WET AC7406

ACT USB-C 90-grade kabel 1M gebruikershandleiding

Model: AC7406

Produk verbyview

The ACT USB-C 90-Degree Cable (Model AC7406) is designed for connecting USB-C enabled devices, offering both high-speed data transfer and efficient power delivery. This 1-meter cable features one straight USB-C connector and one convenient 90-degree angled USB-C connector, reducing strain and improving usability in tight spaces. It supports USB 3.2 Gen1 for data transfer speeds up to 5Gbps and Power Delivery (PD) up to 60W, making it suitable for charging smartphones, tablets, and even some laptops. Additionally, it supports DisplayPort Alternate Mode for video output.

Image: The ACT USB-C 90-degree cable, showcasing its straight and angled connectors.

Opstel instruksies

To set up your ACT USB-C 90-Degree Cable, follow these simple steps:

Identifiseer poorte: Locate the USB-C ports on your devices (e.g., laptop, smartphone, external monitor, power adapter).
Koppel aan Toestel 1: Insert either the straight or the 90-degree angled USB-C connector into the USB-C port of your primary device (e.g., laptop for data transfer, power adapter for charging). The 90-degree connector is ideal for devices where space is limited or to prevent cable bending.
Koppel aan Toestel 2: Insert the other end of the cable into the USB-C port of the secondary device (e.g., external hard drive, smartphone, monitor).
Verifieer verbinding: Ensure both connectors are fully inserted into their respective ports. The connection is reversible, so there is no "wrong" way to plug in a USB-C connector.

USB-C cable connected to laptop and external device

Image: The ACT USB-C cable connected to a laptop and an external device, demonstrating a typical setup for charging or data transfer.

USB-C cable connecting laptop to external monitor

Image: The ACT USB-C cable connecting a laptop to an external monitor, illustrating its capability for display output via DisplayPort Alternate Mode.

Operasie

Charging (Power Delivery up to 60W)

This cable supports USB Power Delivery (PD) up to 60W (20V@3A), allowing for fast charging of compatible devices. Connect one end of the cable to a USB-C power adapter and the other end to your device (smartphone, tablet, or laptop) to initiate charging. The cable automatically negotiates the optimal power profile met die gekoppelde toestelle.

Supported Power Delivery Profiles: 5.0V@3.0A, 9.0V@3.0A, 12.0V@3.0A, 15.0V@3.0A, 20.0V@3.0A.

Data Transfer (5Gbps)

The cable supports USB 3.2 Gen1 (formerly USB 3.0) for high-speed data transfer up to 5 Gigabits per second (Gbps). This is approximately 10 times faster than standard USB 2.0. To achieve these speeds, ensure both connected devices have USB 3.2 Gen1 or higher compatible USB-C ports.

Display Output (DisplayPort Alternate Mode)

The ACT USB-C cable supports DisplayPort Alternate Mode (DP Alt Mode), enabling video output from compatible USB-C devices to an external display. Connect your USB-C laptop or tablet to a monitor with a USB-C input or a USB-C to DisplayPort/HDMI adapter (not included) to extend or mirror your display.

Sorg en Onderhoud

Proper care of your cable will ensure its longevity and optimal performance:

Vermy skerp draaie: Do not bend the cable sharply, especially near the connectors, as this can damage internal wires.
Stoor behoorlik: When not in use, coil the cable loosely. Avoid tangling or knotting.
Hou verbindings skoon: Periodically inspect the USB-C connectors for dust or debris. Use a soft, dry cloth or a small brush to gently clean them if necessary.
Hanteer versigtig: Always pull from the connector housing, not the cable itself, when unplugging.
Vermy uiterste temperature: Do not expose the cable to extreme heat or cold, which can degrade the cable materials.

Image: The ACT USB-C cable coiled neatly, demonstrating proper storage to prevent damage.

Probleemoplossing

If you encounter issues with your ACT USB-C cable, refer to the following table for common problems and solutions:

Probleem	Moontlike oorsaak	Oplossing
Toestel laai nie of laai stadig.	Power adapter not powerful enough. Device not compatible with PD. Kabel nie volledig ingesit nie.	Ensure power adapter supports 60W PD. Verify device supports USB-C PD. Reconnect the cable firmly at both ends.
Stadige data-oordragspoed.	One or both devices use USB 2.0 ports. Kabel nie volledig ingesit nie.	Ensure both devices have USB 3.2 Gen1 (USB 3.0) compatible ports. Koppel die kabel weer stewig aan.
No display output to external monitor.	Source device does not support DP Alt Mode. Monitor does not support USB-C video input. Incorrect monitor input selected.	Check device specifications for DP Alt Mode support. Verify monitor's USB-C port supports video input. Select the correct input source on your monitor.

Tegniese spesifikasies

Handelsmerk	WET OP
Modelnommer	AC7406
Kabel tipe	USB-C na USB-C
Connector Tipe	One straight, one 90-degree angled USB-C (Male-to-Male)
Kabellengte	1 meter
Data-oordragtempo	Tot 5 Gbps (USB 3.2 Gen1)
Kraglewering	Up to 60W (20V@3A)
Spesiale kenmerke	Fast Charging, Data Transfer, DisplayPort Alternate Mode (DP Alt Mode)
Kleur	Swart
Sertifiserings	USB-IF-gesertifiseer

Waarborg en Ondersteuning

ACT is committed to delivering reliable connectivity solutions. All ACT products comply with international standards and EU legislation, ensuring high quality and safety.

Hierdie produk kom met 'n 2-5 year manufacturer's warranty. For specific warranty terms and conditions, please refer to the documentation included with your purchase or visit the official ACT webwebwerf.

For further support, technical assistance, or to view our full range of products, please visit the ACT Connectivity webwebwerf:

www.act-connectivity.com

Image: Product packaging for the ACT USB-C cable, showing the brand logo and webwebwerf vir ondersteuning.