AODELAN WTR-2 Wireless Timer Remote Shutter Release Instruction Manual

1. Inleiding

The AODELAN WTR-2 is a versatile wireless timer remote shutter release designed for Nikon cameras, specifically compatible with models using the N8 (MC-30) type connector. This device allows for both wireless and wired control of your camera's shutter, offering a wide range of functions for various photographic needs, including time-lapse, long exposure, and continuous shooting.

1.1 Pakketinhoud

Verifieer asseblief dat al die items wat hieronder gelys word in u pakket ingesluit is. Indien enige items ontbreek of beskadig is, kontak asseblief kliëntediens.

• WTR-2 Transmitter
• WTR-2 Receiver
• N8 Connection Cable (for Nikon MC-30 compatible cameras)
• Wrist Straps (2)
• Instruksie Handleiding

Image: All components included in the AODELAN WTR-2 package.

2. Veiligheidsinligting

To ensure safe and optimal operation of your AODELAN WTR-2, please read and adhere to the following safety guidelines:

• Keep the device away from water and moisture to prevent electric shock or malfunction.
• Moenie probeer om die toestel uitmekaar te haal of te wysig nie. Herstelwerk moet slegs deur gemagtigde dienspersoneel uitgevoer word.
• Vermy die blootstelling van die toestel aan uiterste temperature, direkte sonlig of hoë humiditeit.
• Gebruik slegs die gespesifiseerde batterytipe (AAA) en verseker die korrekte polariteit tydens installasie.
• Hou batterye buite bereik van kinders. Indien ingesluk, soek onmiddellike mediese hulp.
• Gooi gebruikte batterye weg volgens plaaslike regulasies.
• Maak die toestel skoon met 'n sagte, droë lap. Moenie harde chemikalieë of skuurmiddels gebruik nie.

3. Opstelling

3.1 Battery installasie

Both the WTR-2 Transmitter and Receiver require two AAA batteries each (not included). Ensure correct polarity when inserting the batteries.

1. Locate the battery compartment cover on the back of both the Transmitter and Receiver.
2. Skuif die deksel oop.
3. Insert two AAA batteries into each unit, matching the positive (+) and negative (-) terminals as indicated inside the compartment.
4. Maak die batterykompartement se deksel stewig toe.

Image: Battery compartments of the WTR-2 Transmitter and Receiver.

3.2 Verbinding met jou kamera

The WTR-2 Receiver connects to your Nikon camera via the N8 connection cable. This cable is designed for Nikon cameras compatible with the MC-30 type shutter release.

1. Maak seker jou kamera is afgeskakel.
2. Connect the 2.5mm jack end of the N8 cable to the receiver's input port.
3. Connect the 10-pin connector end of the N8 cable to the remote terminal port on your Nikon camera. This port is typically located on the side of the camera body.
4. Mount the receiver onto your camera's hot shoe (optional, for convenience) or attach it to a tripod or other accessory. The hot shoe connection is for mounting only and does not provide electrical connection for shutter release.
5. Turn on your camera and the WTR-2 Transmitter and Receiver.

Image: Connecting the N8 cable to a Nikon camera.

4. Operasie

The AODELAN WTR-2 offers two primary modes: Shutter Release Mode and Timer Mode. The transmitter features an LCD display with backlight for easy setting adjustments.

4.1 Aan-/afskakel

• To power on the Transmitter, press the AAN/AF knoppie.
• To power off the Transmitter, press and hold the AAN/AF knoppie vir 'n paar sekondes totdat die skerm afskakel.
• The Receiver has a power button on its side. Press it to turn on/off.

4.2 Shutter Release Functions

The WTR-2 can be used for basic shutter release operations, both wired and wirelessly.

• Halfdruk: Press the main shutter button on the transmitter halfway down to activate autofocus.
• Voldruk: Press the main shutter button fully down to trigger the camera's shutter.
• Slotfunksie: Slide the shutter button upwards to lock it in the fully pressed position for bulb photography or continuous shooting.

