Inleiding
This manual provides detailed instructions for the setup, operation, and maintenance of your KOSUMOSU 9.7-inch 3D LED Neon Digital Wall/Desk Clock. Please read this manual thoroughly before using the product to ensure proper function and longevity.
Veiligheidsinligting
- Ensure the clock is powered by a 5V/1A AC adapter (not included). Using an incorrect power adapter may damage the device.
- Hou die toestel weg van water en omgewings met hoë humiditeit.
- Do not attempt to disassemble or repair the clock yourself. Contact customer service for assistance.
- Keep the remote control battery (CR2025) out of reach of children.
Pakketinhoud
- KOSUMOSU 9.7-inch 3D LED Neon Digital Clock
- Remote Control (with CR2025 button battery)
- 3-meter USB Power Cable
- Bureaubladbeugel
- Wall Mounting Accessories (Dowel, Screws)
- Gebruikershandleiding (hierdie dokument)
Opstelling
1. Kragverbinding
- Connect the provided 3-meter USB power cable to the clock's power input port.
- Plug the other end of the USB cable into a 5V/1A AC adapter (not included).
- Plug the AC adapter into a standard wall outlet. The clock will power on.
Note: The clock has a built-in super farad capacitor for time memory, providing approximately 2 hours of backup in case of power failure. This is not for regular power supply.
2. Afstandbeheerbattery
The remote control comes with a CR2025 button battery pre-installed. If the remote does not respond, check or replace the battery.
3. Monteer Opsies
Beeld: Agter view of the KOSUMOSU 3D LED Neon Digital Clock, illustrating the wall mounting holes and the location of the function buttons. The image also displays product specifications.
- Werkskermplasing: Attach the included desktop bracket to the bottom of the clock for stable placement on any flat surface.
- Muurmontering: Use the provided screws and dowels to securely mount the clock on a wall. The clock features keyhole slots on the back for easy hanging.
Bedryfsinstruksies
The clock is primarily operated using the included remote control. There are also three function buttons on the back of the clock for basic adjustments.
Afstandbeheerfunksies
Image: The KOSUMOSU 3D LED Neon Digital Clock showing the time in vibrant colors, with its remote control positioned in front.
- STEL: Enter/Exit setting mode.
- OP/AF Pyle: Adjust values during setting.
- 12/24H: Switch between 12-hour and 24-hour time formats.
- Alarm: Activate/Deactivate alarm, enter alarm setting mode.
- SLUIMER: Activate snooze function when alarm sounds.
- HELDER: Cycle through brightness levels (High/Medium/Low/Auto/Off).
- COLOR/MODE: Change display color modes (Neon, 7 separate colors, color gradient, custom).
- TEMP (℃/℉): Switch between Celsius and Fahrenheit temperature display.
- DATUM: Display date, enter date setting mode.
Stel tyd en datum in
- Druk die STEL knoppie op die afstandbeheerder. Die uursyfers sal flikker.
- Gebruik die UP en AF pyle om die uur aan te pas.
- Druk STEL weer om na minute te skuif, pas dan aan met OP/AF.
- Hou aan druk STEL om deur jaar-, maand- en daginstellings te blaai, en elkeen aan te pas met OP/AF.
- Druk STEL een laaste keer om die instellingsmodus te verlaat.
- Om tussen 12-uur en 24-uur formaat te wissel, druk die 12/24H knoppie.
Stel alarm
- Druk die ALARM button on the remote. The alarm hour digits will flash.
- Gebruik OP/AF om die wekker uur te stel.
- Druk ALARM again to set the alarm minutes, adjust with OP/AF.
- Druk ALARM again to confirm and activate the alarm. An alarm icon will appear on the display.
- To deactivate the alarm, press ALARM again until the icon disappears.
- Wanneer die alarm lui, druk SLUIMER for an additional 5 minutes of sleep (up to 3 times).
Helderheid aanpassing
Image: The KOSUMOSU 3D LED Neon Digital Clock illustrating its automatic dimming function via a built-in light sensor and remote control dimming with High, Medium, Low, and Off settings.
