1. Inleiding
This manual provides instructions for the safe and efficient use of your Displays2go D2G52039 Battery-Powered LED Display Case Accent Lights. These lights are designed to illuminate display cases, curio cabinets, and retail showcases, highlighting items with 120-lumen white LED light. Please read this manual thoroughly before use and retain it for future reference.
2. Pakketinhoud
- (2) Displays2go D2G52039 Display Case Accent Lights (Silver)
- Gebruikershandleiding
Note: 3 AAA batteries per light are required and not included.
3. Veiligheidsinligting
- Moenie ou en nuwe batterye meng nie.
- Moenie alkaliese, standaard (koolstof-sink) of herlaaibare (nikkel-kadmium) batterye meng nie.
- Plaas batterye met korrekte polariteit (+ en -).
- Verwyder batterye as die produk nie vir 'n lang tydperk gebruik word nie.
- Hou batterye buite bereik van kinders.
- Do not expose the lights to water or excessive moisture. This product is for indoor use only.
- Do not attempt to disassemble or modify the lights.
4. Opstelling
4.1 Battery installasie
- Locate the battery compartment cover on the underside of the light base.
- Draai of skuif die deksel om die kompartement oop te maak.
- Insert three (3) AAA batteries into the compartment, ensuring correct polarity (+ and -) as indicated inside.
- Plaas die batterykompartement se deksel veilig terug.
Figure 1: Underside of the light base, indicating the battery compartment for AAA batteries.
4.2 Plasing
Place the accent lights on a flat, stable surface within your display case or desired area. The light head is adjustable, allowing you to tilt it to direct the light beam onto specific items.
Figure 2: The accent light with its adjustable head, ready for placement.
Figuur 3: Example of accent lights used within a display case to highlight various items.
5. Bedryfsinstruksies
Each accent light features a simple on/off switch located on its base.
- To turn the light ON, press the "I" side of the rocker switch.
- To turn the light OFF, press the "O" side of the rocker switch.
Figuur 4: Close-up view of the rocker switch for turning the light on or off.
6. Onderhoud
6.1 Skoonmaak
Wipe the lights with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.
6.2 Batteryvervanging
When the light output diminishes, it is time to replace the batteries. Follow the battery installation steps in Section 4.1 to replace the three (3) AAA batteries. Dispose of used batteries responsibly according to local regulations.
7. Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Lig skakel nie aan nie. | Batterye is leeg of verkeerd geïnstalleer. | Kontroleer die polariteit van die batterye. Vervang met vars AAA-batterye. |
| Lig is dof. | Batterye is laag. | Vervang met vars AAA-batterye. |
| Ligte flikkerings. | Los batteryverbinding of lae batterye. | Ensure batteries are securely seated. Replace with fresh AAA batteries. |
8. Spesifikasies
| Kenmerk | Detail |
|---|---|
| Modelnommer | D2G52039 |
| Handelsmerk | Vertoon 2go |
| Ligte tipe | LED |
| Lig Uitset | 120 Lumen |
| Kleur temperatuur | 6000-6500K (wit lig) |
| Kragbron | 3 x AAA-batterye (nie ingesluit nie) |
| Wattage | 1W |
| Voltage | 3.7 V |
| Materiaal | Aluminium |
| Kleur | Silwer |
| Afmetings (algeheel) | 3.0" L x 3.0" B x 3.9" H |
| Gewig (elk) | 0.28 pond (ongeveer 4.5 onse) |
| Kenmerke | Tilting head, Portable, Touch switch |
| Binne/buiteluggebruik | Slegs binnenshuis |
9. Waarborg en Ondersteuning
For warranty information or technical support, please contact Displays2go customer service. Refer to your purchase documentation for specific warranty terms and contact details.
You can also visit the official Displays2go website for additional resources and support information.
