Reloop RT-1 BT Turntable User Manual

1. Inleiding en oorview

The Reloop RT-1 BT is a versatile belt-drive turntable designed for both aspiring DJs and Hi-Fi enthusiasts. It combines classic vinyl playback with modern wireless convenience, featuring integrated Bluetooth for seamless connection to compatible speakers. Its robust construction, including a sturdy chassis and precision-cast platter, ensures stable and distortion-free audio reproduction. The turntable comes equipped with a pre-assembled Ortofon OM Black magnetic pickup system and an integrated phono pre-amplifier, offering flexibility for various audio setups.

2. Veiligheidsinstruksies

Please read and understand all safety instructions before operating the Reloop RT-1 BT turntable. Retain this manual for future reference.

• Kragtoevoer: Gebruik slegs die meegeleverde kragadapter. Maak seker die volume istage matches your local power supply. Disconnect power during thunderstorms or when unused for extended periods.
• Water en vog: Do not expose the unit to rain, moisture, or liquids. Avoid placing objects filled with liquids, such as vases, on or near the turntable.
• Ventilasie: Ensure adequate ventilation. Do not block ventilation openings. Install the unit according to the manufacturer's instructions.
• Hitte: Moenie naby enige hittebronne soos verkoelers, hitteregisters, stowe of ander toerusting (insluitend ampversterkers) wat hitte produseer.
• Skoonmaak: Maak slegs skoon met 'n droë lap. Vermy die gebruik van vloeibare of aërosol skoonmaakmiddels.
• Diens: Moenie probeer om hierdie produk self te diens nie. Verwys alle diens na gekwalifiseerde dienspersoneel. Diens is nodig wanneer die apparaat op enige manier beskadig is, soos wanneer die kragtoevoerkoord of prop beskadig is, vloeistof gemors is of voorwerpe in die apparaat geval het, die apparaat aan reën of vog blootgestel is, nie normaal werk nie, of laat val is.
• Plasing: Place the turntable on a stable, level surface to prevent vibrations and ensure proper operation.

3. Pakketinhoud

Carefully unpack your Reloop RT-1 BT turntable and verify that all the following components are included:

• Reloop RT-1 BT Turntable Unit
• Aluminiumbord
• Belt Drive (pre-installed or separate)
• Reloop OM Black Pickup System (by Ortofon, pre-assembled on headshell)
• Kopdop
• Gevoel Mat
• Dust Cover (removable acrylic)
• Teengewig
• Audio Cable (RCA)
• Center Adapter (for 45 RPM records)
• Kragtoevoer Eenheid
• Instruksie Handleiding

4. Opstelling

Follow these steps to set up your Reloop RT-1 BT turntable for the first time.

4.1 Uitpak en plasing

1. Verwyder alle komponente versigtig uit die verpakking.
2. Place the turntable unit on a stable, level surface away from direct sunlight, heat sources, and excessive dust.

4.2 Skottel- en bandinstallasie

1. Place the aluminum platter onto the spindle of the turntable.
2. If the belt is not pre-installed, carefully loop the drive belt around the motor pulley and the inner rim of the platter.
3. Plaas die viltmat bo-op die bord.

Image: The Reloop RT-1 BT turntable with its aluminum platter and S-shaped tonearm, highlighting the universal SME connection and cast platter.

4.3 Toonarm- en patroonopstelling

1. The Ortofon OM Black pickup system is pre-assembled on the headshell. Attach the headshell to the tonearm.
2. Install the counterweight onto the rear of the tonearm. Adjust it to balance the tonearm horizontally. Refer to the Ortofon manual for precise tracking force settings (typically 1.5-2.0 grams for OM Black).
3. Adjust the anti-skating dial to match the tracking force setting.

Image: The Reloop RT-1 BT turntable shown with its removable acrylic dust cover and the included Reloop OM Black pickup system by Ortofon.

4.4 Oudioverbindings

The RT-1 BT features an integrated phono pre-amplifier, allowing you to connect it directly to a line-level input on your amplifier or active speakers. You can also use the PHONO output if your amplifier has a dedicated phono input.

1. Connect the RCA audio cable from the turntable's output to the appropriate input on your ampverligter of aangedrewe luidsprekers.
2. Select either PHONO or LINE output using the switch on the rear panel, depending on your ampdie leweraar se insette.

Beeld: Agter view of the Reloop RT-1 BT turntable, illustrating the integrated phono pre-amplifier and its output connections.

4.5 Kragverbinding

1. Connect the power supply unit to the DC input on the turntable.
2. Steek die kragadapter in 'n geskikte muuraansluiting.

5. Bedryfsinstruksies

This section details how to operate your Reloop RT-1 BT turntable.

5.1 Speel 'n plaat

1. Place a record on the felt mat. For 7-inch records, use the included center adapter.
2. Select the correct speed (33 1/3 RPM for LPs, 45 RPM for singles) using the speed selector switch.
3. Druk die START/STOP-knoppie om die rotasie van die skottel te begin.
4. Gently lift the tonearm using the cueing lever and position the stylus over the desired groove of the record.
5. Lower the cueing lever to slowly drop the stylus onto the record.
6. To stop playback, lift the tonearm using the cueing lever, return it to the tonearm rest, and press the START/STOP button.

Image: Close-up of the Reloop RT-1 BT turntable's controls, featuring the precise pitch adjustment slider (+/-10%) and the two-speed selector (33 1/3 & 45 RPM).

5.2 Pitch Adjustment

Use the pitch slider to fine-tune the playback speed by +/-10% for precise beat matching or personal preference.

5.3 Bluetooth-konnektiwiteit

The RT-1 BT allows wireless audio streaming to Bluetooth-enabled speakers or stereo systems.

1. Ensure your Bluetooth speaker or receiver is in pairing mode.
2. Press and hold the Bluetooth pairing button on the RT-1 BT (refer to the diagram in your quick start guide for exact location). The Bluetooth indicator light will flash.
3. Once successfully paired, the indicator light will remain solid. Audio from the turntable will now stream wirelessly to your connected device.

Image: The Reloop RT-1 BT turntable demonstrating smart connectivity, wirelessly streaming audio to two Bluetooth speakers.

6. Onderhoud

Regular maintenance will help ensure the longevity and optimal performance of your turntable.

• Maak die eenheid skoon: Use a soft, dry, lint-free cloth to wipe the turntable chassis and dust cover. Avoid abrasive cleaners or solvents.
• Stylus sorg: Periodically clean the stylus using a soft brush designed for stylus cleaning, brushing gently from back to front. A dirty stylus can degrade sound quality and damage records.
• Stofbedekking: Keep the dust cover closed when the turntable is not in use to protect it from dust and debris.
• Band inspeksie: Occasionally inspect the drive belt for signs of wear, stretching, or cracking. Replace the belt if necessary to maintain accurate speed.

7. Probleemoplossing

If you encounter issues with your Reloop RT-1 BT, refer to the following common problems and solutions.

If the problem persists after trying these solutions, please contact Reloop customer support or your retailer.

8. Spesifikasies

9. Waarborg en Ondersteuning

For warranty information, please refer to the warranty card included with your product or visit the official Reloop website. For technical support, troubleshooting beyond this manual, or service inquiries, please contact your authorized Reloop dealer or Reloop customer service directly. Keep your proof of purchase for warranty claims.