Image: Half-press for focus, full-press for shutter release.

The WTR-2 supports various shooting modes:

• Enkelskiet: Press the shutter button once for a single photo.
• Deurlopende skietery: Hold the shutter button down for continuous shots (camera setting dependent).
• Bulb Exposure: For exposures longer than 30 seconds, set your camera to Bulb mode. Press and hold the shutter button, or use the lock function on the transmitter, to keep the shutter open for the desired duration.
• 2-Second Delay: Use the 2S button on the transmitter for a 2-second delayed shutter release.

Image: Using the WTR-2 for Bulb exposure.

4.3 Timer Mode Functions (Intervalometer)

The WTR-2 excels in timed photography, offering precise control over delay, exposure, interval, and number of shots. Press the MODUS button to cycle through the timer settings.

Image: Timer settings on the WTR-2 LCD display.

1. Delay (DELAY): Sets the delay time before the first exposure. Range: 0s to 99h 59m 59s.
2. Long Exposure (LONG): Sets the exposure time for each shot. This is used in conjunction with your camera's Bulb mode for exposures longer than 30 seconds. Range: 0s to 99h 59m 59s.
3. Interval (INTVL): Sets the time between each exposure. Range: 1s to 99h 59m 59s.
4. Number of Exposures (N): Sets the total number of exposures to be taken. Range: 1 to 199, or unlimited (--).

Gebruik die pyltjie knoppies (UP/DOWN/LINKS/REGS) to navigate between settings and adjust values. Press STEL veranderinge te bevestig.

4.3.1 Time-Lapse Photography Example (Star Trails)

To capture star trails, you would typically use a combination of delay, long exposure, and interval settings.

Beeld: Bvample settings for star trail photography.

• Vertraging: 10 seconds (allows time to prepare).
• Lang blootstelling: 30 seconds (for each individual star trail segment).
• Interval: 10 seconds (time between exposures, allowing camera to process).
• Aantal blootstellings: 120 (to achieve a desired total duration, e.g., 1 hour).

After setting the parameters, press the main shutter button to start the sequence. The LCD will display the remaining time and shots.

4.4 Draadlose werking

The WTR-2 utilizes 2.4G transmission technology, providing a wireless operating range of up to 196 feet (60 meters).

Image: Wireless operating range of the WTR-2.

Ensure both the transmitter and receiver are powered on and within range for wireless functionality. The receiver's LED indicator will confirm connection status.

4.5 Videodemonstrasie

For a visual guide on setting up and using the AODELAN WTR-2 for time-lapse photography, please watch the following video:

5. Probleemoplossing

If you encounter issues with your AODELAN WTR-2, please refer to the following common problems and solutions:

If the problem persists, please contact AODELAN customer support for further assistance.

6. Spesifikasies

7. Onderhoud

Proper care and maintenance will extend the lifespan of your AODELAN WTR-2.

• Skoonmaak: Use a soft, dry cloth to wipe the surface of the transmitter and receiver. Do not use liquid cleaners, solvents, or abrasive materials.
• Berging: When not in use for extended periods, remove the batteries from both units to prevent leakage. Store the device in a cool, dry place, away from direct sunlight and extreme temperatures.
• Hantering: Avoid dropping or subjecting the device to strong impacts, which can damage internal components.
• Kabelversorging: Do not bend or pull the connection cable excessively. Store it neatly to prevent tangling or damage.

8. Waarborg en Ondersteuning

AODELAN products are designed for reliability and performance. For specific warranty details, please refer to the warranty card included with your purchase or visit the official AODELAN webwebwerf.

If you require technical assistance, have questions about product functionality, or need to report a defect, please contact AODELAN customer support. Contact information can typically be found on the product packaging, the official AODELAN webwebwerf, of deur jou kleinhandelaar.

Aanlyn hulpbronne:

• AODELAN Store on Amazon: Visit AODELAN Store