- Druk die HELDER button on the remote to cycle through brightness levels: High, Medium, Low, Auto, and Off.
- Outomatiese verduistering: When set to "Auto", the clock's built-in light sensor will automatically adjust the brightness across 8 levels based on ambient light conditions.
Kleurmodusse
Image: The KOSUMOSU 3D LED Neon Digital Clock showcasing different custom color and neon light options, highlighting its multi-color LED capabilities.
Image: The KOSUMOSU 3D LED Neon Digital Clock illustrating how to switch between various colors using the remote control, showing different color displays for day and night.
Druk die COLOR/MODE button on the remote to cycle through different display color options:
- Neon Light: Dynamic, flashing neon light effect.
- Color Gradient: Smooth transitions between colors.
- 7 Separate Colors: Static display of individual colors.
- Custom Color Option: Allows selection of a specific color.
Loop Display (Time, Date, Temperature)
Image: The KOSUMOSU 3D LED Neon Digital Clock demonstrating its loop display feature, cycling through the current time, date (November 8th), and temperature (71°F).
To activate the loop display for time, date, and temperature, press the dedicated LUS button on the remote control (if available, otherwise it cycles automatically after setting date/temp display). The clock will automatically cycle through these displays.
Onderhoud
- Maak die horlosie se oppervlak skoon met 'n sagte, droë lap. Moenie skuurmiddels of oplosmiddels gebruik nie.
- Maak seker dat die horlosie afgeskakel is voordat jy dit skoonmaak.
- Replace the remote control battery (CR2025) as needed.
Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Die horlosie skakel nie aan nie. | Geen krag, foutiewe adapter of los konneksie. | Ensure the USB cable is securely connected and the 5V/1A AC adapter is plugged into a working outlet. Try a different adapter if available. |
| Afstandbeheer werk nie. | Remote battery is dead or incorrectly inserted. Obstruction between remote and clock. | Replace the CR2025 battery in the remote. Ensure there are no obstructions and point the remote directly at the clock. |
| Die alarm lui nie. | Alarm is not activated or volume is too low (if adjustable). | Verify the alarm icon is displayed on the clock. Ensure the alarm time is set correctly. (Note: This model does not specify adjustable alarm volume). |
| Display is too bright/dim at night/day. | Brightness setting is not optimal. | Adjust brightness using the HELDER button on the remote. Set to "Auto" for automatic adjustment based on ambient light. |
Spesifikasies
Image: A visual representation of the KOSUMOSU 3D LED Neon Digital Clock's dimensions and key specifications, including product weight, size, input voltage, and power supply requirements.
| Kenmerk | Detail |
|---|---|
| Handelsmerk | KOSUMOSU |
| Model | 9.7IN Neon Clock-ACD210C |
| Produk afmetings | 24.64 x 3.81 x 9.91 cm (9.7 x 3.9 x 0.9 duim) |
| Produk Gewig | 154.22 g |
| Tipe vertoon | Digital LED (3D effect) |
| Kragbron | Corded Electric (5V/1A AC adapter, not included) |
| Lengte van USB-kabel | 3 XNUMX meter |
| Tyd Geheue | Built-in super farad capacitor (approx. 2 hours) |
| Afstandbeheer battery | CR2025 (ingesluit) |
| Monteer Opsies | Table top, Wall mount |
| Spesiale kenmerke | Alarm with snooze, Auto Dimmable (8 levels), Remote Dimmable (High/Medium/Low/Off), RGB Neon Colors (7 colors, gradient, custom), Large Display, Time/Date/Temperature display. |
| Materiaal | Plastiek |
Waarborg en kliëntediens
The KOSUMOSU 9.7-inch 3D LED Neon Digital Wall/Desk Clock comes with a 2 jaar waarborg.
If you encounter any quality issues or require assistance with product usage or settings, please contact KOSUMOSU customer service immediately. We are committed to providing support and will guide you through troubleshooting or arrange for a replacement if necessary.
For support, please refer to the contact information provided with your purchase or visit the official KOSUMOSU webwebwerf.