1. Inleiding
This manual provides detailed instructions for the installation, operation, and maintenance of your NICOR DGC43120SRDWH 4-inch selectable canless adjustable gimbal LED recessed downlight. Please read these instructions carefully before beginning installation and retain them for future reference.
Image 1: NICOR DGC43120SRDWH 4-inch LED Recessed Downlight. This image shows the complete downlight unit with its white finish and adjustable gimbal.
2. Veiligheidsinligting
WAARSKUWING: Risiko van elektriese skok. Ontkoppel die krag by die sekering of stroombreker voor installasie of onderhoud.
- Alle elektriese verbindings moet in ooreenstemming wees met plaaslike en Nasionale Elektriese Kode (NEC) standaarde.
- Consult a qualified electrician if you are unsure about proper installation.
- Moenie installeer op plekke waar die bedryfstemperatuur die toestel se gegradeerde temperatuur oorskry nie.
- Maak seker dat die toebehore behoorlik geaard is.
- This product is suitable for indoor use only. Not water resistant.
- Vir installasies waar kragstuwing moontlik is, beveel NICOR aan om bykomende oplewingbeskerming by die elektriese verspreidingspaneel te installeer.
3. Pakketinhoud
Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:
- Selectable LED Downlight (DGC43120SRDWH)
- Plenum-rated cable
- Off-board driver / Remote Junction Box
4. Kenmerke
The NICOR DGC43120SRDWH downlight offers advanced features for versatile lighting:
- Canless Design: Installs directly into the ceiling; no traditional recessed housing or junction box is required.
- Adjustable Directional Lighting: Features 25° tilt and 360° rotation for precise light direction.
- Kiesbare kleurtemperatuur (CCT): Choose from 5 color temperatures (2700K, 3000K, 3500K, 4000K, 5000K) using a switch on the junction box.
- Hoë prestasie: Produces over 715 Lumens at 9-Watts (equivalent to a 65W incandescent bulb) with an impressive 97 CRI (Color Rendering Index) and R9 value over 70.
- Dimbaar: Fully dimmable to less than 5% using standard TRIAC LED Dimmers.
- Lae-Profile: Designed for installation into ceilings up to 1-inch thick.
- Duursame konstruksie: Fully enclosed aluminum housing protects electrical components and provides a wet location rating.
Image 2: Key specifications and selectable color temperature feature of the downlight.
Image 3: Illustration of the 25° tilt and 360° rotation capabilities of the gimbal.
Image 4: Visual representation of the 33° beam angle, showing focused illumination.
Beeld 5: Sykant view illustrating the low-profile design, suitable for thin ceilings.
Beeld 6: Bo-na-onder view of the fully enclosed aluminum housing, highlighting its protective features.
5. Opstelling en installering
Gereedskap benodig: Hole saw, measuring tape, pencil, wire strippers, screwdriver.
- Skakel krag af: Before starting any electrical work, ensure the power is turned off at the circuit breaker or fuse box to prevent electric shock.
- Mark and Cut Hole: Use the provided 3.75-inch template (or measure 3.75 inches) to mark the desired location on the ceiling. Use a hole saw to cut the opening.
- Koppel bedrading: Open the remote junction box. Connect the building's electrical wires (hot, neutral, ground) to the corresponding wires inside the junction box using appropriate wire connectors. Ensure all connections are secure.
- Kies kleurtemperatuur: Before closing the junction box, use the switch located inside to select your desired color temperature (2700K, 3000K, 3500K, 4000K, or 5000K).
- Veilige aansluitboks: Close the junction box and place it above the ceiling, ensuring it is securely positioned and not resting on the downlight.
- Connect Downlight to Junction Box: Connect the plenum-rated cable from the downlight to the remote junction box. Ensure the connection is firm.
- Install Downlight: Push the spring-loaded retention clips on the downlight upwards and insert the downlight into the ceiling opening. Release the clips to secure the fixture against the ceiling.
- Herstel krag: Once the downlight is securely installed, restore power at the circuit breaker.
