BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light

Inleiding

This manual provides detailed instructions for the safe installation, operation, and maintenance of your BLNAN 8.7 Inch Wired Motion Sensor LED Ceiling Light. Please read this manual thoroughly before installation and retain it for future reference.

Produk Kenmerke

• Geïntegreerde bewegingsensor: Built-in PIR infrared motion detector with a 120° detection angle and a range of 10ft (semidiameter).
• Adjustable Hold Time: Selectable light-on duration of 30 seconds, 120 seconds, or 180 seconds after motion detection.
• Drie bedryfsmodusse:
  • OUTO-modus: Light activates when motion is detected in dark conditions.
  • AAN-modus: Light remains constantly on.
  • G-modus: Light activates when motion is detected in both daytime and nighttime conditions.
• Drie kleurtemperature: Selectable color temperatures of 3000K (Warm White), 4000K (Neutral White), and 5000K (Cool White) via a toggle switch before installation.
• Ultra-dun ontwerp: Lae profile design with a diameter of 8.7 inches and a thickness of 0.99 inches, suitable for various spaces.
• Veelsydige installasie: Can be installed as a flush mount on ceilings or walls.

Figure 1: Illustration of the three operating modes (AUTO, ON, G) and their activation conditions.

Figure 2: Detail of the color temperature toggle switch and motion sensor on the light fixture.

Pakketinhoud

Verifieer dat alle komponente teenwoordig is voordat u met die installasie begin:

• 1x Corded Motion Activated Ceiling Light
• 1x Mounting Hardware Package (screws, wire nuts, plastic bracket)
• 1x Instruksiehandleiding (hierdie dokument)

Figure 3: Contents of the BLNAN Motion Sensor LED Ceiling Light package.

Veiligheidsinligting

WAARSKUWING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing. Consult a qualified electrician if you are unsure about electrical wiring. Always follow local electrical codes.

• Ensure the power supply is OFF before handling any wiring.
• This fixture is designed for 120V AC power supply.
• Moenie probeer om die toebehore te wysig nie.
• Hou kinders weg van die installasie area.

Opstelling en installasie

Volg hierdie stappe vir behoorlike installasie:

1. Berei voor vir installasie:
   • Turn off power at the circuit breaker before starting.
   • Before mounting, select your desired color temperature (3000K, 4000K, or 5000K) using the toggle switch located on the back of the fixture.
2. Installeer montagebeugel:
   • Rotate and remove the plastic mounting bracket from the light fixture.
   • Attach the plastic bracket to your existing junction box using the provided screws. The bracket is designed for junction boxes with 2.75"-3.7" apart screw holes.
3. Draadverbindings:
   • Connect the wires from the light fixture to your household wiring: Black to Black (Live), White to White (Neutral), and Green to Green/Bare Copper (Ground). Secure connections with wire nuts.
   • Use the hanging rope to temporarily support the fixture during wiring.
4. Monteer die ligtoestel:
   • Steek alle drade versigtig in die aansluitkas.
   • Align the light fixture with the installed mounting bracket and rotate it clockwise until it locks securely into place.
5. Herstel krag: Skakel die krag weer aan by die stroombreker.

Figuur 4: Visuele gids vir die installasieproses.

Bedryfsinstruksies

The light fixture features adjustable settings for operating mode and hold time. These settings are controlled by small switches located near the motion sensor on the fixture's surface.

1. Kies bedryfsmodus:
   • Locate the mode switch (labeled AUTO, ON, G).
   • Slide the switch to your desired mode:
   • VOERTUIG: Motion and light sensor activated. Light turns on only when motion is detected in dark conditions.
   • OP: Light remains continuously on, regardless of motion or ambient light.
   • G: Motion sensor activated. Light turns on when motion is detected, both during the day and at night.
2. Adjusting Hold Time:
   • Locate the hold time switch (labeled 30S, 120S, 180S).
   • Slide the switch to set how long the light remains on after motion is no longer detected:
   • 30S: 30 sekondes
   • 120S: 120 sekondes (2 minute)
   • 180S: 180 sekondes (3 minute)

Figure 5: Switches for adjusting hold time and operating modes.

Onderhoud

Regular maintenance ensures optimal performance and longevity of your LED ceiling light.

• Skoonmaak: Turn off power before cleaning. Use a soft, dry cloth to wipe the fixture. Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• LED-leeftyd: Die geïntegreerde LED-ligbron het 'n gemiddelde lewensduur van 20 000 uur en is nie deur die gebruiker vervangbaar nie.
• Inspeksie: Kontroleer die toebehore gereeld vir enige tekens van skade of los verbindings. Indien enige probleme gevind word, ontkoppel die krag en raadpleeg 'n gekwalifiseerde elektrisiën.

Probleemoplossing

As jy probleme met jou ligte ondervind, raadpleeg die volgende algemene probleme en oplossings:

Spesifikasies

Waarborg en Ondersteuning

For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official BLNAN webwebwerf. Bewaar u aankoopbewys as bewys van aankoop.