JEYI I9-Seal

JEYI I9-Seal M.2 NVMe SSD Enclosure User Manual

Model: I9-Seal

Inleiding

This manual provides comprehensive instructions for the installation, operation, and maintenance of your JEYI I9-Seal M.2 NVMe SSD Enclosure. This device converts an NVMe M.2 solid-state drive into a portable external storage solution with high-speed USB 3.2 Gen 2 connectivity.

Pakketinhoud

Verifieer asseblief dat al die items wat hieronder gelys word, in u pakket ingesluit is:

  • JEYI M.2 NVMe SSD Enclosure
  • Termiese kussings
  • Skroewedraaier
  • USB-A to USB-C Cable (10Gbps)
  • USB-C to USB-C Cable (10Gbps)
  • Lanyard
JEYI I9-Seal M.2 NVMe SSD Enclosure package contents
Image: Contents of the JEYI I9-Seal M.2 NVMe SSD Enclosure package, showing the enclosure, two cables, thermal pads, a screwdriver, and a lanyard.

Opstel instruksies

Follow these steps to install your NVMe M.2 SSD into the JEYI I9-Seal enclosure:

  1. Berei die omhulsel voor: Gently slide open the enclosure to reveal the internal PCB.
  2. Dien termiese kussing toe: Peel off the protective films from both sides of a thermal pad and carefully place it onto the NVMe SSD chip area. This aids in heat dissipation.
  3. Insert NVMe SSD: Align your NVMe M.2 SSD (2280 form factor only) with the M-Key slot on the PCB. Insert the SSD firmly but gently into the slot at an angle.
  4. Beveilig die SSD: Once inserted, gently push down the SSD and secure it with the provided screw using the included screwdriver. Ensure the SSD is flat and securely fastened.
  5. Maak die omhulsel toe: Carefully slide the enclosure cover back into place until it clicks securely.
Ontplof view of JEYI I9-Seal M.2 NVMe SSD Enclosure showing internal components and thermal pad placement
Image: An exploded diagram illustrating the internal structure of the enclosure, including the aluminum alloy case, heat dissipation shell, thermal pad, and screw, demonstrating how to assemble the SSD within the enclosure.
Diagram showing compatibility with M.2 2280 NVMe SSDs only
Image: A visual guide indicating that the enclosure is compatible exclusively with M.2 2280 NVMe SSDs, with other sizes (2230, 2242, 2260) marked as incompatible.

Bedryfsinstruksies

Once your NVMe SSD is securely installed, connect the enclosure to your device:

  1. Koppel aan toestel: Use either the provided USB-C to USB-C cable or the USB-A to USB-C cable to connect the enclosure to a compatible USB port on your computer, smartphone, tablet, or game console.
  2. Kragaanwyser: A small LED indicator on the enclosure will illuminate, signifying that the device is powered on and connected.
  3. Disk Recognition: Your operating system (Windows, macOS, Linux, Android, iOS) should automatically detect the new storage device. If it's a new SSD, you may need to initialize and format it through Disk Management (Windows) or Disk Utility (macOS) before use.
  4. Data-oordrag: You can now perform data backup, file transfers, disk upgrades, data recovery, or use it for storage expansion. The enclosure supports USB 3.2 Gen 2 speeds up to 10Gbps.
JEYI I9-Seal M.2 NVMe SSD Enclosure connected to various devices like laptop, smartphone, and tablet
Image: The JEYI I9-Seal enclosure connected to a laptop, smartphone, and tablet, demonstrating its wide compatibility with Windows, Linux, and Mac OS 8.0 and above systems, including Thunderbolt compatibility.
Comparison of USB data transfer speeds, highlighting 10Gbps for USB 3.2 Gen 2
Image: A graphic illustrating data transfer speeds, showing USB 2.0 at 480Mbps, USB 3.0 (USB 3.2 Gen 1) at 5Gbps, and USB 3.1 (USB 3.2 Gen 2) at 10Gbps, emphasizing the enclosure's high-speed capability for NVMe drives.

Onderhoud

To ensure optimal performance and longevity of your JEYI I9-Seal enclosure:

  • Hittebestuur: Die aluminium casing and thermal pads are designed for efficient heat dissipation. During prolonged high-speed data transfers, the enclosure may become warm to the touch. This is normal and indicates effective heat transfer from the SSD.
  • Skoonmaak: Gebruik 'n sagte, droë lap om die buitekant van die omhulsel skoon te maak. Vermy die gebruik van vloeibare skoonmaakmiddels of oplosmiddels.
  • Berging: Wanneer dit nie gebruik word nie, bêre die omhulsel op 'n koel, droë plek weg van direkte sonlig en uiterste temperature.
  • Kabelversorging: Handle the USB cables carefully. Avoid sharp bends or excessive pulling to prevent damage.

Probleemoplossing

ProbleemMoontlike oorsaakOplossing
Enclosure not detected by computer.
  • Los kabelverbinding.
  • SSD nie behoorlik geïnstalleer nie.
  • SSD nie geïnisialiseer/geformateer nie.
  • Faulty USB port or cable.
  • Maak seker dat kabels veilig verbind is.
  • Re-open enclosure and verify SSD is seated correctly and screwed in.
  • Check Disk Management (Windows) or Disk Utility (macOS) to initialize and format the SSD.
  • Probeer 'n ander USB-poort of -kabel.
Stadige data-oordragspoed.
  • Connected to a slower USB port (e.g., USB 2.0).
  • Thermal throttling due to high temperature.
  • SSD-prestasiebeperkings.
  • Connect to a USB 3.2 Gen 2 (10Gbps) compatible port.
  • Ensure thermal pads are correctly installed. Allow the enclosure to cool if it becomes excessively hot.
  • Verify your NVMe SSD's rated speed.
Enclosure gets very hot.
  • Normale werking tydens swaar data-oordrag.
  • Ineffective thermal pad contact.
  • This is expected as the aluminum casing versprei hitte.
  • Ensure thermal pads are correctly positioned and making good contact with the SSD and enclosure.

Spesifikasies

KenmerkDetail
ModelI9-Seal
HandelsmerkJEYI
Hardeware-koppelvlakUSB 3.2 Gen 2 (USB-C)
Data-oordragtempoTot 10 Gbps
Compatible SSD TypeNVMe M.2 (PCI-E M-Key)
Supported SSD Form Factor2280 (80mm) only
Maksimum bergingskapasiteit4 TB
ChipsetJMS583 A3
KenmerkeUASP Support, TRIM Support, Win to Go (WTG) Support
MateriaalAluminiumlegering
KleurSilwer
Produk afmetings4.06 x 1.02 x 0.39 duim (103 x 26 x 10 mm)
Item gewig0.317 onse (9 gram)
Versoenbare bedryfstelselsWindows, macOS, Linux, iOS, Android
Diagram of the JMS583 A3 master chip
Image: A detailed illustration of the JMS583 A3 master chip, which is integrated into the enclosure for stable and high-speed data transmission up to 10Gbps.

Waarborg en Ondersteuning

For warranty information or technical support, please refer to the official JEYI webwebwerf of kontak hul kliëntediens direk. Besonderhede rakende spesifieke waarborgtydperke en ondersteuningskanale word tipies saam met u aankoopdokumentasie of op die vervaardiger se webwebwerf.

Vervaardiger: JEYI

Webwebwerf: Visit the JEYI Store on Amazon

© 2025 JEYI. All rights reserved.