LOKITHOR J3250 PRO Aanjaer Gebruikershandleiding

1. Inleiding

The LOKITHOR J3250 PRO is a powerful and versatile LiFePO4 jump starter designed to provide reliable starting power for vehicles with up to 9.5L gasoline and 7.5L diesel engines. It also functions as a portable power bank and features an integrated LED flashlight. This manual provides essential information for safe and effective use, setup, operation, maintenance, and troubleshooting of your device.

2. Veiligheidsinligting

Please read and understand all safety instructions before operating the LOKITHOR J3250 PRO. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Oogbeskerming: Dra altyd veiligheidsbril wanneer u met batterye werk.
• Ventilasie: Gebruik die toestel in 'n goed geventileerde area.
• Kinders: Hou die toestel buite bereik van kinders.
• Kortsluitings: Moenie die rooi en swart clamps to touch each other or the same metal object.
• Omgekeerde polariteit: Ensure correct polarity connection (red to positive, black to negative) to avoid damage. The device includes reverse-polarity protection.
• Vog: Do not immerse the device in water. While it has an IP65 rating for water and dust resistance, it is not designed for submersion.
• Skade: Moenie die toestel gebruik as dit beskadig is nie. Kontak kliëntediens vir hulp.
• Temperatuur: Do not expose the device to extreme heat or fire. Store within recommended temperature ranges.

The LOKITHOR J3250 PRO incorporates 10 safety protection technologies, including spark-proof, reverse-polarity, short-circuit, reverse-charge, low-temperature, high-temperature, over-voltage, oorbelasting, oorlading en oorstroombeskerming.

3. Produk verbyview

3.1 Wat is in die boks

• LOKITHOR J3250 PRO Jump Starter Unit
• Jumper-aansitter Clamps
• USB-A na USB-C kabel
• USB-C na USB-C kabel
• 12V adapter
• Bykomstighede Opbergtas
• Gebruikershandleiding

Included components with the LOKITHOR J3250 PRO Jump Starter.

3.2 Sleutelkenmerke

• High Starting Current: Lewer 3250 Amp peak current for reliable vehicle starting.
• Enjinversoenbaarheid: Suitable for gasoline engines up to 9.5 liters and diesel engines up to 7.5 liters.
• LiFePO4 Battery Technology: Offers over 2000 cycles at 100% depth of discharge, providing extended lifespan and enhanced chemical stability compared to traditional lead-acid or lithium-ion batteries.
• Gevorderde Veiligheid: Features 10 types of protection, including spark-proof, mistake-proof, and reverse-polarity protection.
• 100W Tweerigting-vinnige laai: Recharges the unit in approximately 60 minutes and can provide power output for USB-C devices.
• ConnectMax Tegnologie: Automatically detects clamp connection impedance to optimize starting efficiency.
• Draagbare kragbank: Provides 74.24Wh capacity with USB-A and USB-C outputs for charging phones, tablets, laptops, and other devices.
• 400-Lumen LED-flitslig: Includes multiple modes (constant, strobe, SOS) for emergency lighting.
• Duursame ontwerp: IP65 waterproof and dustproof rating, designed to operate in temperatures from -4°F to 140°F (-20°C to 60°C).
• Lang bystandtyd: Maintains charge for up to 42 months (1260 days) with minimal self-discharge.

The J3250 PRO provides 3250A peak current, suitable for large engines.

The device features an IP65 rating for water and dust resistance.

4. Opstelling en laai

4.1 Aanvanklike laai

Before first use, fully charge the LOKITHOR J3250 PRO. This ensures optimal performance and extends battery life.

1. Connect the provided USB-C to USB-C cable to the jump starter's USB-C input port.
2. Connect the other end of the USB-C cable to a 100W Power Delivery (PD) compatible wall charger (not included) or use the included 12V adapter.
3. The display will show charging progress. A full charge typically takes about 60 minutes with a 100W PD charger.

4.2 Recharging the Device

It is recommended to recharge the jump starter after each use. If not used regularly, recharge the unit every 3-6 months to maintain battery health and readiness.

5. Bedryfsinstruksies

5.1 Jump Starting a Vehicle (Normal Mode)

Use Normal Mode for vehicles with a partially discharged battery.

