1. Inleiding
The Technoline WS 8016 is a modern radio-controlled wall clock designed for clear readability and versatile display options. It automatically synchronizes with the DCF-77 radio signal for precise timekeeping. This manual provides detailed instructions for setting up and operating your clock.
Sleutel kenmerke sluit in:
- Radio-controlled time (DCF-77) with manual setting option
- 12/24 hour time format display
- Tydsone-instelling
- Date and weekday display in 7 languages
- Indoor temperature display in Celsius (°C) or Fahrenheit (°F)
- Binnenshuise humiditeitsvertoning in persentasietage relative humidity (% RH)
- Two independent alarm settings
- Flexible placement: wall-mountable or tabletop stand
2. Belangrike veiligheidsinligting
- Lees alle instruksies sorgvuldig deur voordat u die toestel gebruik.
- Hou die toestel buite bereik van kinders.
- Moenie die horlosie blootstel aan uiterste temperature, direkte sonlig of hoë humiditeit nie.
- Use only the specified battery type (2 x AA Mignon LR06).
- Gooi gebruikte batterye behoorlik weg volgens plaaslike regulasies.
- Moenie probeer om die toestel self uitmekaar te haal of te herstel nie. Kontak gekwalifiseerde personeel vir diens.
3. Pakketinhoud
- Technoline WS 8016 Digital Radio-Controlled Wall Clock
- Instructiehandleiding (hierdie dokument)
Let wel: 2 x AA Mignon LR06 batteries are not included and must be purchased separately.
4. Produk verbyview
Familiarize yourself with the clock's display and controls.
Figuur 1: Main display of the Technoline WS 8016 clock. It clearly presents the current time (e.g., 10:30), the radio signal reception icon, two alarm indicators (1 M-F, 2 S-S), indoor temperature (e.g., 23.2°C), weekday (e.g., MONTAG), date (e.g., 29/JAN/2019), and indoor humidity (e.g., 76% RH).
Figuur 2: Physical dimensions of the Technoline WS 8016 clock, measuring 22.5 cm in width and 14.3 cm in height.
Control Buttons (Typically located on the back or side):
- STEL: Gaan na instellingsmodus, bevestig instellings.
- UP / +: Increases values, cycles through options.
- DOWN / -: Decreases values, cycles through options.
- WYSE: Switches display modes, exits setting mode.
- Alarm: Accesses and sets alarm functions.
- 12/24: Toggles between 12-hour and 24-hour time formats.
- °C/°F: Wissel tussen Celsius- en Fahrenheit-temperatuureenhede.
5. Opstelling
5.1 Battery installasie
- Vind die batteryklepdeksel aan die agterkant van die horlosie.
- Verwyder die deksel.
- Insert 2 x AA Mignon LR06 batteries, ensuring the correct polarity (+ and -) as indicated inside the compartment.
- Plaas die batterykompartement se deksel veilig terug.
5.2 Automatic Time Synchronization (DCF-77)
After battery insertion, the clock will automatically begin searching for the DCF-77 radio signal. This process can take several minutes to an hour, depending on your location and environmental conditions.
- Place the clock near a window, away from electronic devices that may cause interference, for optimal signal reception.
- A radio tower icon on the display will flash during signal search and become solid when the signal is successfully received and synchronized.
- If the signal is not received within 10 minutes, try repositioning the clock and wait for the next automatic synchronization attempt (usually hourly or daily).
6. Bedryfsinstruksies
6.1 Handmatige tydsinstelling
If the radio signal is unavailable or you prefer to set the time manually:
- Druk en hou die STEL button for approximately 3 seconds to enter the manual setting mode. The first adjustable value will flash.
- Gebruik die UP or AF knoppies om die flikkerende waarde aan te pas (bv. uur, minuut).
- Druk STEL briefly to confirm the current setting and move to the next adjustable parameter.
- Repeat steps 2 and 3 for all settings: hour, minute, 12/24h format, time zone, year, month, day, weekday language, and temperature unit.
