1. Inleiding
This manual provides comprehensive instructions for the safe and efficient operation of your U.S. Solid Precision Lab Scale. Please read this manual thoroughly before use and retain it for future reference. This analytical balance is designed for precise weighing in laboratory, industrial, and educational settings, offering a capacity of 5000g with 0.01g readability.
2. Veiligheidsmaatreëls
- Always operate the scale on a stable, level, and vibration-free surface.
- Vermy die blootstelling van die skaal aan uiterste temperature, humiditeit of direkte sonlig.
- Do not overload the scale beyond its maximum capacity of 5000g.
- Keep the weighing pan clean and free from debris.
- Gebruik slegs die meegeleverde kragadapter.
- Avoid sudden impacts or dropping the scale.
3. Opstelling en installering
3.1 Uitpak
Carefully remove the scale and all accessories from the packaging. Verify that all components listed in the packing list are present. The package should include the scale, stainless steel weighing pan, and power adapter.
3.2 Plasing
Place the scale on a firm, level surface away from drafts, vibrations, and direct heat sources. Ensure adequate space around the scale for operation and ventilation.
3.3 Nivellering van die skaal
The scale must be perfectly level for accurate measurements. Use the adjustable feet at the bottom of the scale and the bubble level indicator to achieve proper leveling.
Beeld: Voorkant view of the U.S. Solid Precision Lab Scale, showing the bubble level indicator on the left side of the display panel.
Image: Diagram illustrating how to adjust the leveling feet until the bubble is centered, ensuring proper horizontal adjustment for accuracy.
3.4 Power Connection and Warm-up
Connect the provided power adapter to the scale and then to a suitable power outlet. For optimal accuracy, allow the scale to warm up for at least 30 minutes after connecting to power or after a power loss before performing any measurements.
Video: This video demonstrates the initial setup of the U.S. Solid Precision Lab Scale, including connecting the power supply and the recommended 30-minute warm-up period for optimal performance.
4. Bedryfsinstruksies
4.1 Basiese Weeg
- Druk die AAN/AF knoppie om die skaal aan te skakel.
- Wait for the display to show "0.00g".
- Place the item to be weighed on the center of the stainless steel pan.
- Lees die stabiele gewig wat op die LCD-skerm vertoon word.
4.2 Eenheid Omskakeling
The scale supports 19 measurement units. Press the EENHEID button to cycle through the available units (g, kg, ct, T, TAR, dr, PKT, GN, TMR, gsm, tlJ, mo, dwt, oz, lb, tlT, ozt, tlH, %).
Image: Visual representation of the 19 different measurement units supported by the U.S. Solid Precision Lab Scale, including grams, kilograms, carats, and more.
4.3 Tarrafunksie
To subtract the weight of a container, place the empty container on the pan and press the TARA/KAL button. The display will reset to "0.00g". You can then add the item to be weighed into the container, and only the net weight of the item will be displayed.
4.4 Piece Counting Function
The scale can count pieces of uniform weight. To use this function:
- Plaas asample quantity (e.g., 10, 20, 50, 100, 150, 200, 250, or 500 pieces) of the items to be counted on the pan.
- Druk en hou die COU button until "PCS" appears on the display.
- Gebruik die EENHEID knoppie om die s te kiesample quantity that matches the number of items on the pan.
- Druk TARA/KAL to confirm. The display will now show the number of pieces.
- Add more items to the pan, and the scale will display the total count.
Image: Illustration of the piece counting feature, demonstrating how to set sample sizes (10, 20, 50, etc.) for accurate item counting.
4.5 Agterlig-instelling
To adjust the backlight behavior:
- Druk die COU button to choose between C0-OFF, C0-1, or C0-5.
- C0-OFF: Backlight is always on.
- C0-1: Backlight will turn off after 1 second of inactivity.
- C0-5: Backlight will turn off after 5 seconds of inactivity.
- Ten slotte, klik tarra until the program ends and returns to 0.00.
Video: This segment demonstrates how to adjust the backlight settings of the scale, allowing users to choose between always-on, 1-second, or 5-second inactivity timeouts for the backlight.
4.6 Unit Package Locking
To lock specific unit packages for quick access:
- Druk en hou die COU button. Release it when "C0-OFF" is displayed.
- Klik tarra to choose C06-1.
- Druk die COU button to cycle through C06-1, C06-2, up to C06-16, each representing a different combination of units.
- Ten slotte, klik tarra until the program ends and returns to 0.00.
Video: This segment illustrates how to lock specific unit packages on the scale, allowing users to customize and quickly switch between preferred sets of measurement units.
5. RS232 Interface Communication
The U.S. Solid Precision Lab Scale features an RS232 interface for connecting to a computer or printer, enabling serial data exchange. This allows for data logging and integration with other systems.
