1. Produk verbyview
The BUNN Axiom DV-3 is a dual voltage automatic commercial coffee maker designed for high-volume environments. It features a large 200 oz (5.9 L) tank for continuous brewing and three lower warmers to keep coffee at optimal serving temperature. This model incorporates advanced technologies like BrewWIZARD for simplified programming and BrewLOGIC for consistent brew levels, adapting to varying water pressure.

Beeld 1.1: Voorkant view of the BUNN Axiom DV-3 Commercial Coffee Maker, showcasing sy vlekvrye staalkonstruksie en beheerpaneel.
2. Sleutel kenmerke
- Dubbel Voltage Aanpasbaarheid: Operates at 120V/15 amp or 120/208-240V/20 amp.
- Groot tenk kapasiteit: 200 oz (5.9 L) tank for back-to-back brewing.
- Three Lower Warmers: Maintains coffee temperature.
- Digital Brewer Control (BrewWIZARD): Simplifies programming of brew level, cold brew lock-out, and tank temperature via an LCD display.
- Automatic Water Pressure Adjustment: Adapts to varying water pressure for consistent performance.
- BrewLOGIC Technology: Calculates flow rate and adjusts brew time in high lime areas to maintain consistent pot levels.
- Digitale temperatuurbeheer: Ensures precise temperature for optimal coffee extraction.
- Pre-infusion and Pulse Brew: Controls coffee extraction for enhanced flavor.
- SplashGard Funnel: Deflects hot liquids away from the hand for safety.
- Automatic Warmer Shut-off: Verbeter veiligheid en energie-doeltreffendheid.
- Energy-Saver Mode: Reduces tank temperature during idle periods.
- Electronic Diagnostics: Facilitates easier service and troubleshooting.
3. Opstelling
Before initial use, ensure the coffee maker is placed on a stable, level surface. This unit requires a direct water line connection for automatic filling. Consult a qualified plumber for proper installation of the water line to prevent leaks and ensure optimal performance. The unit is dual voltage adaptable; ensure it is connected to the appropriate power supply (120V/15 amp or 120/208-240V/20 amp) as per local electrical codes.
Refer to the dimensions diagram for space planning and installation requirements.

Image 3.1: Technical diagram illustrating the dimensions of the BUNN Axiom DV-3 coffee maker, crucial for installation planning.
4. Bedryfsinstruksies
4.1 Initial Start-up and Filling
- After water line connection, turn on the main power switch. The tank will automatically begin to fill.
- Allow the tank to heat to the set temperature (displayed on the LCD).
4.2 Koffie brou
- Place a paper filter (#4 size recommended) into the SplashGard funnel.
- Voeg die verlangde hoeveelheid gemaalde koffie by die filter.
- Slide the funnel into the brew head.
- Place an empty decanter (not included) on a warmer plate below the funnel.
- Press the 'BREW' button on the control panel. The brewing cycle will begin.
- Once brewing is complete, remove the decanter and place it on an available warmer.
4.3 Using Warmers
The unit features three warmers: one directly under the brew head (front) and two additional lower warmers (front and rear). Use the 'ENABLE ON/OFF WARMER' buttons on the control panel to activate or deactivate each warmer as needed. The automatic warmer shut-off feature will engage after a period of inactivity.
4.4 Warmwaterdispenser
A hot water dispenser is located on the front of the unit. To dispense hot water, push the red lever. Exercise caution as the water is hot.

Image 4.1: The BUNN Axiom DV-3 coffee maker in operation, with three carafes on the warming plates, demonstrating its capacity.
5. Onderhoud
Regular maintenance ensures optimal performance and longevity of your coffee maker. Always unplug the unit and allow it to cool before cleaning.
5.1 Daaglikse skoonmaak
- Vee buiteoppervlakke af met adamp lap. Moenie skuur skoonmaakmiddels gebruik nie.
- Clean the brew funnel and decanters with mild soap and water. Note: The item is not dishwasher safe.
5.2 Descaling (for High Lime Areas)
If operating in high lime areas, periodic descaling is necessary. The BrewLOGIC technology helps manage this, but manual descaling may still be required. Refer to the full product manual for detailed descaling procedures using appropriate descaling solutions. The built-in tank drain facilitates this process.
6. Probleemoplossing
The BUNN Axiom DV-3 is equipped with electronic diagnostics to assist in identifying and resolving operational issues. If a problem occurs, check the LCD display for error codes or messages.
- Geen watervloei nie: Check water line connection and ensure water supply is on. Verify the tank is filling.
- Coffee Not Hot Enough: Ensure warmers are activated and the tank temperature is set correctly via BrewWIZARD.
- Inconsistent Brew Levels: If in a high lime area, BrewLOGIC should compensate. If issues persist, descaling may be required.
- Foutboodskappe: Consult the comprehensive product manual for specific error code interpretations and recommended actions.
For issues not resolved by basic troubleshooting, contact customer support or a certified service technician.
7. Spesifikasies
| Kenmerk | Spesifikasie |
|---|---|
| Handelsmerk | Bunn |
| Model Naam | Axiom DV-3 |
| Modelnommer | 38700.0009 |
| Kapasiteit | 12 Cups (per decanter) |
| Tenk kapasiteit | 200 l |
| Kleur | Vlekvrye staal |
| Produk Afmetings (D x B x H) | 22.1" x 16.3" x 16.8" |
| Item gewig | 32 pond |
| Wattage | 1500 watt |
| Voltage | 120 Volts (Dual Voltage Adaptable: 120V/15A or 120/208-240V/20A) |
| Koffie-invoertipe | Gemaalde Koffie |
| Filter tipe | Paper (#4 coffee filter size) |
| Bedryfsmodus | Volledig outomaties |
| Spesiale kenmerk | Outo-afskakel |
| Materiaal | Vlekvrye staal |

Image 7.1: The BUNN Axiom DV-3 coffee maker positioned on a kitchen countertop, illustrating its compact commercial design.
8. Waarborg en Ondersteuning
For warranty information, please refer to the documentation included with your product or visit the official Bunn website. Bunn offers various protection plans for extended coverage, including 3-Year and 4-Year options, as well as a Complete Protect monthly plan.
For technical assistance, service, or to purchase replacement parts, please contact Bunn customer support. Ensure to have your model number (38700.0009) and serial number available when contacting support.