FLEXISPOT EN1 Electric Stand Up Desk User Manual

1. Inleiding

Welcome to the user manual for your FLEXISPOT EN1 Electric Stand Up Desk. This document provides essential information for the safe and efficient use of your new adjustable desk. Please read all instructions carefully before assembly and operation.

Veiligheidswaarskuwings

• Moenie die maksimum gewigslimiet van 176 lbs (80 kg) oorskry nie.
• Keep fingers and other body parts clear of moving parts during operation to prevent injury.
• Ensure all cables are properly managed and secured to avoid entanglement or damage during height adjustments.
• Follow all assembly instructions carefully and use tools safely.
• Hierdie produk is bedoel vir gebruik deur volwassenes.

2. Ingesluit komponente

Before beginning assembly, verify that all parts listed below are present in your package. Refer to the installation video for visual identification of components.

• One-Piece Desktop (55 x 28 inches, Rustic Top)
• Desk Frame (Black)
• Lifting Columns (2 units)
• Desk Feet (2 units)
• Dwarsbalk
• Supporting Plates (2 units)
• Motor with Keypad (4-memory presets)
• Transmissie Rod
• Koppeling
• Kragprop
• Hooks (for headphones/accessories)
• Assembly Tools (Allen wrench, spanner)
• Instruksie Handleiding

Let wel: The desktop and desk frame may ship and arrive separately.

Image: Packaging showing separate boxes for desktop and frame.

3. Monteer-instruksies

Follow these steps to assemble your FLEXISPOT EN1 desk. A detailed installation video is provided below for visual guidance.

Installasie Video Gids

Video: FLEXISPOT Standing Desk Frame Installation Guide. This video demonstrates the step-by-step assembly process for the desk frame and motor components.

Stap-vir-stap samestelling

1. Insert Coupling into Motor: Carefully insert the coupling into the motor. Ensure it is oriented correctly as shown in the installation video (0:09 mark).
2. Insert Motor and Right Column: Attach the motor assembly to the right lifting column. Secure it using the provided screws and Allen wrench (0:16 mark).
3. Install Crossbeam: Align the three protrusions on the lifting column with the holes in the crossbeam and secure it with screws (0:25 mark).
4. Install Support Plates: Attach the two support plates to the top of the lifting columns using the provided screws (0:35 mark).
5. Install Desk Feet: Secure the desk feet to the bottom of the lifting columns using the provided screws (0:40 mark).
6. Adjust Crossbeam: Loosen the screws on the crossbeam, adjust the width to fit your desktop, and then tighten the screws securely (0:47 mark).
7. Install Table Board: Place the desktop upside down on a soft, clean surface. Carefully position the assembled frame onto the desktop. Use a drill (prepared by customer) and the provided screws to attach the desktop to the frame (0:59 mark).
8. Install Transmission Rod: Insert the transmission rod into the motor and the left lifting column, ensuring it connects properly (1:07 mark).
9. Tighten Transmission Rod Nut: Use the spanner to tighten the nut on the transmission rod (1:19 mark).
10. Installeer sleutelbord: Mount the control keypad to the underside of the desktop in a convenient location using screws (1:22 mark).
11. Installeer hake: Attach the accessory hooks to the underside of the desktop as desired (1:25 mark).
12. Koppel kabels: Connect all necessary power and control cables as shown in the video (1:30 mark). Ensure connections are secure and cables are managed to prevent interference with movement.

Once assembly is complete, carefully flip the desk upright. Ensure it is stable before placing any items on it.

4. Bedryfsinstruksies

Your FLEXISPOT EN1 desk features smooth electric height adjustment and convenient memory presets for personalized comfort.

Hoogte verstelling

• Lig lessenaar op: Druk en hou die Op (^) button on the control panel to raise the desk to your desired standing height.
• Onderste lessenaar: Druk en hou die Af (v) button on the control panel to lower the desk to your desired sitting height.
• The desk height can be adjusted smoothly and quietly between approximately 29.1 inches (sitting) and 46.7 inches (standing), including the 1-inch tabletop thickness.

Image: Programmable Control Panel with LED display and memory presets.

Geheuevoorinstellings

The control panel features four memory preset buttons (1, 2, 3, 4) to save and recall your preferred sitting and standing heights.

1. Om 'n voorafinstelling te stoor: Verstel die lessenaar tot die verlangde hoogte met die Op/Af-knoppies. Druk die 'M' button (or similar memory set button, often labeled with an 'i' or 'f' followed by a number) once, then immediately press one of the number buttons (1, 2, 3, or 4) to save the current height to that preset. The display will confirm the setting.
2. Om 'n voorafinstelling te herroep: Druk eenvoudig die ooreenstemmende nommerknoppie (1, 2, 3 of 4). Die lessenaar sal outomaties na die gestoorde hoogte beweeg.

Produk verbyview Video

Video: Upgrade Your Space with FLEXISPOT One-Piece Desk. This video highlights the desk's features, including its quiet operation and seamless height transitions.

5. Onderhoud

Gereelde onderhoud verseker die lang lewensduur en optimale prestasie van u lessenaar.

• Skoonmaak: Vee die lessenaar en raam af met 'n sagte, damp lap. Vermy skuurmiddels of harde chemikalieë wat die afwerking kan beskadig.
• Kabelbestuur: Periodically check that all cables are securely fastened and not interfering with the desk's movement.
• Draai bevestigingsmiddels vas: Over time, some fasteners may loosen. Periodically check and tighten all screws and bolts to maintain stability.
• Gewigsbeperking: Always adhere to the 176 lbs (80 kg) weight limit to prevent damage to the motor and frame.

6. Probleemoplossing

Indien u enige probleme met u lessenaar ondervind, raadpleeg die volgende algemene wenke vir probleemoplossing:

• Lessenaar beweeg nie:
  • Ensure the power cable is securely plugged into both the desk and a working wall outlet.
  • Check for any obstructions under or around the desk that might be preventing movement.
  • Perform a reset: Unplug the desk for 10 seconds, then plug it back in. Press and hold the 'Down' button until the desk reaches its lowest point and slightly rises, indicating a successful reset.
• Ongelyke beweging:
  • Maak seker dat die lessenaar op 'n gelyk oppervlak geplaas is.
  • Check that all assembly screws, especially those on the crossbeam and lifting columns, are securely tightened.
• Foutkodes:
  • If an error code appears on the display, refer to the full troubleshooting guide on the FLEXISPOT webwebwerf of kontak kliëntediens.

For persistent issues, please contact FLEXISPOT customer support.

7. Spesifikasies

Afmetings diagram

Image: Visual representation of the desk's desktop size and adjustable frame height.

8. Waarborginligting

Your FLEXISPOT EN1 Electric Stand Up Desk comes with a Limited Warranty. For detailed information regarding warranty coverage, terms, and conditions, please refer to the warranty card included in your package or visit the official FLEXISPOT webwebwerf.

9. Kliëntediens

If you have any questions, require assistance with assembly, or need troubleshooting support, please do not hesitate to contact FLEXISPOT customer service.

• Aanlyn ondersteuning: Visit the official FLEXISPOT website for FAQs, product guides, and contact forms.
• E-pos ondersteuning: Refer to your product packaging or the FLEXISPOT webwebwerf vir die toepaslike kliëntediens-e-posadres.
• Telefoonondersteuning: Contact numbers can typically be found on the FLEXISPOT webwebwerf of jou produkdokumentasie.