Image 7: Diagram showing the remote junction box and spring-loaded retention clips for canless installation.
Image 8: Simplified installation diagram illustrating the connection between the downlight and the driver above the ceiling.
6. Bedryfsinstruksies
After successful installation, operate your downlight as follows:
- Krag aan/af: Use your standard wall switch to turn the light fixture on or off.
- verduistering: If connected to a compatible TRIAC LED dimmer, adjust the dimmer switch to control the light intensity.
- Adjusting Gimbal: Gently tilt the inner light module up to 25° in any direction or rotate it 360° to direct the light beam as desired.
- Veranderende kleurtemperatuur: To change the color temperature, you must first turn off power at the circuit breaker. Then, carefully remove the downlight from the ceiling to access the remote junction box. Open the junction box and adjust the CCT selection switch to your preferred setting. Reinstall the downlight and restore power.
Image 9: Close-up of the selectable color temperature switch located within the remote junction box.
7. Onderhoud
The NICOR DGC43120SRDWH LED downlight requires minimal maintenance.
- Skoonmaak: Maak seker dat die krag afgeskakel is voor skoonmaak. Vee die toestel af met 'n sagte, droë of effens droë lap.amp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electrical components.
- Gloeilamp vervanging: The LED light source is integrated and not user-replaceable. If the LED fails, the entire fixture should be replaced.
8. Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Lig skakel nie aan nie. | Geen krag aan die armatuur nie. Los bedrading konneksie. Faulty fixture. | Kontroleer die stroombreker en muurskakelaar. Verifieer dat alle draadverbindings stewig is (met die krag afgeskakel). Contact customer support if wiring is correct and power is present. |
| Lig flikker of dof onbehoorlik. | Onversoenbare dimmerskakelaar. Los bedrading. Kragstuwing. | Ensure dimmer is a compatible TRIAC LED dimmer. Kontroleer die bedrading (met die krag afgeskakel). Consider installing surge protection. |
| Verkeerde kleurtemperatuur. | CCT-skakelaar verkeerd gestel. | Turn off power, access junction box, and adjust CCT switch. |
9. Spesifikasies
| Eienskap | Waarde |
|---|---|
| Handelsmerk | Nicor |
| Modelnommer | DGC43120SRDWH |
| Tipe toebehore | Canless Downlight |
| Grootte | 4 duim |
| Kleur | Wit |
| Materiaal | Aluminium, plastiek |
| Ligbron | LED |
| Wattage | 8.7 watt |
| Helderheid | 805 Lumen (over 715 Lumens stated in features) |
| Voltage | 120 Volt |
| Ligte kleur (CCT) | 2700K - 5000K (Selectable) |
| CRI | 97 (R9 value over 70) |
| Straalhoek | 33° |
| Kantelverstelling | 25° |
| Rotasie-aanpassing | 360° |
| Verduistering | Dimmable to less than 5% (TRIAC LED Dimmers) |
| Installasie tipe | Ingeboude montering, kanloos |
| Binne/buiteluggebruik | Binneshuise |
| Waterweerstandvlak | Not Water Resistant (Wet location rated for housing) |
| Item gewig | 1 pond |
| UPC | 767706195767 |
Image 10: Dimensional drawing showing the measurements of the downlight and its remote junction box.
10. Waarborginligting
This NICOR DGC43120SRDWH downlight is protected by NICOR’s 5-Year Limited System Warranty.
Belangrike notas:
- Vir installasies waar kragstuwing moontlik is, beveel NICOR aan om bykomende oplewingbeskerming by die elektriese verspreidingspaneel te installeer.
- Die waarborg dek nie produkonderbreking as gevolg van 'n oorvol nietage gebeurtenis (kragstuwing).
11. Ondersteuning en Kontak
If you have any questions, require technical assistance, or need to report an issue with your NICOR DGC43120SRDWH downlight, please contact NICOR customer support. Refer to the product packaging or the official NICOR webwebwerf vir die mees onlangse kontakinligting.
