Armacost Lighting 263412

Armacost Lighting PureVue Dimmable LED Undercabinet Puck Light User Manual

Model: 263412 | Brand: Armacost Lighting

1. Produk verbyview

The Armacost Lighting PureVue Dimmable LED Undercabinet Puck Light (Model 263412) is designed for efficient and versatile undercabinet lighting. These RGB+W (Red, Green, Blue + White) LED puck lights offer a wide spectrum of colors and a pure 3000K white light, making them suitable for various indoor applications such as kitchens, bathrooms, bedrooms, living rooms, and dining rooms.

Featuring an ultra-thin design, these puck lights can be either surface-mounted or recessed for a seamless look. Proprietary PureVue diffusion technology minimizes visible LED reflections on countertops, ensuring a clean and uniform light output. They are energy-efficient, consuming approximately 4.4 watts per puck light, and are UL Listed for safety.

White Armacost Lighting PureVue LED Puck Light

Beeld 1.1: Voorkant view of the Armacost Lighting PureVue Dimmable LED Undercabinet Puck Light in white.

Armacost Lighting PureVue LED Puck Light with RGB+W and 24 Volt indicators

Image 1.2: The PureVue puck light highlighting its RGB+W color capabilities and 24-volt power requirement.

2. Veiligheidsinligting

  • Lees alle instruksies voor installasie en gebruik.
  • Hierdie produk is ontwerp vir slegs binnenshuise gebruikMoenie aan water of hoë humiditeit blootstel nie.
  • Maak seker dat die krag afgeskakel is voor installasie of onderhoud.
  • Use only with a compatible 24-volt DC power supply and an Armacost Lighting RGB+W LED controller (sold separately).
  • Do not attempt to modify or disassemble the puck light. This will void the warranty and may cause damage or injury.
  • Hou buite bereik van kinders.
  • Hierdie produk is nie waterbestand nie.

3. Pakketinhoud

Each Armacost Lighting PureVue Dimmable LED Undercabinet Puck Light package includes:

  • 1 x PureVue Dimmable LED Puck Light
  • 1 x Removable Trim Ring (for surface mounting)
  • 1 x 36-inch wire lead

Let wel: A 24-volt power supply and an Armacost Lighting RGB+W LED Controller are required for operation and are sold separately.

Armacost Lighting PureVue Puck Light with power supply and remote controller

Image 3.1: The PureVue puck light shown with a separate power supply and RGB+W LED controller, which are required for full functionality.

4. Spesifikasies

KenmerkSpesifikasie
Modelnommer263412
LigbrontipeLED
Ligte KleurRGB+wit (3000K)
Helderheid115 Lumen
Wattage4.4 Watts (per puck)
Voltage12 Volts DC (Requires 24V DC Power Supply)
Afmetings (L x B x H)2.75" x 2.75" x 0.75"
Straalhoek120°
MateriaalPlastic, Metal (Rugged aluminum housing)
Installasie tipeUndercabinet (Surface or Recess Mount)
Binne/buiteluggebruikSlegs binnenshuis
Spesiale kenmerkeEnergy Efficient, Dimmable, Color Changing, Low Voltage
SertifiseringsUL gelys
Gewig3.2 onse
Dimensions of Armacost Lighting PureVue LED Puck Light

Image 4.1: Detailed dimensions and beam angle of the PureVue puck light.

5. Installasie (Opstelling)

The PureVue LED Puck Lights can be installed using either surface mount or recess mount methods. Ensure you have a compatible 24-volt DC power supply and an Armacost Lighting RGB+W LED controller before beginning installation.

5.1. Surface Mount Installation

  1. Identify the desired location for the puck light under your cabinet.
  2. Secure the removable trim ring to the mounting surface using appropriate screws (not included).
  3. Route the 36-inch wire lead from the puck light to your power supply and controller.
  4. Snap the puck light into the secured trim ring.
  5. Connect the wire lead to your 24-volt DC power supply and Armacost Lighting RGB+W LED controller, following their respective installation instructions.

