NERF Pro Gelfire X MrBeast Full Auto Blaster Instruction Manual

Veiligheidsinligting

Please read and understand all safety warnings before operating the NERF Pro Gelfire X MrBeast Blaster. Failure to follow these instructions may result in injury.

• Ages 14 and up: This product is intended for users aged 14 and older. It is not a toy.
• Oogbeskerming: Always wear the provided protective eyewear for players and people within range. Do not aim at eyes or face.
• Official GelFire Rounds: Use only official NERF GelFire Rounds. Using unofficial rounds may cause damage to the blaster or injury.
• Hidrasie: Use only clean tap water to hydrate rounds. Do not freeze or modify rounds.
• Blaster Modification: Do not modify the blaster in any way. Unauthorized modifications can affect performance and safety.
• Impak: Impact from rounds may cause temporary marks on skin.
• Batteryveiligheid: Risk of Fire and Burns. Do Not Open, Crush, Heat Above 45°C, or Incinerate the battery. Follow Manufacturer's Instructions.
• Gel Rounds: Do not eat gel rounds. Keep away from pets. Rounds may stain certain surfaces.
• Laai: Requires a USB-A wall charger (not included) for the rechargeable battery.

Wat is ingesluit

Your NERF Pro Gelfire X MrBeast Blaster package includes the following components:

• NERF Pro Gelfire X MrBeast Blaster
• 300-round capacity hopper
• 20,000 dehydrated Nerf Pro Gelfire soft super absorbent polymer projectiles (gel rounds)
• Removable barrel attachment
• Extendable stock
• Beskermende bril
• Easy slide-in slide-out rechargeable battery
• Universal USB-A to USB-C charging cable

Opstelling

1. Hydrating Gel Rounds

The Nerf Pro Gelfire rounds come dehydrated. To prepare them for use:

1. Pour the dehydrated gel rounds into a large container.
2. Add clean tap water, ensuring the rounds are fully submerged.
3. Allow the rounds to soak for approximately 3-4 hours until they expand to their full size (about 7.5mm).
4. Drain any excess water before loading them into the hopper.

2. Die installering van die battery

The blaster uses a removable rechargeable Lithium Polymer battery.

1. Vind die batterykompartement op die blaster.
2. Plaas die volledig gelaaide battery in die kompartement en maak seker dat dit stewig vasklik.
3. Maak die batterykompartement se deksel toe.

3. Attaching the Hopper

The blaster features a 300-round capacity hopper.

1. Maak die bakdeksel oop.
2. Carefully pour the hydrated gel rounds into the hopper.
3. Maak die deksel van die houer stewig toe.
4. Attach the loaded hopper to the designated slot on top of the blaster.

4. Attaching/Removing the Barrel and Stock

Customize your blaster with the removable barrel and extendable stock.

• Vat: Align the removable barrel with the front of the blaster and push until it locks into place. To remove, press the release button (if applicable) and pull the barrel off.
• Voorraad: The stock can be extended or collapsed by pulling or pushing it. It can also be removed for a more compact setup.

Bedryfsinstruksies

1. Aanskakeling en moduskeuse

The blaster offers both full-auto and semi-auto firing modes.

1. Ensure the battery is installed and charged.
2. Locate the mode selector switch (often a dial or lever).
3. Select your desired firing mode: Vol-outomaties for continuous firing (up to 10 rounds per second) or Semi-outo for single shots.

2. Die afvuur van die blaster

Once the blaster is set up and a mode is selected:

1. Aim at your target, ensuring no eyes or faces are in the line of fire.
2. Pull the trigger to fire.

3. Snellerslot

For safety, always engage the trigger lock when the blaster is not in active use.

• Locate the trigger lock mechanism (refer to the product diagram).
• Slide the lock into the engaged position to prevent accidental firing.

4. Amptelike Produkvideo

Onderhoud

1. Skoonmaak

• After use, ensure all gel rounds are removed from the hopper and blaster.
• Wipe down the exterior of the blaster with a damp cloth. Do not submerge the blaster in water.
• Periodically check the barrel for any obstructions and clear them carefully.

2. Berging

• Store the blaster in a cool, dry place away from direct sunlight.
• Remove the battery from the blaster if it will not be used for an extended period.
• Store hydrated gel rounds in an airtight container with a small amount of water to prevent dehydration.

Probleemoplossing

If you encounter issues with your blaster, refer to the following table:

Spesifikasies

Waarborg en Ondersteuning

For warranty information, product support, or to purchase replacement parts and additional gel rounds, please visit the official Nerf website or contact Hasbro customer service.

Bewaar u bewys van aankoop vir enige waarborgaansprake.

Aanlyn ondersteuning: Besoek die Nerf Winkel op Amazon