TORQUE Airbag Air Bag Suspension Kit User Manual

Produk verbyview

The TORQUE Airbag Air Bag Suspension Kit (Model TR2400AS) is designed to enhance the load-carrying capacity, stability, ride quality, and braking effectiveness of your vehicle. This kit provides adjustable air support to maintain optimal vehicle height and performance, especially when towing or carrying heavy loads. It serves as a direct OEM replacement for Firestone Ride Rite W21-760-2400 systems.

Image: Complete TORQUE Airbag Air Bag Suspension Kit, including air bags, brackets, and hardware, alongside its retail packaging.

Pasinligting

This air helper spring kit is specifically designed for the following vehicle models and years:

• 2005-2007 Ford F250 (4WD only)
• 2005-2007 Ford F350 (4WD only)

Note: This kit is NOT compatible with vehicles equipped with an in-bed hitch.

Image: Visual representation of compatible Ford F-Series trucks and specific fitment years (2005-2007 F250/F350 4WD only).

Sleutelkenmerke en -voordele

• Load Leveling Support: Provides up to 5,000 lbs of load leveling capacity, ensuring your vehicle remains level even with heavy loads.
• Verbeterde ritgehalte: Reduces inter-leaf friction and softens contact between the axle and frame, minimizing bottoming out.
• Verbeterde stabiliteit: Maximizes the vehicle's safe load-carrying capacity and improves overall stability.
• Better Braking Effectiveness: Contributes to more effective braking performance under load.
• Duursame konstruksie: Air inlets are made from 4140 grade steel, offering 25% more durability compared to OEM 1040 grade steel. Air springs are designed to withstand up to 500 PSI, though 100 PSI is the recommended maximum for safer and more comfortable rides.
• Direct OEM Replacement: Directly replaces Firestone Ride Rite W21-760-2400.

Image: Illustration demonstrating the 5,000 lbs load leveling capacity provided by the air suspension system.

Image: Visual comparison showing a truck towing a trailer without and with Torque Parts Suspension, highlighting improved load leveling and reduced sag.

What's Included in the Kit

The TORQUE Airbag Air Bag Suspension Kit includes all necessary components for a complete installation:

• 2 x Air Bags
• All necessary Brackets
• Installasie handleiding
• All required Bolts and Nuts
• Inflation Valves
• Elmboog toebehore
• Buis

Image: A detailed layout of all components included in the kit: two air bags, various brackets, bolts, nuts, air lines, and inflation valves.

Video: 'n Oorview of the TORQUE Air Bag Suspension Kits, showcasing the components and highlighting their benefits for various vehicle uses like towing and off-roading.

Installasie-instruksies

The TORQUE Airbag Air Bag Suspension Kit is designed for a straightforward, bolt-on installation without requiring any frame drilling. Please refer to the included detailed installation manual for step-by-step instructions specific to your vehicle model.

Algemene installasie stappe:

1. Berei voertuig voor: Park the vehicle on a level surface, engage the parking brake, and block the wheels. Lift the rear of the vehicle and support it with jack stands.
2. Remove Existing Components (if applicable): Follow the manual to remove any existing components that may interfere with the installation of the air springs.
3. Installeer hakies: Position and secure the upper and lower brackets to the vehicle's frame and axle, respectively. The brackets are designed for a no-drill installation.
4. Install Air Springs: Mount the air bags between the upper and lower brackets. Ensure proper alignment and secure attachment using the provided bolts and nuts.
5. Verbind luglyne: Attach the elbow fittings to the air bags and connect the tubing. Route the tubing away from hot or moving parts to the inflation valves.
6. Installeer inflasiekleppe: Choose a convenient and protected location (e.g., bumper, wheel well) to install the inflation valves. Connect the air lines from the air bags to these valves.
7. Kyk vir lekkasies: Inflate the air springs to a low pressure (e.g., 20 PSI) and check all connections for air leaks using a soapy water solution. Tighten connections as needed.
8. Onderste Voertuig: Carefully lower the vehicle off the jack stands.
9. Finale aanpassing: Inflate the air springs to the desired pressure based on your load requirements.

Always consult the comprehensive installation manual provided with your kit for detailed, model-specific instructions and safety precautions.

Bedryfsinstruksies

The TORQUE Airbag Suspension Kit allows you to adjust the air pressure to suit varying load conditions, optimizing ride height and comfort.

Lugdruk aanpassing:

• Minimum PSI: 5 PSI (pounds per square inch)
• Maximum PSI: 100 PSI

Use an air compressor to inflate the air springs via the installed inflation valves. Monitor the pressure with a gauge. Adjust pressure as follows:

• Light Load/Unloaded: Maintain minimum pressure (5 PSI) for optimal ride comfort.
• Heavy Load/Towing: Increase air pressure gradually until the vehicle achieves a level stance. Do not exceed 100 PSI.
• Off-Roading: Adjust pressure as needed for terrain, ensuring not to exceed maximum or fall below minimum.

Proper air pressure ensures even tire wear, improved handling, and prevents bottoming out of the suspension.

Onderhoud

Regular maintenance of your TORQUE Airbag Suspension Kit will ensure its longevity and optimal performance.

• Gereelde inspeksie: Periodically inspect the air bags, air lines, and fittings for any signs of wear, damage, or leaks.
• Kontroleer lugdruk: Check air pressure regularly, especially before and after towing or hauling heavy loads. Adjust as necessary.
• Maak komponente skoon: Hou die lugsakke en omliggende komponente skoon van vuiligheid, puin en korrosiewe materiale.
• Vermy oorinflasie/onderinflasie: Always adhere to the minimum (5 PSI) and maximum (100 PSI) pressure limits to prevent damage to the air springs.
• Wringkrag bevestigingsmiddels: Periodically check and re-torque all fasteners to ensure they remain secure.

Probleemoplossing

Here are solutions to common issues you might encounter with your air suspension kit:

Gereelde vrae:

Q: Will it fit if my vehicle is lifted front and rear?
A: If the front of the truck is lifted, it will fit. If the rear of the truck is lifted, you may need a spacer. Please refer to the spacer table below.

You can search for spacers by part number.

Q: Will it fit if my vehicle is lowered?
A: No, it will NOT fit if your vehicle is lowered.

Q: What should be the minimum and maximum PSI?
A: Minimum is 5 PSI. Maximum is 100 PSI.

Q: Can I use a cradle?
A: Yes, you can use a cradle with this kit. Our cradle part number is TR3004. You can search the cradle by part number.

Image: A graphic detailing frequently asked questions regarding vehicle lift, lowering, PSI limits, and cradle compatibility, including a spacer selection table.

Spesifikasies

Waarborg en Ondersteuning

For warranty information and technical support, please refer to the documentation included with your product or visit the official Torque website. You can also contact customer service through the retailer where you purchased the product.

Vir bykomende hulpbronne en produkinligting, besoek die Torque Store on Amazon.