- To exit setting mode, press the MODUS button or wait for 15 seconds without pressing any button.
6.2 12/24-uur-formaat
In normale tyd vertoonmodus, druk die 12/24 knoppie om te wissel tussen 12-uur (met AM/PM-aanwyser) en 24-uur-formate.
6.3 Tydsone-instelling
During manual time setting (Section 6.1), you can adjust the time zone offset (e.g., +1, -1 hour) if your location is outside the standard DCF-77 signal's time zone.
6.4 Date and Weekday Language
During manual time setting (Section 6.1), you can select the display language for the weekday. Options typically include English, German, French, Spanish, Italian, Dutch, and Danish.
6.5 Temperatuur Eenheid
In normale tyd vertoonmodus, druk die ° C / ° F. button to switch the indoor temperature display between Celsius and Fahrenheit.
6.6 Alarminstellings
The clock features two independent alarms: Alarm 1 (typically for Monday-Friday) and Alarm 2 (typically for Saturday-Sunday).
- Druk die ALARM button repeatedly to cycle through Alarm 1, Alarm 2, and Alarm Off display modes.
- To set an alarm, select the desired alarm (Alarm 1 or Alarm 2) and then press and hold the ALARM button for approximately 3 seconds. The alarm hour will flash.
- Gebruik die UP or AF knoppies om die alarmuur aan te pas. Druk ALARM to confirm and move to the alarm minute setting.
- Gebruik die UP or AF knoppies om die alarmminuut aan te pas. Druk ALARM om die alarminstellingsmodus te bevestig en te verlaat.
- Om 'n alarm te aktiveer of deaktiveer, druk kortliks die ALARM button when the alarm time is displayed. An alarm icon (e.g., a bell) will appear on the display when the alarm is active and disappear when it is deactivated.
7. Sorg en Onderhoud
Skoonmaak: Wipe the clock with a soft, dry cloth. Do not use abrasive cleaners, solvents, or chemical agents, as these may damage the display or casing.
Battery vervanging: Replace the batteries when the low battery indicator appears on the display. Always replace both batteries simultaneously with new ones of the same type. Do not mix old and new batteries or different battery types.
8. Probleemoplossingsgids
| Probleem | Oplossing |
|---|---|
| Geen tydvertoning / Verkeerde tyd | Check battery installation and ensure batteries have sufficient charge. Ensure the clock is within range of the DCF-77 signal. If the signal is weak or unavailable, manually set the time as described in Section 6.1. |
| Radio signal icon not displayed or flashing continuously | Move the clock closer to a window or an open area. Avoid placing it near large metal objects or electronic devices (TVs, computers, microwaves) that may cause interference. Wait for the next automatic synchronization attempt. |
| Temperature/Humidity readings are inaccurate | Ensure the clock is not exposed to direct sunlight, drafts, or heat sources (e.g., radiators, appliances). Allow time for readings to stabilize after initial setup or relocation. |
| Alarm klink nie | Verify that the alarm is activated (alarm icon displayed). Check that the alarm time is set correctly. Ensure batteries are not depleted. |
9. Tegniese spesifikasies
- Model: WS8016
- Afmetings (L x B x H): 22.5 x 3.81 x 14.3 cm (8.86 x 1.5 x 5.63 duim)
- Gewig: 404 g (0.89 lbs)
- Materiaal: Plastiek
- Kragtoevoer: 2 x AA Mignon LR06 batteries (not included)
- Tydformaat: 12/24 uur kiesbaar
- Spesiale kenmerke: DCF-77 Radio Control, Indoor Temperature Display, Indoor Humidity Display, Calendar Display, 2 Alarm Settings
10. Waarborg en Kliëntediens
This product comes with a standard manufacturer's warranty. Please refer to the warranty card or documentation included with your purchase for specific terms and conditions.
For technical support, troubleshooting assistance, or service inquiries, please contact your retailer or visit the official Technoline webwebwerf vir meer inligting.