Wallpad L6

Wallpad L6 Gold Brushed Aluminum Wall Module User Manual

Model: L6 - Dual USB Charging Module

1. Inleiding

This manual provides detailed instructions for the installation, operation, and maintenance of the Wallpad L6 Gold Brushed Aluminum Wall Module, specifically the dual USB charging variant. Please read this manual thoroughly before installation and use to ensure safe and efficient operation.

2. Veiligheidsinstruksies

  • Installasie moet deur 'n gekwalifiseerde elektrisiën uitgevoer word in ooreenstemming met plaaslike elektriese kodes en regulasies.
  • Always disconnect power at the circuit breaker before installing or servicing the module.
  • Moenie installeer in nat of damp liggings.
  • Maak seker dat alle bedradingsverbindings veilig en behoorlik geïsoleer is.
  • Do not exceed the specified electrical ratings of the module.
  • Hou buite bereik van kinders.

3. Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

  • Wallpad L6 Gold Brushed Aluminum Wall Module (Dual USB Charging)
  • Monteer skroewe
  • Gebruikershandleiding (hierdie dokument)

Note: Other modules (e.g., EU French Socket, Wall Switch) are sold separately and may have different installation requirements.

4. Opstelling en installering

This section outlines the general steps for installing the Wallpad L6 module. Professional installation is recommended.

  1. Berei die installasie area voor: Maak seker dat die kragtoevoer na die installasiearea by die hoofstroombreker afgeskakel is.
  2. Verifieer verenigbaarheid: The Wallpad L6 module is designed for an 86 Type Square Box. Round boxes are not compatible.
  3. Koppel bedrading: Connect the live, neutral, and ground wires to the corresponding terminals on the back of the module. Refer to the wiring diagram provided with the product packaging for specific connections.
  4. Mount the Module: Carefully place the module into the 86 Type Square Box. Secure it using the provided mounting screws. Ensure the module is flush with the wall surface.
  5. Heg voorplaat aan: Secure the brushed aluminum faceplate onto the module.
  6. Herstel krag: Sodra die installasie voltooi is en alle verbindings veilig is, herstel die krag by die stroombreker.
Terug view of Wallpad L6 module with dimensions and an 86 Type Square Box

Figuur 4.1: Terug view of the Wallpad L6 module showing dimensions (86mm x 86mm, 60mm depth, 66.5mm screw distance) and an 86 Type Square Box. This module requires an 86 Type Square Box for proper installation; round boxes are not compatible.

5. Operating Instructions (Dual USB Charging Module)

The Wallpad L6 Dual USB Charging Module provides convenient power for charging compatible devices.

Voorkant view of Wallpad L6 dual USB charging module with a red indicator light

Figuur 5.1: Voorkant view of the Wallpad L6 dual USB charging module. It features two USB-A ports and a red LED indicator light at the top.

  1. Koppel toestel: Plug your USB charging cable into one of the two USB-A ports on the module.
  2. Laai aanduiding: The red indicator light (if present and active) will illuminate to show that the module is powered and ready to charge.
  3. Laai: Connect the other end of your USB cable to your compatible electronic device (e.g., smartphone, tablet). The device should begin charging automatically.
  4. Ontkoppel: Once charging is complete, safely disconnect your device and then the USB cable from the module.

Note: The Wallpad L6 series also offers other modules like EU French Sockets and Wall Switches, which operate according to their specific functions. The images below illustrate examples of these other modules within the L6 series.

Wallpad L6 EU French Socket module installed in a room setting

Figuur 5.2: 'N Example of a Wallpad L6 EU French Socket module, showcasing its design within a living space.

Wallpad L6 wall switch module with a satin aluminum panel and illuminated buttons

Figuur 5.3: 'N Example of a Wallpad L6 wall switch module, featuring a satin aluminum panel and illuminated touch buttons.

6. Onderhoud

  • Skoonmaak: Disconnect power before cleaning. Use a soft, dry cloth to wipe the surface of the module. Do not use abrasive cleaners, solvents, or excessive moisture.
  • Inspeksie: Periodically inspect the module for any signs of damage, loose connections, or discoloration. If any issues are found, disconnect power and consult a qualified electrician.

7. Probleemoplossing

ProbleemMoontlike oorsaakOplossing
Module not charging devices.
  • Geen krag na die module nie.
  • Foutiewe USB-kabel of toestel.
  • Oorladingsbeskerming geaktiveer.
  • Kontroleer die stroombreker en maak seker dat die krag aan is.
  • Probeer 'n ander USB-kabel of toestel.
  • Disconnect devices, wait a few minutes, then reconnect.
Module is loose in the wall.Onbehoorlike montering.Disconnect power, tighten mounting screws. Ensure an 86 Type Square Box is used.
Rooi aanwyserliggie is af.Geen krag na die module nie.Check circuit breaker and wiring connections. Consult a qualified electrician if necessary.

8. Spesifikasies

  • Model: Wallpad L6 (Dual USB Charging)
  • Materiaal: Gold Brushed Aluminum Panel
  • Verenigbaarheid: 86 Type Square Box
  • Afmetings: Approximately 86mm x 86mm (Front Panel)
  • USB-uitset: Please refer to product packaging for exact USB output specifications.
  • Eerste datum beskikbaar: 4 April 2024

9. Waarborg en Ondersteuning

For warranty information and technical support, please refer to the documentation included with your purchase or contact your retailer. Keep your proof of purchase for warranty claims.

For further assistance, you may visit the official Wallpad webwebwerf of kontak hul kliëntediensafdeling.

© 2024 Wallpad. All rights reserved.