SAMCON SBE-C-1 DC LED Light with Switch User Manual

Inleiding

Thank you for choosing the SAMCON SBE-C-1 DC LED Light with Switch. This energy-efficient LED light is designed for various DC applications, providing bright and reliable illumination. Please read this manual carefully before installation and operation to ensure safe and optimal performance.

Belangrike veiligheidsinstruksies

• Ontkoppel krag voor installasie of diens.
• This product is designed for DC (Direct Current) power sources only. Ensure the power supply matches the product's voltage vereistes.
• Do not expose the light to excessive moisture or extreme temperatures.
• Handle the LED board with care to avoid damage to components.
• Ensure proper polarity when connecting wires (red for positive, black for negative). Incorrect polarity can damage the device.
• Installation should be performed by a qualified individual if you are unsure.

Pakketinhoud

• 1 x SAMCON SBE-C-1 DC LED Light with Switch

Produk verbyview

The SAMCON SBE-C-1 is a compact and energy-efficient DC LED light featuring an integrated switch for convenient operation. It consists of an LED board with multiple LED chips, a control component, and pre-attached power wires.

Figuur 1: Voorkant view of the SAMCON SBE-C-1 DC LED Light board, displaying the array of LED chips, the SAMCON brand name, model number SBE-C-1, and the attached red (positive) and black (negative) power wires.

Figuur 2: Terug view of the SAMCON SBE-C-1 DC LED Light board, revealing a metallic heat sink plate designed for thermal management, with two visible screw holes for mounting.

Installasie-instruksies

1. Berei die monteeroppervlak voor: Choose a suitable, flat surface for mounting the LED light. Ensure the surface can support the light and is free from obstructions.
2. Bevestig die LED-lig: Use appropriate screws (not included) to secure the LED board to the chosen surface through the mounting holes. Refer to Figure 2 for the location of mounting holes on the back plate.
3. Koppel krag:
   • Identify the positive (+) and negative (-) terminals of your DC power source.
   • Koppel die rooi draad from the LED light to the positiewe (+) terminaal of your DC power source.
   • Koppel die swart draad from the LED light to the negatiewe (-) terminaal of your DC power source.
   • Warning: Ensure correct polarity to prevent damage to the LED light.
4. Verifieer verbindings: Double-check all connections to ensure they are secure and correctly polarized.

Bedryfsinstruksies

1. Krag aan: Once the LED light is securely installed and correctly wired to a compatible DC power source, apply power to the circuit.
2. Use the Switch: The SAMCON SBE-C-1 features an integrated push-button switch. Press the switch to turn the LED light ON. Press it again to turn the LED light OFF.

Onderhoud

• Skoonmaak: Gently wipe the LED light with a soft, dry cloth to remove dust. Do not use abrasive cleaners or solvents.
• Inspeksie: Periodically check the wiring for any signs of wear or damage. Ensure mounting screws remain tight.
• Hittebestuur: Ensure adequate airflow around the back of the LED board (heat sink) to prevent overheating, especially during prolonged use.

Probleemoplossing

Spesifikasies

Waarborg en Ondersteuning

For warranty information or technical support, please contact SAMCON customer service through your point of purchase. Keep your purchase receipt as proof of purchase.