1. Heg Clamps: Koppel die rooi (+) clamp to the positive terminal of the vehicle battery. Connect the black (-) clamp na die negatiewe aansluiting van die voertuigbattery.
2. Krag aan: Turn on the LOKITHOR J3250 PRO. The device will automatically detect the battery and prepare for jump starting.
3. Begin Voertuig: Start jou voertuig.
4. Skakel af en ontkoppel: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps van die voertuig se battery.

Steps for jump starting a vehicle using Normal Mode.

5.2 Jump Starting a Vehicle (Boost Mode)

Use Boost Mode for completely dead batteries where Normal Mode does not initiate a jump start.

1. Heg Rooi Cl aanamp: Koppel die rooi (+) clamp na die positiewe terminaal van die voertuigbattery.
2. Activate Boost: Long press the 'Boost' button on the jump starter for more than 5 seconds. The display will indicate Boost Mode is active.
3. Heg Swart Cl aanamp: Koppel die swart (-) clamp na die negatiewe aansluiting van die voertuigbattery.
4. Begin Voertuig: Start your vehicle within 30 seconds of activating Boost Mode.
5. Skakel af en ontkoppel: Once the vehicle starts, power off the jump starter and immediately disconnect the clamps van die voertuig se battery.

Steps for jump starting a vehicle using Boost Mode for completely dead batteries.

5.3 Using as a Portable Power Bank

The J3250 PRO can charge various electronic devices.

• Connect your device to the USB-A output port (12V/1.5A, 18W QC) or the USB-C output port (20V/5A, 100W PD).
• Die toestel sal outomaties begin laai.

The J3250 PRO can charge multiple electronic devices.

5.4 Gebruik van die LED-flitslig

The integrated 400-lumen LED flashlight provides illumination and emergency signaling.

• Press the flashlight button once for constant illumination.
• Press again to cycle through Strobe and SOS modes.
• Druk 'n vierde keer om die flitslig af te skakel.

The 400-lumen LED flashlight offers multiple modes for various situations.

6. Onderhoud

• Herlaai gereeld: To prolong battery life, recharge the unit after each use. If stored, recharge every 3-6 months.
• Berging: Store the jump starter in a cool, dry place, away from direct sunlight and moisture. The device has a standby time of up to 42 months when fully charged.
• Skoonmaak: Clean the exterior of the device with a soft, dry cloth. Do not use harsh chemicals or abrasive materials.
• Clamp Sorg: Verseker die clamps are clean and free of corrosion for optimal connection.

The J3250 PRO maintains charge for up to 42 months in standby.

7. Probleemoplossing

If you encounter issues with your LOKITHOR J3250 PRO, refer to the following common troubleshooting steps:

• Toestel skakel nie aan nie: Ensure the device is charged. If the battery is completely depleted, charge it for at least 15-30 minutes before attempting to power on.
• Vehicle Not Starting (Normal Mode):
  • Kontroleer dat die clamps stewig aan die korrekte batteryterminale gekoppel is (rooi na positief, swart na negatief).
  • Ensure the vehicle battery terminals are clean and free of corrosion.
  • If the vehicle battery is completely dead, try using Boostmodus.
• Vehicle Not Starting (Boost Mode): Ensure the Boost Mode was activated correctly (long press for 5 seconds) and the vehicle was started within 30 seconds.
• Clamps Sparking: This is normal if the clamps are connected incorrectly or if there is a poor connection. Ensure proper connection and clean terminals. The device has spark-proof protection.
• Toestel oorverhit: The device has high-temperature protection. If it feels excessively hot, disconnect it and allow it to cool down before further use.
• Laai kwessies: Ensure the charging cable and adapter are functioning correctly and are compatible with 100W PD for fast charging.

If problems persist, please contact LOKITHOR customer support.

8. Spesifikasies

The J3250 PRO is designed to operate in a wide range of temperatures.

9. Waarborg en Ondersteuning

LOKITHOR products are designed for reliability and performance. For warranty information, product registration, or technical support, please refer to the official LOKITHOR webwebwerf of kontak hul kliëntediensafdeling direk. Bewaar u aankoopbewys as bewys van aankoop vir waarborgeise.

If you have any after-sales questions, please feel free to contact us.