Beeld: Sykant view of the U.S. Solid Precision Lab Scale, highlighting the RS232 interface port for external connectivity.
5.1 Key Output Mode Setting (C5-2)
In Key Output Mode, the scale sends weighing data to the connected device only when the EENHEID knoppie gedruk word.
- Druk en hou die COU button. Release it when "C0-OFF" is displayed.
- Klik tarra to choose C5-0.
- Druk die COU button to choose C5-2.
- Ten slotte, druk die tarra button to enter into key output mode.
- To output data, open "Uartassist" software (or similar serial terminal software), set Serial Port to COM3, Baud Rate to 9600, Data Bits to 8, Parity to None, and Stop Bits to One. Click "Open serial port".
- Elke keer as u op die EENHEID button on the scale, the computer will output the current weighing data.
Video: This segment demonstrates how to set the scale to "Key Output" mode (C5-2) for USB interface testing. It shows connecting the scale to a computer and manually triggering data output by pressing the UNIT button.
5.2 Continuous Output Mode Setting (C5-0)
In Continuous Output Mode, the scale continuously sends weighing data to the connected device without requiring manual input.
- Druk en hou die COU button. Release it when "C0-OFF" is displayed.
- Klik tarra to choose C5-0.
- Ten slotte, druk die tarra button to enter into continuous output mode.
- With "Uartassist" software (or similar serial terminal software) open and configured (COM3, 9600 baud, 8 data bits, no parity, one stop bit), click "Open serial port". The weighing results will be continuously output on the computer.
Video: This segment demonstrates how to set the scale to "Continuous Output" mode (C5-0) for USB interface testing. It shows the scale continuously sending weighing data to a connected computer.
6. Kalibrasie
Regular calibration ensures the accuracy of your scale. The scale supports manual calibration.
- Ensure the scale is on a stable surface and has completed its warm-up period.
- With the scale displaying "0.00g", press and hold the TARA/KAL button until "CAL" appears.
- The display will then show a flashing weight value (e.g., "2000g"). This is the required calibration weight.
- Carefully place the specified calibration weight onto the center of the pan.
- Wait for the display to stabilize and show "PASS" or return to "0.00g".
- Remove the calibration weight. The scale is now calibrated.
Image: Diagram illustrating the calibration process, emphasizing the need to recalibrate after moving the balance or before use, and to hold the TARE/CAL button for instructions.
7. Onderhoud en versorging
- Skoonmaak: Vee die buitekant van die skaal af met 'n sagte, damp cloth. Do not use abrasive cleaners or immerse the scale in water. The stainless steel pan can be removed for separate cleaning.
- Berging: When not in use for extended periods, store the scale in a dry, dust-free environment.
- Inspeksie: Kontroleer die kragkabel gereeld vir enige skade.
8. Probleemoplossing
| Probleem | Moontlike oorsaak | Oplossing |
|---|---|---|
| Skaal skakel nie aan nie | No power, faulty adapter, or power outlet issue. | Check power connection, try a different outlet, ensure adapter is functional. |
| Onakkurate lesings | Not level, drafts, vibrations, not warmed up, needs calibration, or overloaded. | Level the scale, move to a stable location, allow warm-up, perform calibration, ensure weight is within capacity. |
| Display shows "O-Ld" | Oorlading. | Verwyder oortollige gewig onmiddellik om skade te voorkom. |
| RS232 kommunikasie mislukking | Incorrect port settings, cable issue, or wrong output mode. | Verify COM port, baud rate, data bits, parity, and stop bits. Check cable connection. Ensure correct output mode (Key or Continuous) is selected. |
9. Spesifikasies
- Handelsmerk: VSA Solid
- Model: 5000g x 0.01g Analytical Balance
- Kapasiteit: 5000 gram (5 kg)
- Leesbaarheid: 0.01 Grams (10 mg)
- Vertoon tipe: LCD met agterlig
- Interface: RS232
- Meeteenhede: 19 units (g, kg, ct, T, TAR, dr, PKT, GN, TMR, gsm, tlJ, mo, dwt, oz, lb, tlT, ozt, tlH, %)
- Aansoeke: Check-weighing, Tare, Piece Counting, Manual Calibration, Overload Protection
- Materiaal: ABS behuising en vlekvrye staal pan
- Produk afmetings: 8.9 x 8.7 x 3.2 duim
- Item gewig: 2.9 pond
- Krag: AC-adapter (ingesluit)
10. Waarborg en Ondersteuning
For warranty information and technical support, please refer to the warranty card included with your product or visit the official U.S. Solid webwebwerf. Bewaar u aankoopbewys as bewys van aankoop.
Kontakinligting: Verwys asseblief na die vervaardiger se amptelike website or contact details provided in the product packaging for support.