5.2. Recess Mount Installation

  1. Identify the desired location for the puck light. Ensure there is sufficient clearance behind the mounting surface for the puck light body.
  2. Carefully remove the trim ring from the puck light by gently twisting or prying it off.
  3. Cut a circular hole in the mounting surface that matches the diameter of the puck light body (approximately 2.25 inches).
  4. Route the 36-inch wire lead through the hole.
  5. Insert the puck light into the hole until it sits flush with the surface. The spring clips on the side of the puck light will hold it in place.
  6. Connect the wire lead to your 24-volt DC power supply and Armacost Lighting RGB+W LED controller, following their respective installation instructions.
Diagram showing surface and recess mounting options for the puck light

Image 5.1: Illustration of how to achieve surface or recess mounting by removing the trim ring.

Belangrik: Ensure all electrical connections are secure and comply with local electrical codes. If unsure, consult a qualified electrician.

6. Operasie

The Armacost Lighting PureVue RGB+W LED Puck Light requires an Armacost Lighting RGB+W LED controller (sold separately) for full functionality, including color selection and dimming. This controller typically operates via remote control.

  1. Krag aan/af: Use the power button on your Armacost Lighting RGB+W LED controller to turn the lights on or off.
  2. Kleurkeuse: Use the color selection buttons on your controller to choose from a wide range of RGB colors.
  3. Wit lig: Select the dedicated white light button to activate the pure 3000K white light.
  4. verduistering: Use the dimmer controls on your controller to adjust the brightness from 0-100%. The lights offer smooth, flicker-free dimming.
  5. Vooraf ingestelde modusse: Your controller may offer various preset color modes or effects. Refer to your controller's manual for specific instructions.
Armacost Lighting PureVue LED Puck Light showing various color options and remote control

Image 6.1: The PureVue puck light displaying various color outputs, controlled by an Armacost Lighting RGB+W LED controller.

7. Onderhoud

The Armacost Lighting PureVue LED Puck Lights require minimal maintenance.

  • Skoonmaak: To clean the puck light, ensure power is off. Wipe gently with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or electronic components.
  • Inspeksie: Periodically inspect the wiring and connections for any signs of wear or damage. If any damage is observed, disconnect power immediately and contact Armacost Lighting support.
  • LED-leeftyd: The LEDs are designed for a long lifespan and do not require replacement.

8. Probleemoplossing

ProbleemMoontlike oorsaakOplossing
Ligte gaan nie aan nie.Geen krag na die stelsel nie.
Los bedrading konneksie.
Foutiewe kragtoevoer of beheerder.
Check if the power supply is plugged in and receiving power.
Verifieer dat alle draadverbindings veilig is.
Test power supply and controller if possible. Replace if faulty.
Lights flicker or dim inconsistently.Incompatible dimmer/controller.
Los verbinding.
Oorlaaide kragtoevoer.
Ensure you are using an Armacost Lighting RGB+W LED controller.
Gaan alle bedradingaansluitings na.
Verifieer totale wattage of connected lights does not exceed power supply capacity.
Colors are incorrect or not changing.Kontroleerder kwessie.
Verkeerde bedrading.
Ensure the controller is properly paired and functioning. Refer to controller manual.
Verify RGB+W wiring connections are correct.
Visible reflections on countertop.Light angle/position.While PureVue technology minimizes reflections, slight adjustments to puck light position or beam direction (if possible) may help.

If you continue to experience issues, please contact Armacost Lighting customer support.

9. Waarborg en Ondersteuning

9.1. Waarborginligting

The Armacost Lighting PureVue Dimmable LED Undercabinet Puck Light (Model 263412) comes with a 3-jaar beperkte waarborg from the date of purchase. This warranty covers defects in materials and workmanship under normal use. It does not cover damage resulting from improper installation, misuse, abuse, unauthorized modifications, or acts of nature.

For full warranty terms and conditions, please refer to the official Armacost Lighting webwebwerf of kontak kliëntediens.

9.2. Kliëntediens

For technical assistance, warranty claims, or general inquiries, please contact Armacost Lighting customer support:

  • Webwebwerf: www.armacostlighting.com
  • Telefoon: Verwys na die webwebwerf vir huidige kontaknommers.
  • E-pos: Verwys na die website for current contact email.

Hou asseblief u produkmodelnommer (263412) en bewys van aankoop gereed wanneer u ondersteuning kontak.

© 2024 Armacost Lighting. Alle regte voorbehou.

PureVue is a trademark of Armacost Lighting.