deksel stewig toe.

4.2. Attaching the Mouthpiece

1. Select a clean, disposable mouthpiece.
2. Align the mouthpiece with the opening on the device.
3. Gently push the mouthpiece onto the device until it is firmly seated.

4.3. Aanvanklike aanskakeling en Bluetooth-paring

1. Druk die kragknoppie om die toestel aan te skakel.
2. The device will display initial setup options or be ready for use.
3. To pair with a computer or mobile device, ensure Bluetooth is enabled on both the COPD-6 Screener BT and the receiving device.
4. Open the Vitalograph Reports Software (included) on your computer or the Vitalograph app on your mobile device.
5. Follow the on-screen instructions within the software/app to complete the pairing process. The Bluetooth indicator on the COPD-6 will confirm successful connection.

5. Bedryfsinstruksies

5.1. Doen 'n toets

1. Ensure the device is powered on and a clean mouthpiece is attached.
2. Sit upright and relax.
3. Take a deep breath, filling your lungs completely.
4. Place your lips tightly around the mouthpiece, ensuring no air leaks.
5. Exhale as hard and as fast as you can, emptying your lungs completely. Continue exhaling for at least 6 seconds.
6. The device will display the FEV1, FEV6, ratio, percent predicted, obstructive index, COPD classification, and lung age.
7. Repeat the test as necessary, typically three times, to ensure consistent and accurate readings.

5.2. Interpretasie van resultate

The device displays key spirometry parameters. The GOLD COPD classification (Stage I – IV) is shown to help recognize the need for a change in the patient’s management plan. Results are automatically sent to the paired software/app after each blow for detailed reporting and analysis.

• FEV1: Forced Expiratory Volume in 1 second.
• FEV6: Forced Expiratory Volume in 6 seconds.
• FEV1/FEV6 Ratio: An important indicator for COPD screening.
• Obstructive Index: Based on a percentage of predicted values.
• Lung Age: An estimate of lung health compared to chronological age.

6. Onderhoud en versorging

6.1. Maak die toestel skoon

• Vee die buitekant van die toestel af met 'n sagte, damp lap.
• Moenie skuurmiddels gebruik of die toestel in water dompel nie.
• The mouthpiece should be disposable and replaced for each user to maintain hygiene.

6.2. Battery vervanging

When the battery indicator appears on the display, replace the batteries as described in the "Battery Installation" section (4.1). Always use new AAA alkaline batteries.

6.3. Berging

Store the device in its carry pouch in a cool, dry place, away from direct sunlight and extreme temperatures.

7. Probleemoplossing

8. Spesifikasies

9. Waarborg en Ondersteuning

9.1. Waarborginligting

Vitalograph products are manufactured to high standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Vitalograph webwebwerf.

9.2. Kliëntediens

For technical assistance, troubleshooting not covered in this manual, or service inquiries, please contact Vitalograph customer support. Contact details can typically be found on the Vitalograph webwebwerf of op die produkverpakking.

Webwebwerf: www.vitalograph.co.uk